IT DOES NOT WORK IN NETWORK (APEX + Oracle XE in XP)

Hi there!
I am beginner in Apex and Oracle XE. So I have met some trouble.
I have installed Oracle 10g XE to Windows XP. It was easy. Then I started DB home by url: http://127.0.0.1:8080/apex. It works. But my PC has Network card with persistent IP address 192.168.1.150. So I try to connect by url: http://192.168.1.150:8080/apex . It DOES not work. I switched off firewall. It does not work. Please give me some suggestion or advise how to solve it.
Thanks in advance.
Ulan

Ulan,
1) The XE discussion forum is at: Oracle Database Express Edition (XE)
2) Your specific problem is addressed here:
http://download-west.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/network.htm#BHCBCFBA
Joel

Similar Messages

  • Imovie 10.0.4 does not work on network account

    iMovie 10.0.4 works perfectly on local account but when logon with network account iMovie does not work.

    Have you contacted your Network Administrator?
    There is not nearly enough information for us to begin to help you.
    ÇÇÇ

  • Primary network does not work, guest network does work

    I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

    After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

  • ICloud for pages app not working on network users having home folder on Mac Mini Lion server

    Does anyone know how to make iCloud for pages work on network users having home folder on server, having home folder on local Client iCloud for Pages works fine but when home folder is on Server iCloud for Pages app does not work. My Clients are Running Mountain Lion 10.8.2, my Server is a Mac Mini Lion Server.

    Hi Tim,
    No fix yet, my home folders reside on a thunderbolt external hard drive, I also tested having home folders on default server HD and no changes, I called Apple Support a while ago, they replicated the issue, it just does not work on network users, they did not say when will it be fix.
    The version of Pages I am using is from the Apple Store.
    Hector

  • Oracle dbms.set_role does not work in APEX application

    Hi, in our j2ee applications, we use secure application role. Basically, the data source use the app user schema to connect to the database. the app user only has create session privileges. the database logon trigger will copy a set of attribute to the local secure context. (ip address, session user, client id, application name). The applications explicitly invoke the stored procedure sec_mgr.set_role before any DMLs are executed.
    the sec_mgr.set_role will check the local context attribute , authorize the ip, application name, and set an appreciated role to this session based on session user.
    we want to apply the same framework to the APEX application. First, we change the paring schema to the app schema which only has create session privilege. then we put the plsql code in which sec_mgr.set_role is called in the application builder --> shared components ---> edit security attribute ---> Virtual Private Database (VPD).
    however, we got the error ORA-06565: cannot execute SET ROLE from within stored procedure
    the sec_mgr.set_role is defined as invoker's right(AUTHID CURRENT_USER)
    do i missing something in APEX to get it work?
    Thanks

    Please explain it does not work in APEX? Is the application updating tables that have a trigger? APEX does NOT override trigger actions. Is it possible the values your trigger is looking for are NOT available in your APEX application? Can you post the trigger code here for review?
    Thank you,
    Tony Miller
    Webster, TX
    What if you really were stalking a paranoid schizophrenic... Would they know?
    If this question is answered, please mark the thread as closed and assign points where earned..

  • Dynamic image does not work in the template builder plug-in (Apex-BI Intgr)

    Hi all, I posted this problem in the BI Publisher topic but nobody responded maybe this is because mods thought this is an Apex-BI integration issue.
    If I'm in the wrong place, please do warn me.
    The documentation says:
    Direct Insertion
    Insert the jpg, gif, or png image directly in your template.
    ...This works obviously
    URL Reference
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{'http://image location'}
    For example, enter: url:{'http://www.oracle.com/images/ora_log.gif'}
    ...This works too when I hardcode an url as url:{'http://www.google.com.tr/images/firefox/mobiledownload.png'}
    Element Reference from XML File
    1. Insert a dummy image in your template.
    2. In Microsoft Word's Format Picture dialog box select the Web tab. Enter the following syntax in the Alternative text region to reference the image URL:
    url:{IMAGE_LOCATION}
    where IMAGE_LOCATION is an element from your XML file that holds the full URL to the image.
    ...This, however, does not work.
    I use Apex' report query tool and My query is like
    select 'http://www.google.com.tr/images/firefox/mobiledownload.png' IMAGE_LOCATION from ... (a single result set for my template)
    the xml data is generated with an IMAGE_LOCATION tag. I load it to word template plug-in. The Url successfully displays in the report if I make it a plain-simple field.
    But when it's in the image format->web->alt text as url:{IMAGE_LOCATION} no image displayed.
    I need to keep this design procedure simple so a simple word user could design a report via using just template builder plug-in. I don't wish to explore the xsl-fo area...yet.
    Could you tell me why I can't get this url:{IMAGE_LOCATION} to work?
    Regards
    PS: My BI version: 10.1.3.4.1

