IT efficiency can be improved with automated cloning

It is well known that creating clones manually is labor intensive process. But with the assistance of Solix's product we've been creating automated clones where clones are created and configured faster and with fewer errors. Solix also provides products and solutions for [data archiving| http://www.solix.com/enterprise_data_archiving.htm ] , etc.

Of course not ... it is spam ... and everyone that reads this should cross this vendor off their list and refuse to purchase their product as they are spammers.
In the future please click the "Report Abuse" icon and report spammers so their trash can be removed and their accounts closed.
Thanks.

Similar Messages

Can anyone help with Automator/Scripts with Mail Items

I have a set up a smart folder in mail and it shows about 100 emails. These vary in content, addresses and recipients. The emails also have an extended threads.
I need to generate a report with the emails (including threads) by subject time, date. etc.
It will need to analyse the From: To: Date: Time: Subject: for each of the top email and also (all the threads within each email).
How could Automator be scripted to do such a task. Manually it will be very time consuming and difficult.
1. I am a newbee to automator and scripting is this likely to be beyond me?
2. Are there any good sources of scripts available on the web which could be adapted?
3. What is the recommended reading for writing, applying and using Scripting?
iMac G5 Mac OS X (10.4.6) Airport Extreme; PalmT5
iMac G5 Mac OS X (10.4.6) Airport Extreme; PalmT5

Thank you for taking the time to reply. I was finally able to figue out what to do. So far today everything is fine.
Most Sincerely,
Glenda

Tell SAP what can be improved with Interactive Scripting (maximum points)

Hello,
This is John Burton, product manager from SAP for the Interction Center. I need you help!
SAP is looking to fix any critical issues with the Interactive Script Editor and runtime. If you are using scripting and have issues that you think really need to be addressed, please let us know by replying to this message with your clearly stated requirements
Obviously SAP will not be able to address all requirements. However, we will seriously consider all suggestions and implement those that we feel best address the needs of the SAP customer base while fitting with our available development capacity.
Please respond as soon as possible this week. Thank you.
Regards,
John
P.S. At least 2 points will be awarded for any suggestions. 6 points to the top 2 suggestions and 10 to the best suggestion.

hi, thanks for the feedback request ,
i think i did a lot of investigation on ISE than anyother,
i have couple of request to change in the editor,
1) JAVA versions, java vesrsions always effects the editor configuration and scripts, which we need to be removed this risk ,
to fix this issue, we need to investigate number of hours , whether the error coming from J2EE enginee or the java vesrion in local machine ,
rather doing all this, we must have a faculity to develop interactive script in SPRO like survey suite,
so that we can reduce the risk of this java errors J2ee enginee dependencies, number of consultant investigation hours, ands alot of money
then in that case we dont need scripting editor,
if we can run a survey sute script in webclient , why cant we designed the scripts and run successfully in webclient ,
we can remove 100 % risk and save millions of money ,
regards
sreelatha
SAP CRM functional consultant

Can you help with automator & disk utility?

I'm trying to set up an automated "permissions repair" to run every night. I set up a workflow using automator and saved it as an iCal item. If I double-click on the resulting .app, or run from Automator, the workflow works as I expected, but all I find in the morning is an open Disk Utility with no repair performed & no error messages. Examining the log file confirms that nothing happened except the launch.
Here's what the wf does: Launch Application-Disk Utility, Watch Me Do-Click in the text "Macintosh HD" Click the "Repair DIsk Permissions" button, Pause-for 10 seconds, Play QuicKeys Shortcut-(types admin username, tab, admin password, enter).
Like I said, works just fine except when iCal runs it. What am I doing wrong?

..."I'm trying to set up an automated "permissions repair" to run every night."...
As others have mentioned, it shouldn't be necessary to "repair permissions" every night.
And if you are an administrator in charge computers used in a shared environment (eg. schools, libraries, a shared machine in a work place, etc.), I would go further and say that "repair permissions" should definitely not be run at all without verifying them first to make sure everything checks out, and certainly should not be automated unless some sort of verification routine is included.
With Leopard's version of "repair permissions", failure to exercise sufficient caution could allow even "standard" users to gain "root" level privileges.

Changing creation or modification date with Automator

Three computers access iTunes in my apartment. The files are located on a drive connect to an airport extreme base station. Each computer needs to import music and have physical access to it for iPods and playlist creation. Since iTunes does not automatically check for new files I am in the process of building an Automator script to fix the problem.
I have created an Automator action that allows the user to control-click a folder with audio files in it and have Automator manually change the file name, then import the files into iTunes. My hope was that this would change each files modification date so that, at a later time, another Automator action could search the network drive for newly added media via the modification date. My problem is that simply changing the name does not change the modification date. Even creating an archive and unzipping it before importing does not change the date.
What action can I do with Automator that will change the modification date on those files so that I can search for them later? I know I can add the date to the file name but I don't want a user to have to guess which dates files were added (i.e. I'd have to tell Automator "look for this specific date in the file name' which is obviously unhelpful if I don't know the specific date).
Long story short, how can I change either dates with Automator?

