It doesn't recognize my ipod.

I plug in the USB after opening Itunes and nothing happens. I run the diagnostic and everything is fine, but it says the ipod is not connected.

Try putting your iPod into recovery mode. See http://support.apple.com/kb/HT1808

Similar Messages

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • I just bought an iPod nano 7th gen.  When I connect it to my laptop, it doesn't recognize the ipod.  I tried charging it, but now it won't turn on when i push the power button.  Please help me!  I don't want to have to return it.

    I just bought an iPod nano 7th Generation.  When i connect it to my laptop, it doesn't recognize the ipod.  I tried charging it but when I hold the power button, nothing happens.  I don't want to have to return it.  Please help me!

    Hi dnix257,
    Welcome to the Support Communities!
    What version of the Windows Operating System do you have?
    What version of the iTunes software?
    The troubleshooting steps below may help you with this:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Judy

  • I updated to iTunes 10.2.2, and now it doesn't recognize my iPod Touch!

    I updated my computer to Snow Leopard, and I was prompted to update iTunes to 10.2.2. Okay, did that. Now iTunes doesn't recognize my iPod whatsoever! But my computer does as a whole: i.e., Aperture automaticaly opens as it usually does when I plug in my iPod.
    So this is great. And there's no bug fix; I've googled for the past hour now. Is anyone else having this issue and is there a fix? Because for now, I can't update my iPod at all!

    Have you seen this article yet?
    http://support.apple.com/kb/ts3540
    If nothing else, try upgrading to iTunes 10.3.1.
    B-rock

  • My desktop all of the sudden doesn't recognize my iPod Nano when I plug it in (gives me an error message).  I've tried everything!  HELP!

    Up until yesterday, my nano was syncing just fine with my iTunes.  Out of the blue my brand new desktop doesn't recognize my iPod Nano device.  I have tried uninstalling/reinstalling iTunes.  I've worked through all the diagnostics apple had to offer... but nothing.  Can you help?

    Does this problematic song play okay in iTunes?  Have you tried removing and resyncing it to your device via iTunes?
    B-rock

  • Updated itunes now it doesn't recognize my ipod nano 6

    updated itunes now it doesn't recognize my ipod nano 6

    Hello mhill10633,
    Based on your post, it sounds as if your device is not recognized by iTunes for Windows. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT2907 My laptop doesn't recognize my ipod nano 4th generation. What can I do?

    I connect my IPod to the laptop and it doesn't recognize it. My laptop doesn't recognize my iPod and Itunes neither.

    Hi Kegozz,
    Welcome to the Apple Support Communities!
    If your iPod nano is not recognized in your computer or iTunes, please use the links in the attached article for assistance troubleshooting. Please follow the correct link towards the bottom of the article based on if you are using an Apple computer or Windows computer.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Have a great day,
    Joe

  • My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

    My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

    Hello Fercho1998,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device connectivity issues:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

  • I updated my itunes and now it doesn't recognize my ipod touch

    Ever since I updated my itunes to the latest version, it doesn't recognize my ipod therefore I can't sync new songs onto it.
    I tried following these apple help steps http://support.apple.com/kb/TS1363?viewlocale=en_US but am stuck on #4-11...for some reason I can't delete the Temp folder because it's saying I still have a program open but I'm sure I've closed everything!

    You want this article. The article you cited is for regular iPod, not iPS Devices (iPod touch, iPhone and iPad)
    iOS: Device not recognized in iTunes for Windows

  • ITunes doesn't recognize my iPod...Help

    My iTunes doesn't recognize my iPod at all.The iPod charges on the computer perfectly but iTunes doesn't recognize it (as in the iPod doesnt show up in iTunes) which makes it impossible to download songs to the iPod. Any answers or suggestions to this problem would be appreciated. Please and Thank you

    nayachristine wrote:
    This happened to me once... I was told to hold the menu button and the center button until the apple appeared in the screen... after I did it my iPod would show up as a divice on iTunes.... I don't know if that helps.
    That worked for me, too! I had been so frustrated because I tried everything else, then I finally just reset it (holding menu & center button until Apple Inc. logo showed up, and it worked!

  • Why is my computer doesn't recognize my Ipod Touch?

    My computer doesn't recognize my Ipod Touch. Any suggestion?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • I have an old version of itunes installed in my iPod.I had a syncronize mistake and I tried to change iTunes to 10.4.1. Now iTunes doesn't recognizes my ipod because of the difference between versions. What can I do?

    I have an old version of itunes installed in my iPod.I had a syncronize mistake and I tried to change iTunes to 10.4.1. Now iTunes doesn't recognizes my ipod because of the difference between versions. What can I do?

    I reinstalled the current version of iTunes, 8.2.1.
    Current version?? Did this post appear out of a time warp?  The current version is 10.7!
    http://www.apple.com/itunes/download/

  • Mac OS X 10.6.3 doesn't recognize my iPod touch 3.1.3

    Help please. My Mac OS X 10.6.3 doesn't recognize my iPod touch 3.1.3, I am using Xcode 3.2.3 now. My iTunes is 9.2.1(5). What will I do?

    Have you tried here:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Is there any reason your OSX is not updated to the latest 10.6.7 and iTunes to 10.2.X?  That may also help.

  • IPod Updater doesn't recognize my iPod anymore

    The iPod Updater doesn't recognize my iPod Nano anymore. Only Windows recognizes it.
    What should I do now?

    Try downloading the Latest iPod Updater and then Restoring the iPod to factory settings.

Maybe you are looking for

  • BLOB column's image is not showing up in Forms

    Hi All, I am using Forms 10g. I created a default form (using wizard) for a table that has a BLOB column. Form builder automatically created an image item that corresponds to the BLOB column. The problem is that when I run the, the image item is alwa

  • [CS3 JS]  Reading TXT file content into String

    Hello, I'm currently wanting to display a dialog box that has a dropdown menu containing all countries of the world. I have an external txt file that contains a list of all countries. I thought I would simply read-in the contents of the 'txt' file in

  • Cannot select Contact/Group from Recent Contacts L...

    A group contact in my Recent Contacts list cannot be selected. A few days ago, a group call was held and I missed the initial requests. The 3rd request I accepted. However, the contact list entry still lists it as 2 "new" events, and attempting to cl

  • Security restriction in LoginModule?

    I have implemented my own LoginModule. In the module, I try to reference an EJB. When I call PortableRemoteObject.narrow(), I get the following error: java.lang.ClassCastException: Cannot narrow remote object to net.lm.uams.service.ejb.UserAccountMan

  • BC 2 XI

    Hi, we are replacing BC with XI. I have gone through the documentation of BC and some blogs realted to the migration. can somebody guide me how to find mapping relations, data types, and the flow. I see services and flows in BC and how can i replace