    Hi Oeren,
    your steps seem basically to be correct. I have a tutorial how to do this here (in german)
    http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/pdf-dyn-images/index.html
    when you see the URL corrently as long as you have it as a plain text field, the XML tag and the
    referencing seem to be OK.
    Here are two thought - the issue might be one of these ...
    How did you insert the dummy image into the word document - did you do it via "insert" or
    via "link to file". "Link to File" does not work - you must choose the simple "insert".
    Another one: Does your BI Server have a connection to the internet - is the proxy server correctly set ..?
    Does this help ..?
    Regards
    -Carsten
    Cloud Computing mit APEX umsetzen. Jetzt!
    http://tinyurl.com/apexcloudde
    SQL und PL/SQL: Tipps, Tricks & Best Practice
    http://sql-plsql-de.blogspot.com

  • Mapping Network Drive for external user does not work

    I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
    Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
    I am able to map this network drive when using [email protected] as user.
    However when trying to do this for the user [email protected] I am not able to map the drive.
    I am testing this in order to simulate the client to map the network drive.
    Logging on the beehiveonline with the user id [email protected] works fine.
    Your help will be greatly appreciated.

    Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
    I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
    Try again and let me know how it goes.
    Phil

  • SWP 6.4 install on second computer in wifi WIN 7 network does not work for me.

    Installed on my desktop, works fine. Installed on my Laptop, does not work.
    As administrator I see the clip window, can open and close it but no menu, so I cannot use it.
    As user the switch in the toolbar is there but it does not activate the clip window.
    On both machines the OS is Win 7 Home Premium, the printer is the Smart 109B. Printing through Wifi to my printer which is attached to my desktop as a USB-printer works fine. But i take it the real printing is not involved in working with SWP. Maybe networking but I cannot find any hint. Pse help me.
    Henk

    Hi Tomasz,
    as I figured out, this problem is related to the usage or measurement of the InDesign-document  at least for me.
    I create two portrait-oriented InDesign Layouts.
    For the first I choose Print-usage in the New Document-dialog.
    For the second I choose Web-usage in the New Document-dialog.
    The first will render as bitmap (wrong).
    The second will render as PDF (correct).
    Folio- and Article-Image-Type is set to PDF in both cases.
    Strange behavior.
    Regards
    Ingo
    Am 06.09.2011 um 15:52 schrieb Tomasz Kuczborski:
    OK. Ingo, have a look:
    attached below is what you see whenever you create new article. So, if you create 10 articles, you have 10 opportunities to set the rendering intent differently. I think this is wrong, as the image format setting applies to the whole folio. Or maybe it has changed recently? If not, the least what should happen is a warning, that your new choice changes the actual setting.
    Cheers,
    Tomek
    http://forums.adobe.com/servlet/JiveServlet/showImage/81969/ScreenShot2011-09-06at15.46.58.png
    >

  • Datasocket does not work with two network cards

    If I have two ethernet card in a PC. The Datasocket server does not work if the second card is enabled. It keeps displaying resolving IP Address. I am wondering if there is a solution for this problem.
    Thanks 

    Thanks for you reply. One card has a static address(10.20.35.1), which is used for Data socket, and the other card uses a dynamic IP address. The card with dynamic address is only used for connecting the PC to the company’s network.
    The second card, when turned on causes the Datasocket server problem. In the Datasocket Server manager I have only two IP addresses under Permissions Groups. (10.20.35.1 and 10.20.35.11. 10.20.35.11 is the IP address of the remote PC with labview application. The Datasocket is used to transfer data between the two PC’s)
    I am wondering if my set up for hosts in Datasocket Server manager is not correct.

