It doesn´t work weblogic sever 10.3.2 with jeveloper 11.1.1.2.0 with Win 7

Hi everyone, how must I configurate weblogic server with jdeveloper 11.1.1.2.0 on Windows 7 x86 ?
I installed jdeveloper 11.1.1.2.0 with weblogic server 10.3.2 that comes in jdevstudio 11.1.1.2.0.
JDeveloper works but when I am going to test any web application weblogic doesn´t work and the
service never starts up.
I have the next message:
the system cannnot found the specified path
Process Exited
I have to set up any environment varialbes or I need any plugging.

Hi,
is there any more information than this ? Which path is it that the system cannot find ? Can you try installing JDeveloper into a directory that does not contain blanks ?
Frank

Similar Messages

  • HT201365 I just downloaded IOS 7. In my old software if I wanted to get to spotlight to find something I just scrolled from left to right from my home screen. That doesn't work now...so how the heck to I get to spotlight with this new system???

    I just upgraded to IOS 7. Prior to that upgrade if I wanted to get to spotlight search I just scrolled left to right from my home page and got it. Now...that doesn't work. How do I get to spotlight/search with IOS 7? Sheesh...why change such an easy basic thing anyway??? Can someone let me know please.

    Now, you get to Spotlight by swiping down from the home screen, but do not start the swipe at the top of the screen.  Start it in the middle somewhere.

  • Setting windows mail as default "Mail To" doesn't work as usual. Opens entire windows mail vs. email new email message with subject and URL inserted

    I have a problem never had B 4. Have installed new Win7 OS many times and imported windows mail. Always when choosing windows mail in FF it worked. Now when doing I get windows mail program opening or if open coming to forefront or screen. Supposed to get a new email message with subject and URL inserted. I have searched many answers fro FF & MS. I have set WinMail as default, add ed same in reg, etc. etc. Still NADA. Any ideas? thanks

    You should post here:
    Microsoft Office forums >
    Word IT Pro Discussions
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • OWA doesn't work on all servers! "Use the following link to open this mailbox with optimal performance:"

    Hi All,
    I am having a problem with OWA. I have 3  2007 exchange servers on 3 different sites on the same AD Forest. My emails work fine internally and externally with outlook. I have setup Outlook Anywhere on Server No1 with external email address:
    https://mail.company.com/owa
    Everybody can login fine.
    I have setup OWA on the other 2 servers with the same address, but when a user from that site tries to login gets the following message:
    "Use the following link to open this mailbox with optimal performance:"
    So the can't see their emails!
    Please help me out as I am trying to solve it for days now and I can't find out what is wrong! 
    Thank you All!
    Akitan

    Hi Akitan,
    From your description, CAS server 1 is exposed to the Internet. Other two non-Internet-facing Active Directory sites rely on the Internet-facing Client Access server 1 to proxy all pertinent requests from external clients. If I have misunderstood your concern,
    please let me know.
    In your case, I recommend you ensure that Integrated Windows authentication for OWA virtual directory is enabled.
    What's more, here is a helpful thread for your reference.
    CAS Proxy between sites of OWA /Exchange Virtual directory
    http://social.technet.microsoft.com/Forums/exchange/en-US/895a304f-8fb1-4909-8b48-480a7303afd4/cas-proxy-between-sites-of-owa-exchange-virtual-directory?forum=exchangesvrclientslegacy
    Besides, if your issue is urgent, you can connect Microsoft Support. For your convenience:
    https://support.microsoft.com/?ln=en-us&wa=wsignin1.0
    Anyway, if you still want to solve your issue on the forum, I will continue to help you.
    If you need further assistance, please feel free to let me know.
    Best regards,
    Amy
    Amy Wang
    TechNet Community Support

  • I tried to reset my phone, but now all it doesn't work. I plugged it up but all it does is sit there with a scroller.

    I tried to reset my phone but it didnt work. I plugged it in but it doesnt do anything it just sits there with a scroller on the screen.

    Try this:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work

    Help! I have had my iMac G5 fitted with new Logic Board but it doesn't work
    I have just had my iMac G5 First Gen 1.8Ghz fitted with a new Logic Board under the Apple Repair Extension Programme for iMacs.
    I got the iMac home from the repairers and switched it on and everything was working fine for about 2 hours and then all of a sudden the Error Page came up on the Screen (with a big On/Off Switch Logo) and it said I had to shut down.
    So I shut it down waited a few minutes and then tried to re-boot it but nothing happened. All that happended was the Power Light in the Right hand corner came on..but nothing else....
    Help! Any ideas what to do please?

    If you have an external firewire drive (it has to be firewire, USB won't boot on a Rev A), plug it in to the firewire port and turn it on, then boot your iMac and see if it shows on the screen.
    Have you tried to hit the eject (up arrow, the last button on the top row of the keyboard) button when you boot, perhaps the repairers left a disc in the drive? Then try and put your install disc in.
    Miriam

  • Ethernet card doesn't work with new arch install?