Create a column with the following.
TIMESTAMPDIFF( SQL_TSI_day, Opportunity."Created Date" , CURRENT_TIMESTAMP )
add a filter on this column, for example, <=90.
the SQL_TSI_month does not return accurate number of months.
Cheers!
Shilei

How can I introduce text in a web page with automator?

I want to create a workflow with automator for httpS web pages in which I have to introduce the user and password. how can I do?

Try this:
set the clipboard to item 1 of (get name of (static text of group 104 of UI element 1 of scroll area 1 of group 4 of window "Account Summary" of application process "Safari"))
(10906)

Hello there, there is a rare window that keeps popping up every time i start Logic. I'd like to send a screenshot... anyway, it's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

hello there, there is a rare window that keeps popping up every time i start Logic. It's a "tempo" window with strange layout about midi effects and so,.... is it normal? How can i improve this? Thanks.

Hmm, that's some sort of MIDI Arpeggiator setup in your environment. Strange that you don't know it, this has to be custom-installed, it is not part of the standard setup.
You can do two things about it:
1.unlock your current screenset (shift-L), then close the (Bass Driver) window, then relock the screenset (shift-L). Next time you open up this project you won't see the Bass Driver, but it is still in the project.
2. You can remove the whole page: open the Environment (cmd-8), then go to the dropdown menu arrow top left of the Environment window and select the Bass Driver layer. If it is selected, dropdown again and choose Delete. Now Save your project under a different name (Save As...), so that you still keep the Bass Driver setup in the original project. If you don't need to keep it, you can simply Save.

How can I download images from website with Automator?

Hi!
I want to ask how can I download images from website with Automator like here http://www.youtube.com/watch?v=hQm7Xr9jY0w&t=85m15s (in 1:25:15).
I want to download these images to my downloads folder. Some things have changed and I can't find exact options as then. When I am trying to make it it shows "The action "Download URLs" was not supplied with the required data."
I am using 2012 late iMac with Mac OSX 9.2 (Mavericks).

There are two apps that I know of - and I would also swear that they come from the same developer, although they've different names. Both have free trials and both cost $40 (but both do 'other' video conversion as well).
One is WonderShare - I bought this one and it works very well for downloading YouTube videos as well as converting just about any file format you can think of.
The other is iSkysoft Video Converter (just noticed that it's now $36).
I tried them both and finally decided on WonderShare. Give them both a trial run and decide if you like either one enough to buy it. I don't know of any 'free' software that will allow you to download and convert YouTube videos, but perhaps someone else will come along and know of something...
Good luck,
Clinton

Iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

Hi there skmonirul,
Welcome to Apple Support Communities.
From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If the issue persists, try restoring your iPhone as shown in the article below.
Use iTunes to restore your iOS device to factory settings - Apple Support
So long,
-Jason

Photo has packet loss. Can I improve the image with Aperature?

I received a poor quality family photo (hard copy). Almost like "packet loss" on TV whereby the image edges are muted and/or missing. I wanted to enlarge the 3 X 5 inch photo but if the quality is poor at this resolution, I know enlarging will just make it worse.
Can Aperature improve the photo quality? Compression or rendering or ??
OR is this a photoshop opportunity?
Please advise.
Thanks

Hi labratinaz;
While I will admit I am now learning to use Aperture, IMHO this sounds like if it can be solve it will take Photoshop to do it. I don't think the adjustments in Aperture are powerful enough.
Allan

Can't work with Macbook mini-dvi adapter to s-video out under Windows..??

hi..
My macbook can work well with mini-dvi adapter to tv out under mac os,but it can't work under windows os..
If anyone's using their Macbook and has any comments please let me know..
Thanks.
Richard

Yes, if you can get an s-video cable and plug that into the SCART adapter, that would be better than plugging in composite video.
Clearly, having an SCART connection is not going to "improve" the video going in, you're going to be limited by the lowest quality connection. An s-video connection will provide a higher (but probably not a lot) quality signal than composite video.
-Doug

Why can't I get Automator to open multiple files at once?