  • Insert in Tabular form does not work after the upgrade to APEX 4.0

    Hi all,
    Thx in advance for looking into the issue.
    We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
    1) The Tabular form insert does not work.
    2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
    The tabular form was working fine in APEX 3.2.
    The Update and Delete works just fine.
    Any help in this regard is highly appreciated.
    Thx and regards,
    Mahesh

    Here is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
    1     PAGE ATTRIBUTES               
              JAVASCRIPT          
              FUNCTION AND GLOBAL VARIABLE DECLARATION          
                   var htmldb_delete_message='"DELETE_CONFIRM_MSG"';     
    2     DELETE BUTTON               
              ACTION WHEN BUTTON CLICKED          
              URL Target          change to
                   javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');     
    3     ADDROW BUTTON               
              ACTION WHEN BUTTON CLICKED          
              Action           
                   redirect to URL     
              URL Target          
                   javascript:addRow();     
    4     PROCESS               
              APPLYMRU (activitated by button ADDROW)          
              CONDITION          
                   never or delete     
    5     PROCESS               
              ADDROWS          
              CONDITION          
                   never or delete     
    6     CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.               
    7     IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW               
         1. In the page footer put <a name="bottom_of_page"></a>                
         2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:               
         - edit "ADD" button               
         - Go to "Action when button Clicked" section               
         - Amend "URL Target" from               
         javascript:addRow();                
         to               
         javascript:addRow();window.location='#bottom_of_page' ;               
    regards
    PaulP

  • After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
    2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

  • Splitting does not work on a networked drive.

    My iPhoto Library is on a following networked drive connected by cat6.
    Linux:CentOS 4.2+samba 3.0.10-1.4E.12.2.
    In this environment, splitting photos does not work. When splitting photos, initially photos are splitted into two events. Then I change a event's name from 'untitled event' to something.
    After that, new directory is created automatically to store photos of new event, and then photos of a new events are moved into this new directory. However, in actuality, new direcotory was created and was renamed, but none of photo was moved from an original event directory into a new directory. As a result, iPhoto lost links for these photos, and I can't access these photos any more.
    I think permission of iPhoto Library is correct. Because I can add, edit and delete photos manually within iPhoto.
    As a workaround, I create a new event first manually, and then cut & paste photos into that from an existing event.
    According to posted topics in this forum, it seems that iPhoto contains a problem when iPhoto Library is stored on a networked drive. Is this also an issue that only Apple can fix...?
    Any hint would be grateful.
    Thanks in advance.

    My problem was also solved. The root cause of this problem was ':'. When splitting events, iPhoto attempts to create a folder named like '2007:08:16' temporarily. In my case, as I described my Library was stored on a Linux Server via the Samba. But the Samba refuses a folder name which is including ':'.
    That's why, iPhoto was not able to create this temporary folder.
    To solve this problem, you have to throw the Samba away and use another file sharing architecture. I decided to use netatalk. Netatalk can accept ':' as a folder name.
    I already installed the netatalk on my Linux Server actually and tried splitting events. As a result, iPhoto was able to split events as expected.
    FYI:
    From my understanding, most of NAS products are using the Samba as their architecture. People using NAS has a possibility to face this problem.

  • I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine.  Are there any solution available?

    I have upgraded to Lion  OS only to find that my NAS (Iomega Home Media Network hard drive) does not work.  It tells me that it is not configured.  Are there any solutions .  Have Iomega sorted out the problem?

    Same issue here.  Based on what I can tell, iomega still has not developed a solution to the problem.  See below:
    https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

  • Firefox worked on my laptop in UK, but here in USA, it does not work on my Brighthouse Wireless Network, but Internet explorer does. What setting do I ned to change?

    As above, I have also tried downloading a later version, also tried downloading Google Chrome, none work. I have tried using my laptop at several different wifi connections in USA and Firefox does not work on any. So it is not a wifi set up problem in our home in USA. I am running X.P and I.E 6. When I downloaded I.E 8 that would not work either, so I had to re set the laptop back to a date a week ago.
    Unable to access certain bank sites with I.E 6, that is why I use Firefox. Any suggestions appreciated.
    This is the message I get
    "Unable to connect
    Firefox can't establish a connection to the server at webmail.apscontrol.com.
    The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Maybe you are looking for