    Hi guys,
    so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
    After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part)  and i used that when i cold/rebooted.
    But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
    I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e).  I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now  lspci -vnn | grep -i -A 10 net reports
    00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
    Subsystem: Dell Device 0238
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
    Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
    I/0 ports at ff00 [size=32]
    Capabilities: [c8] Power Management version 2
    Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [e0] Vendor Specific Information: Len=06 <?>
    Kernel driver in use: e1000e
    Kernel modules: e1000e
    ip a reports:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
    4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
    inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
    valid_lft forever preferred_lft forever
    inet6 fe80::6666:b3ff:fe16:9210/64 scope link
    valid_lft forever preferred_lft forever
    lsmod | grep e1000e
    e1000e 215644 0
    ptp 17692 1 e1000e
    any help on what to do next would be greatly appreciated.
    Last edited by mvheart/dev/null (2014-08-18 04:02:12)

    Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
    [aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
    [sudo] password for aaron:
    Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
    [aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
    ● [email protected] - dhcpcd on enp0s25
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
    Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
    Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
    Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
    Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
    Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
    Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
    Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
    Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
    Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
    Last edited by mvheart/dev/null (2014-08-18 15:50:10)

  • My pages are not working on Mountain Lion. I reinstalled iWork from the CD updated it  to 9.3 restarted computer and it still doesn't work. What else I can do? Heeelp!

    The Pages stop working on my computer when I upgraded OS to Mountain Lion. I reinstalled iWork from CD and updated to 9.3 version from Apple store. I also restarted computer before opening the iWork. It still doesn't work. It keeps giving me the error page. The same thing with Numbers. Only Keynotes opens.  What else can I do? Heeelp please! 

    We are not omniscient. Use screencapture on the error page. Shift + Command + 4 … then drag the cross-hairs around the error, and release. The Screen Shot will be written to your Desktop. Use the camera icon in this editor’s tool bar to embed that Screen Shot of your error in a follow-up post here.
    Did you move the Pages and Numbers applications out of /Application/iWork ’09 folder, where they are expected to reside? Did you run /Applications/Utilities/Disk Utility.app, and on your boot drive, verify/repair permissions?

  • TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
    tt2

  • HT201304 I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    I purchased a photo shop product called camera forge for $5.49 and is doesn't work. How do I get a refund? Thanks Fiona

    Take it up with the app developer first. If they won't respond then you can take it up with iTunes support.
    http://www.apple.com/support/itunes/contact/

  • I have wifi access but youtube still doesn't work. how do i fix it?

    I have wifi access but youtube still doesn't work. how do i fix it? it keeps saying it cannot connect with youtube

    What country are you in?  Is YouTube legal there?

  • Compositing in KDE sometimes doesn't work on Nvidia hardware

    I tried searching whether similar issue was already discussed on the forums, but didn't find anything; sorry if I missed it.
    I have two different systems with Nvidia hardware, one with a 9500M GS, and another one with a GTX 580. After updating to KDE 4.11 (as far as I remember, this issue started appearing at about that time; now it still happens with KDE 4.12) compositing in KDE sometimes doesn't work. By "sometimes" I mean that once in a while I boot the computer and compositing isn't working, then I reboot and everything is fine. Sometimes hitting Alt+Shift+F12 twice helps, but sometimes it doesn't. I didn't gather statistics, but it seems to happen on the 9500M GS system more often than on the GTX580 one. On the former it happens once in about three boots, while on the latter it's something like once per ten boots, but I may be wrong.
    I use proprietary driver, since I sometimes use the computer for gaming, and the opensource driver is still not quite up to the task. Btw, games work fine even when compositing doesn't work.
    I haven't noticed any similar issue on my other machine with Intel graphics.
    If anyone could help in identifying the cause, I would be much obliged, because I have no idea where to start searching.

    Good guess but even if I miss the word or any text, in normal use it still brings up the menu (with options limited to 'zoom in' and 'zoom out'). When I'm not getting the menu for word correction I'm not getting any menu in the body of the document at all - it's strange!

  • Submitting a pdf in acrobat 9 (vista) send button doesn't work

    I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

    I have created a form in livecycle designer with either "submit by email" (sends xml file) or a submit button with a pdf chosen as submit type. The form works fine in acrobat 9 but when I click on either button and it opens my email client (outlook in windows vista), the "send" button doesn't work. Any ideas?

  • Me account in iCloud doesn't work anymore?

    Hi,
    My "me" account in mail doesn't work anymore (icloud). I received this message:
    There may be a problem with the mail server or network. Verify the settings for account “iCloud” or try again.
    The server returned the error: The connection to host p04-imap.mail.me.com on port 993 failed.
    What to do? Can't receive any emails?
    Thank for your advice and help

    I'm having the same problem.  I can't log in from ANY device, and they are all apple products.  I've even tried to call customer service, but the call keeps getting dumped.

  • Maintain Audio Pitch Doesn't work

    Hi,
    My Maintain audio pitch doesn't work (prem CS5 5.0.3 + Mac pro).
    A basic speed change with audio works fine but not with MAP selected.
    Anyone else know about this issue?

    I'm looking at possibly buying Premiere and this feature is very important to me.  Was this problem ever corrected?

Maybe you are looking for