It does not start at all

firefox does not start

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • Firefox does not start at all, cpu usage is 100%

    I have tried installing different versions of Firefox, but all of them have the same issue - the browser does not start at all, no error messages, cpu usage is 100% in task manager, so have to shut it down there.

    Hello Zubeyir.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    If you need help installing Firefox, see this:
    http://support.mozilla.com/en-US/kb/Installing+Firefox

  • ITunes does not start at all!!!

    ITunes does not start at all this morning. ( I have a MacBook). I never got this problem before.
    What to do?? I restarted my PC already and nothing happens.

    Sorry, it is starting, but not playing!!!!!!!!

  • Ovi Suite does not start at all

    Hi folks,
    I just finished the installation of the Ovi Suite, but when I dbl-click on it
    or start it via Start - Programs... it does not start at all. There is that error
    message in the event log:
    18/07/2010 20:55:01 (OviSuite) - ERROR   - DAL_Plugin_PCCS,  Thread  10, Line 168,    .\Application\CDalPCCSDevice.cpp, CDalPCCSDevice::getHandle(): DAL failure detected: (102) converted from PCCS error [0x80100023: Device do not support operation] / DA_OpenCA / @ CDalPCCSDevice::getHandle (.\Application\CDalPCCSDevice.cpp:168)
    Anyone with an idea what could be wrong?
    The Nokia PC Suite works e.g. for contact entries (but doesn't seem to work for the latest maps stuff).
    Thanks,
    roveda

     Hi,
    I am not sure this will solve your problem but you can try this once.
    1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
    2. Delete the files from here If anything is there
    C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
    C:\Documents and Settings\user\Local Settings\Application Data\Nokia
    C:\Documents and Settings\All Users\Application Data\OviInstallerCache
    3. Restart Computer.
    4. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
    5. Restart Computer
    6. now run NOS
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Hello...I´ve just updated my Iphone 4 with 5.1.1. and my Iphone does not start at all....Nothing... Help pls

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • Quick Time pro does not start at all  and gives an error "Fehler 46: K"

    I installed QT pr0 without problems. But QT does not start. After doubleclicking there is a short message with the above error code "Fehler 46:K" No movie can be played is thera any support for pro customer`? Is the Problem known? Installing and uninstalling does not help. Procedures recommanded from apple - empty temp etc. did not help either. Google did only find 2 posts none with valuable information.

    As I'm sure you are already aware, that HDD has failed to the point it cannot find a bootable volume.
    If you have a backup, no worries.
    If you do not have a backup, you could try to reinstall the operating system and get the disk to a state in which it will at least mount. Then, copy whatever information remains intact to another disk. I would be inclined to replace the drive now, install the failed one in an external enclosure, and attempt to extract whatever information you need from it.

  • Firefox does not start at all never

    I resetted my computer, i have formatted it. I reinstalled firefox, but it wont open at all. Plz help
    == This happened ==
    Every time Firefox opened
    == I resetted my com ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0)

    Hello Zubeyir.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    If you need help installing Firefox, see this:
    http://support.mozilla.com/en-US/kb/Installing+Firefox

  • Firefox does not start at all

    I cannot use Firefox at all now. It simply will not start up. I've been through the troubleshooting section and it appears something was corrupted when it closed. However, the advice to create a new profile can't help either as it won't let me.
    I have various saved information for websites which I don't have to hand elsewhere, so really need Firefox to work. Is there any way of solving this?

    Hello Zubeyir.
    Hopefully this support article is what you need:
    https://support.mozilla.com/en-US/kb/Firefox+will+not+start
    If you need help installing Firefox, see this:
    http://support.mozilla.com/en-US/kb/Installing+Firefox

  • My computer does not start up all the way

    When i start my computer up, it goes through all the steps, but my hard drive never loads and just the wallpaper and the spotlight show up. I have to force quit and start the computer in safe mode and then restart the computer to get it to start all the way. Is there any thing that can be done so that my computer starts right all the time the first time?

    annie1977-
    Greetings and welcome.
    Try booting from the system install CD/DVD by putting the disk in the drive and starting up while holding down the c key.
    After boot-up find the Disk Utility, either on the desktop or under the Apple menu. Select your startup drive and the repair permissions on that drive. See if that helps.
    Luck-
    -DaddyPaycheck

  • My Blackberry does not start up, all I get is a red line through the battery

    Hi this is my first Blackberry and seven months after purchace I phone stops working. All I get when I turn it on is a red line through the battery. I bought a new battery and the same thing. I am like at wits end, HELP!

