It does not send iMessage.
It does not send iMessage. The settings are billed correctly. Some of my friends just do not become active (in standby status of activation) for several days. Ukraine. The mobile operator Life.
MMS is a carrier issue... contact Verizon and ensure your account is provisioned correctly. I would think that someone would be intelligent enough to do that before buying a new device, but......
iMessage could be an activation issue or a network issue.
Have you tried Settings > General > Reset > Reset Network Settings?
Does iMessage work consistently on Wi-Fi?
Similar Messages
-
My iphone5 does not send as imessage to other iphone
My iphone does not sends imessage to other iphone.
This support document is for troubleshooting Messages http://support.apple.com/kb/TS2755. Remember both users have to be on iOS5 or above and have a solid data connection at the time you send. Check settings for iMessage on your device and have the receiver check as well. You may need to turn iMessage off and back on again, but read the support document.
-
Iphone4 does not send texts/imessage properly.
I've had this iphone for 18 months and it does not send texts/imessages properly. The iphone will be sending texts completely fine and it will have good 3G connection but then out of nowhere the phone will take over 20 minutes to send texts/imessages. Phone connection is out of the question. it does this on and off very frequently. It started doing it very rarely but its been doing it more and more often.
More info:
My service provider is Verizon wirelessHey Danny,
If you are having issues with Messages being sent, I found a troubleshooting article that will assist with resolving it for you.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
My Iphone 4 is not sending Imessage, but when I turn it off, I can text? What can I do to fix my phone?
iMessage is separate from texting - SMS/MMS.
http://support.apple.com/kb/ts2755 -
Since the upgrade my phone will not send iMessage to other iPhones. I can send from my iPad. When I try and send the message sends 3/4 of the way and then stops and does not send at all
SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
Before the service reset function. Wait 24 hours to activate imessage.go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once -
User created apple id account, verified but know she is unable to log on, it says incorrect password, she tried to reset via forgot password option but it does not send reset password page to here e- mail address, how can i get this sorted? or how can i get her whole apple account deleted and created new one using same e - mail address?
The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.
-
I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.
If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues. -
All of a sudden this morning my iphone will not send imessages from my phone....
Hi Chas869,
Hmm, that is strange that your phone number is greyed out. There are a few things that we can try. First would be to turn iMessages off, then back on. See if you are able to select your phone number. Then if that doesn't work, turn iMessages back off, then reset the network settings....settings>general>reset>reset network settings, this will reboot the phone. Don't worry, it won't delete anything from the phone, it simulates a battery pull. Once the device comes back on, then turn iMessages back on. Keep us posted if that works!
ErinW_VZW
Follow us on Twitter @VZWSupport -
My problem is simply that Mail does not send email.
I have just migrated from iMac G5 to iMac Intel by using Migration Assistant. Everything else works just fine and I can receive email. However, if I try to reply, forward or send a new email message, Mail just does not do anything - no error message, nothing.
The fixes I have tried so far are removing the Mail plist file, repairing disk permissions and mailboxes. Of course, I have checked the account settings, especially outgoing server settings. I also reinstalled Mail application with Pacifist. None of this has solved the problem. I have tried sending email with Thunderbird and it works with no problems.
Does anybody have any suggestions how to fix this issue?
The OS is 10.4.8, Mail Version 2.0.6 (749.2/752.3), all the suggested software updates done.
iMac Core Duo 20" 2GHz Mac OS X (10.4.8)Reinstalling Mail is rarely necessary or appropriate to solve a problem. It certainly cannot fix anything that could be wrong within your home folder or at the server or with the network, and may even introduce new issues if not done properly. Moreover, in Mac OS X 10.4 you don’t need Pacifist to reinstall Mail, you could also do it as described in the following article:
Custom installs in Mac OS X 10.4
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, if the version of the system software on your install disks is earlier than what you’re using now (and only in that case), then you must also reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, to bring Mail back in sync with the rest of the system:
About the Mac OS X 10.4.8 Combo Update
Mac OS X 10.4.8 Combo Update for PPC
Mac OS X 10.4.8 Combo Update for Intel
The above won’t solve the problem. It’s just to ensure that you’ve properly reinstalled Mail, which you shouldn’t have done, and which apparently you didn’t do properly -- the version of Mail on your system should be 2.1.1, not 2.0.6.
The original problem could be caused by some Launch Services cache or preferences corruption. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer. -
My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your helpI'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field. -
After Migration Exchange 2013 does not send mail outside the organization
Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin HossainWhat I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25. -
Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks
In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu. -
ICloud IMAP server does not send the CAPABILITY with CRLF
IMAP iCloud server does not send the CAPABILITY response with CRLF appended as per RFC 3501. Please find the log snippet
11-05 10:50:52.462 29603 29988 D Email : open :: socket openjava.io.BufferedInputStream@43a726a8 | java.io.BufferedOutputStream@43a72b68
11-05 10:50:52.502 29603 29988 D Email : <<< #null# ["OK", ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"], "iSCREAM ready to rumble (1S:1092) st11p00mm-iscream023 [42:4469:15:50:53:39]"]
11-05 10:50:52.502 29603 29988 D Email : >>> 1 CAPABILITY
11-05 10:50:52.552 29603 29988 D Email : <<< #null# ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"]
11-05 10:50:52.562 29603 29988 D Email : <<< #1# ["OK", "!!"]