I'm trying to do something relatively simple with Automator: I want it to open (in Photoshop) all RAW files within a certain folder. Here is what I have:
1. Get folder contents
2. Filter Finder items: Name Extension Contains "RAW"
3. Open Finder items: Open with Adobe Photoshop
When I save this as a Finder plug-in and apply it to a folder, it only opens the first RAW image in PS. It is possible to open multiple RAW images at once in Photoshop, so that's not the problem. Somehow I can't tell get Automator to open ALL the RAW images in the folder, not just the first one. I've tried substituting "Find Finder Items" for "Filter Finder Items" but the result is the same.
What am I missing? A million thanks to anyone who can give me a solution!

If your using PSCS2 I assume you also have Adobe Bridge.
The best I can come up with is a workflow that filters RAW files out of a mixed file folder into their own folder, then opens that folder in Bridge, from where, with a command-a (to select all) and command-o (to open), you get all of your RAW files up in the RAW converter.
1. Get Specified Finder Items (Make this source folder)
2. Get folder contents
3. Filter finder items
4. New Folder (Target for filtered results)
5. Open finder items (Open with Bridge)
I've tried adding an Open with Photoshop as a last step and for some reason it bypasses the RAW converter and pops them straight into PS.
IMHO, it's just as easy to use the Adobe Bridge, and open the files you want direct from there.

How can I sync with audio framerate?

I hope that there is an entirely different way of doing what I'm trying to do because I've run up against what seems like an insurmountable obstacle. I have been working on a project for many months and the last piece to figure out is synchronizing application actions with the audio framerate. I have seen other apps doing this successfully (but proabably written in C++, not Java) so it can be done with standard Wintel boxes - but I'm now concerned that it cannot be done using Java Sound.
My project attempts to animate sound with visual images (not video or pictures but more abstract visualizations based on the audio itself). It works fine when simply "listeing" and responding to the audio. The final step is to be able to sync specific abstract visualizations with precise points in the audio (frames or position in microseconds). I'm now wondering if what I need is handled by the soundcard (hardware) and not available through Java. I presumed that I would be able to rely on the soundcard to handle the realtime audio stream (using its clock) and I would simply wait for increments of a certain frame count that correspond to the refresh/trigger times for my visualizations. As it turns out, after a lot of experimenting with my configuration, I can't find a way to trigger a method in my application synchronized wiht a certain period in the audio being played. I am playing audio by writing to a SourceDataLine, and listening (using loopback, I believe) on a TargetDataLine. To give an idea of what I'm looking for, if a LineListener supported notification based on reaching a certain frame position in the audio stream, that would be great. That doesn't exist (that I could find, only START/STOP/OPEN/CLOSE events). I've been trying to set the buffer size on the TargetDataLine, and the number of bytes (frames) that I read from that TDL, to achieve a synchronization with the actual rate the audio is playing through the sound card. What I've seen is that the number of frames made available through TDL is not consistent. The read() method blocks for various times and with differing incremental frame positions as the TDL buffer is replenished in real time.
My goal is to be able to detect when a number of frames corresponding to 20 milliSeconds at 48kHz or 44.1kHz sample rate have been played through the sound card. Is this possible? I've not posted any code because the code I have isn't non-functional, it's just not capable of performing the task I am trying to achieve. Suggestions as to how I can refine my existing approach, or what other direction/implementation I can pursue will be greatly appreciated.
Edit: typo.