    #1. Be patient with #2.
    #2. Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    Message Edited by JSanders on 08-02-2009 11:18 PM
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Photoshop Elements 7 does not start (after 3 years i used it)

    Yesterday, when i opened my Photoshop Elements 7 (I use it on my PC from 3 years), after the splash screen, an alert windows says to me that there is an error and suggested to restart PC or reinstall product. The program automatically closed itself.
    I'm not able to write the exact sentence of the alert, because now PE7 does not start at all. Not even the alert with the error message.
    I always used this product in this 3 years (from this PC), without problems.
    PE7 was preinstalled and pre-registered by the constructor of PC (Sony-Vaio). So, now i have not even the registration key to reinstall PE7.
    Furthermore, I tried to open Adobe Premiere Elements 7 (also, preinstalled and pre-registered, but never used), and after splash screen the program automatically close itself.
    What can I do??!?
    Thanks you all.

    No result by disconnecting from the network. Even if I restart PC.
    But.... I SOLVED the problem!!!!!
    The problem was "FLEXnet Licensing Service"
    Thanks to last tip, that leads to another failure... I remembered that 2 days ago I tried to optimize my PC by stopping some service with MSConfig. One of the disabled services was "FLEXnet Licensing Service".
    Searching in google, now i know that "Flexnet Licensing service is used by most Adobe products to prevent piracy".
    So, some Adobe products do not start, if Flexnet Licensing service is not running.
    Thank you very much for tips, and help in general... very helpful (to investigate the nature of the problem).

  • Flex profiler does not start up

    I am using Flex Builder 3.0 Pro plugin for Eclipse 3.3. Flex
    profiler does not start at all. Do I need to configure project
    setting somehow in order to enable profiler?

    Just in case anybody wants to know... it was Profiler port conflict with application running on my desktop.

  • FMLE 3 and 3.1 does not open at all in vista

    Hi,
    Adobe FMLE 3 and 3.1 does not start at all in vista. Its a 32-bit machine. 512MB RAM. Can anyone give me some clues?
    Thanks

    It happend to me to on windows 7, when I exchange Black magic car with Ospray. After I uninstalled drivers for black magic, FMLE started fine.

  • Aperture does not start after iphoto update

    Hello,
    It seems that recent update to iphoto made Paerture not to start.
    At first attempt, Aperture opened the window, but never went into normal and beach ball was over the blank window, no functions worked.
    After Force quit, it does not start at all:
    From dock it just silently does not start and from Launch pad the error:
    "The application "Aperture" can't be opened
    -1712"
    is displayed.
    What could this be and how to make Aperture working again.
    This is Mavericks, 2012 MacBook Pro, Hires.
    Thanks a lot

    Computer reboot solved the issue.
    Aperture now sarts normally.

  • Lightroom CC does not start on an iMAC.

    Hello, I downloaded and installed Lightroom CC on my iMAC (Late 2009, i7 CPU, Yosemite OS) and it does not start at all. I can see for second the welcome window before it closes without providing any error message!?
    Could be a software bug or a configuration problem?

    Hi
    please sign out from the creative cloud and sign back in
    check the link for instructions
    Sign in, Sign out | Creative Cloud desktop app 

Maybe you are looking for

  • Problem with Bex query

    Hi , I crated a query based on a Infoset.I am trying to run that in RSRT and it gives me this erroe.Can anyone tell me how to resolve this probelm?? Error :  Query could not be opne! GENUNID is INVALID , Message no.BRAIN665

  • SOA suite composite interdependency

    Hi All, I am facing a typical problem. We have AIA FP on top of SOA suite 11g (11.1.1.5). Here when we call a provider ABCS ( a BPEL composite) from EBS (a mediator composite) rather than providing direct endpoint in the reference we refer the concre

  • Help with moving an external HDD from old MBP to brand new MBPwRetina

    We just bought a brand new MacBook Pro and are trying to use the external HD  from our 4yo Macbook (data has been removed already), and we've tried some of the things in other similar threads and it's not working. The old macbook is running OSX 10.6.

  • Bug Tracker Packaged application installation Error.

    Hi, I installed 11g (apex came with 11g) and 10g application server. Now, I am trying to install the bug tracker application that came on apex.oracle.com. I am getting this error right off the bat. SQL*Plus: Release 11.1.0.6.0 - Production on Mon Oct

  • Excel Functions Do Not Work When Data Source is BW

    Hello, My platform is, BOBJ BI 4.0. Data source is SAP BW. BW is connected to XCelsius with BEx. My problem is, excel functions do not work when data source is BW. For example, Excel cell A1=quantity1  B1= quantity2   C1= excel function "=A1+B1" When