11-05 10:50:52.582 29603 29988 D Email : >>> [IMAP command redacted]
11-05 10:50:52.682 29603 29988 D Email : <<< #2# ["OK", ["CAPABILITY", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "ACL", "QUOTA", "LITERAL+", "NAMESPACE", "UIDPLUS", "CHILDREN", "BINARY", "UNSELECT", "SORT", "CATENATE", "URLAUTH", "LANGUAGE", "ESEARCH", "ESORT", "THREAD=ORDEREDSUBJECT", "THREAD=REFERENCES", "CONDSTORE", "ENABLE", "CONTEXT=SEARCH", "CONTEXT=SORT", "WITHIN", "SASL-IR", "SEARCHRES", "XSENDER", "X-NETSCAPE", "XSERVERINFO", "X-SUN-SORT", "ANNOTATE-EXPERIMENT-1", "X-UNAUTHENTICATE", "X-SUN-IMAP", "X-ANNOTATEMORE", "XUM1", "ID", "IDLE"], "User test logged in"]
11-05 10:50:52.682 29603 29988 D Email : >>> 3 CAPABILITY
11-05 10:50:52.742 29603 29988 W Email : Exception detected: Expected 000a (
)1-05 10:50:52.742 29603 29988 W Email : ) but got 000d (
This is happening only when CAPABILITY command is sent follwed by LOGIN command. Please check this issue.If you want your mail delivered properly the Official Host Name of the sending server should match the PTR (reverse DNS) of the sending IP Address, and there should be an "A" record that matches the OHN as well.
Example:
mail.yourdomain.com (Official Host Name) on 123.123.123.123
PTR for 123.123.123.123 should match mail.yourdomain.com
There should be an A record in yourdomain.com pointing to 123.123.123.123
Kostas -
My simple chat server does not send messages to connected clients
Hi!
I´m developing a chat server. But I can not get it work. My client seems to make a connection to it, but my server does not send the welcome message it is supposed to send when a client connects. Why not?
removedEdited by: Roxxor on Nov 24, 2008 10:36 AMOk, I solved my previous problem and now I have got a new really annoying one.
This is a broadcasting server which meand it can handle multiple clients and when one client sends a message to the server, the server should broadcast the message to all connected clients. It almost works, except that the server just sends the message back to the last connected client. The last connected client seems to steal the PrintStream() from the other clients. How can I solve that?
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.lang.Character;
import java.io.OutputStream;
import java.util.Vector;
public class ChatServer extends MIDlet implements CommandListener, Runnable
private Display disp;
private Vector connection = new Vector();
private TextField tf_port = new TextField("Port: ", "", 32, 2);
private Form textForm = new Form("Messages");
private Form start_serverForm = new Form("Start server", new Item[] { tf_port });
private Command mExit = new Command("Exit", Command.EXIT, 0);
private Command mStart = new Command("Start", Command.SCREEN, 0);
private Command mDisconnect = new Command("Halt server", Command.EXIT, 0);
ServerSocketConnection ssc;
SocketConnection sc;
PrintStream out;
public ChatServer()
start_serverForm.addCommand(mExit);
start_serverForm.addCommand(mStart);
start_serverForm.setCommandListener(this);
tf_port.setMaxSize(5);
textForm.addCommand(mDisconnect);
textForm.setCommandListener(this);
public void startApp()
disp = Display.getDisplay(this);
disp.setCurrent(start_serverForm);
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command c, Displayable s)
if(c == mExit)
destroyApp(false);
notifyDestroyed();
else if(c == mStart)
Thread tr = new Thread(this);
tr.start();
else if(c == mDisconnect)
try
sc.close();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
destroyApp(false);
notifyDestroyed();
public void run()
try
disp.setCurrent(textForm);
ssc = (ServerSocketConnection)Connector.open("socket://:2000");
while(true)
sc = (SocketConnection) ssc.acceptAndOpen();
connection.addElement(sc);
out = new PrintStream(sc.openOutputStream());
textForm.append(sc.getAddress() + " has connected\n");
ServerToClient stc = new ServerToClient(sc);
stc.start();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
catch(NullPointerException err) { System.out.println("NullPointerException error: " + err.getMessage()); }
class ServerToClient extends Thread
String message;
InputStream in;
SocketConnection sc;
ServerToClient(SocketConnection sc)
this.sc = sc;
public void run()
try
in = sc.openInputStream();
int ch;
while((ch = in.read())!= -1)
System.out.print((char)ch);
char cha = (char)ch;
String str = String.valueOf(cha);
out.print(str);
//broadcast(str);
textForm.append(str);
in.close();
//out.close();
sc.close();
catch(IOException err) { System.out.println("IOException error: " + err.getMessage()); }
}
Maybe you are looking for
-
Hello Gurus, I am new in adf and using jdev 11.1.2.3. I am developing application in which i am using dynamic shell UI. The structure of application is i have one main application modules with the UI shell. The other modules are developed in separate
-
MRP view in material master creation
Hi Guys, Can anyone tell me how to change the settings for field dependency. My requirement is to use only the filed for "reorder point" in MRP view and do not enter any other data like MRP type or lot sizing etc. I have tried changing the setting fo
-
Disable/Always Hide Tools Pane? (Reader DC)
How do you disable the Tools Pane from showing every time you open a PDF file? I keep having to hide it and it gets annoying after awhile when one doesn't need it.
-
Can't connect to GameCenter server?
I signed out of GameCenter earlier today and now I can't sign back in. Yes I'm typing in the correct Apple iD. I tried using both wifi and 4G LTE. It says "Cannot connect to GameCenter server". I'm using an iPhone 5 running on iOs 7.0.2
-
ITunes and iPod not syncing properly...please help
When i sync my 60GB video iPod with iTunes it starts to work, a few files or podcasts are copied then it seems to get "stuck" then an error message appears: attempting to copy to the disk "My Ipod" failed. The disk could not be read from or written t