ags wrote:
I think this breaks down into two related but separate issues:
First, the latency between writing audio (to a SDL) and when that audio is actually heard. If I could find a way to measure that, and it was consistent, I could adjust my processing and delivery of audio data to that SDL. As I tried to explain in my previous post, there will ALWAYS be a variability in the time when a given frame is processed in an SDL and when it sounds. Biggest variability is between the time required for the onset of the first sound (played via bytecode interpretation) and onsets of subsequent sounds (if played via code loaded into memory). But JVM switching also accounts for variability.
Have you seen this article?
http://quod.lib.umich.edu/cgi/p/pod/dod-idx?c=icmc;idno=bbp2372.2007.131
"Real Time Low Latency Audio Processing in Java"
It does a good job of listing various factors that affect real-time audio latencies.
The other problem is that even if I were able to get an accurate measurement of the delay (latency) in the audio lines, if I then set system timers to cause action in sync with the audio frame rate based on audio sample rate (frame rate for uncompressed PCM audio) there is still an error path. Again from observation not direct knowledge, it seems that there is no direct link between the sound card clock (controlling real time frame rate and what should really be the master of all actions) and the system clock (which I would use as a surrogate for the actual sound card clock to synchronize my actions with the audio being heard). Even if I were to establish perfect synchronization at the start of a song, by the time 5 or 10 minutes of audio has been processed, I suspect there will be an accumulation of errors between the sound card clock and the system clock that becomes noticeable.The sound card clock and the system clock are perfectly in synch. The problem is the granularity of the system clock. With Microsoft, the clock info is only updated once every 15 msec or so. As a consequence of this, System.currentTimeMillis() will only report the time at the last update. Also, Thread.sleep(millis) and setting a Timer are subject to this constraint. The error doesn't accumulate, though. It is just an issue of having a reduced "granularity" that creates a predictable error. (System.nanoTime will always be more accurate--it is not subject to letting the OS determine the update frequency.)
As I wrote, there is a hack that allows you to increase the granularity of the OS clock interrupt. It involves setting an independant, background thread to sleep for the maximum amount of time, e.g. Thread.sleep(Long.Max_Value). This somehow forces the OS to use a higher granularity, and with Microsoft the accuracy becomes about 1 msec (comparable to Linux and Mac systems). I learned this at the forum Java-Gaming.org.
>
I'm open to ideas, criticism or examples of how I might acheive my goal. While it might not be practical or the only way, the best I can describe what I'm looking for is to have an audio-event driven system where I can determine a frame position corresponding to the audio being rendered in real time and trigger events to keep other actions synchronized with that audio. If a constant delay (latency) was maintained and measureable, that would be OK.
This is a difficult problem.
Agreed about the difficulty!
Given all this, I think the questions are:
1) how much in advance do you know about given frames that you wish to use as cues?
2) how well can you guestimate an anchor point? (and, is there a way to improve upon the guess with feedback?)
3) how accurately can you trigger the visual cue?
Regardless of when Java decides to process a frame, it DOES manage to keep the playback steady. Thus, if you focus your efforts on finding an ANCHOR (for example, the nanoTime, or "close enough" approximation, when the first frame sounds) that you can use as a reference point for the duration of the sound, then you can use that point to calculate conversions between the frame count of the sound and the time it can be expected to play.
For example, if the frame is 44100 and you estimate frame 0 was at time 1336426670003 (System.currentTimeMillis), then set a Timer, in advance, to trigger the visual cue at 1336426671003 (I'm adding 1000 msec). The level of accuracy will remain the same regardless of the frame number and duration involved as long as you use the same anchor (and the sound playback is not interrupted).

How can I improve the stability of itunes64bit 8.0.2 on my Vista system?

Vista Home Premium: iTunes64bit: application crashes after adding album photos and then changing views (list, Album, split) or clicking on different playlists and back to the entire music library.
The library has 42,000 items (mostly music) so it is quite large. At launch it takes a long time for itunes to load and display. There is no user cues telling me it is running. It simply displays after 60 or more seconds.
Then I start working in the library, pasting pictures to multiple items, modifying album titles.
After doing a few management tasks on my music items and navigating back and forth between the music library and playlist (changing views), the application stop being responsive and according to the log, the app just plainly crashes.
Sometimes I can restart successfully but most of the times, I need to stop the itunes service or log-out before I can restart it successfully.
I am using itunes64bit 8.0.2
I am running it on a machine equipped with 4GB of ram and the library lives on a 500GB external hard drive plugged-in through USB 2.0.
How can I improve the stability of itunes64bit on my system?
Message was edited by: JF Boisvert

This VI can be convert to labview 8.0 because subvi are not compatible with old version.
I post a screenshot.
Aurélien J.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Du 30 juin au 25 août, embarquez pour 2 mois de vidéo-t'chat ! Prenez place pour un voyage au coe...
Attachments:
image.jpg ‏38 KB

How can I improve Wifi reception of MacBook Pro?

I have just bought an external display to use with my MacBook Air and MacBook Pro (17") on the second floor of my house. My modem/router is on the first floor on the opposite end of the house, no more than 55 ft. away.
My MacBook Air gets a strong full Wifi signal (all 5 bars are showing)—so strong that I can easily stream Netflix movies without interruption, but my MacBook Pro gets one so weak (only 2 bars are showing) that I can hardly surf to any webpage at all. And this occurs even though both computers are in exactly the same location.
I have AT&T U-Verse, which uses a model 3801HGV modem/router. No computers in my house are connected via ethernet; all through wireless.
My question: What can I do to improve my MacBook Pro's signal strength? Relocating the modem/router is not an option. Do I need to boost my router's signal somehow? If so, how? Or can I improve the reception of my MacBook Pro?
I do have an idle AirportExtreme that could be used in a solution, but I am not sure whether, or how, I could use it.
Thanks in advance for any thoughts.

55 ft is quite some distance, especially if you are runng 5 GHz.
Maybe it is dual band. 2.4GHz is more for distance even if a bit slower.
Adding a second router is a great idea. Just plug it in
open your airport utility. Automatic set up.
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US

IT efficiency can be improved with automated cloning

Similar Messages

Maybe you are looking for