It has a folder with a question mark. Did I break it?
I accidentally bumped into my Macbook a few days ago and it fell...I thought it was fine until later I tried to turn it on and, to my dismay, it has a blank screen with the exception of a folder with a question mark on it.
Is it an invalid now? What do I do?
Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the above doesn't help, but otherwise shows the drive is OK, then you need not replace the drive. However, you will need to reinstall OS X. You may do that without erasing the drive:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
Now, if the drive is toast but still mounts you may be able to recover some of your personal data before replacing the drive:
Basics of File Recovery
Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. If you stop using the drive it's possible to recover deleted files that have not been overwritten by using data recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.
Similar Messages
-
Laptop turns on but has a folder with a question mark in the middle
for the last month or so my computer has been acting weird. when i turnd it on one morning it wouldent load it just kept the apple sign logo on the screen then it would change too the circle with a line though it sign.
now the logo doesnt even show up and a folder with a question mark on it is shown. is there a way to fix this problum and if so estimated how much...Hi wizy;
It sounds like either your disk or the directories on your disk have been slowly going bad.
Do you have a backup?
The question mark indicates that your Mac is not able to find a system to boot from. I would suggest that you boot form the install media for your Mac and repair the disk with Disk Utility. Let us know the results of that and we can go from there.
Allan -
HT1338 My computer screen is grey and has a folder with a question mark on it
If was just grey with apple then got it to safe start loads the bar then it shuts off what now
A folder with a question mark at boot means the startup drive can't be found. It may be damaged or even dead as a doornail.
Hold down the command and r keys at boot and use the Disk Utility app to see if it can be repaired. -
Macbook has the folder with flashing question mark
Yesterday as I was watching Netflix my Mac froze. I was skipping around an episode and then started opening a folder to do something else while it loaded and then it just froze. I thought maybe I was clicking on too many things at once or whatever and it got screwed up a bit so I closed it for a minute or two. When I opened it back up it had a (light) blue screen that wouldn't go away so I shut it down with the power button. Then when I turned it back it just had a white/gray screen for like a minute before the folder with the flashing question marked appeared.
I've googled possible solutions but nothing seems to work. It won't boot up in safemode. One answer suggested trying to do comm-opt-P-R (can't remember what that was trying to do) and that didn't work. The screen would just go black and then start up over and over. When I just press the opt-key it takes me straight to Internet recovery. However, none of the options available work. I don't have the TimeMachine thing, I don't have a disk to reload the Lion software, and there's nothing to click on at all in the disk utility. All that's available in that is a disk0 and the Mac OS X Base System and I can't click on First Aid/Erase/Partition/Restore. I've opened up the startup disk and there's nothing that shows up.
Is there something else I can try at home or should I just go ahead to the apple store? My Mac is under a year old still, but I spilled soda on it back in like October and had to get all the parts replaced so I don't know if that would do anything to the warranty....And if something does have to get replaced will I lose all my stuff? It was bad enough losing four months worth of data, I don't want to lose seven.
Thanks for any help.As long as the parts were replaced by someone authorized to do the repairs, you should still be fine. This error indicates that they computer isn't able to find a disk to boot to.
The "disk" to reload Lion is that internet recovery (also can be launched from command + r).
Seeing as how you don't have the startupdisk in Disk Utility, I would recommend getting it into a store to see why that drive isn't detected. It could be something as simple as a loose SATA cable, or as catastrophic as complete hard drive failure. While you're at the store, I'd look into investing in an external drive to start running Time Machine... -
does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?
Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718 -
My screen has gone blank on startup and occasionally a grey folder with a question mark appears. I have tried rebooting either by pressing the start up with power or pram.. Neither attempts have worked ! My iMac is 2008. Please help :)
Hey Carolinearnold!
I have an article for you that seems to address this issue and can provide some troubleshooting steps for you:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I installed a Barracuda 500 gb drive. When I attempted a reinstall based off an external hard drive using time machine, it showed an error message of not being able to complete the back up. This was after I formatted the new drive using disc utility. I reformatted a different external drive and let it make several back ups. I then put the new drive into the machine and now I only get the folder with the question mark. It is a late 2009 iMac. The OS updates have been through the on line store and I do not have back up discs. Everything SHOULD be backed up on my external.
when you partition and format the new bare drive are you running off of an install disc in the optical drive? I have used the install disk for Leopard to access the Disc Utility (did not install Leapard, just used it to access the Disc Utility) as well as the machine prompting me to take action due to the new hard drive being recognized, again using disc utility and using the install disc provided by the hard drive manufacturer. All of these were done according to instruction as previously mentioned, on a reformatted and partitioned drive each time.
What OS version are you nstalling on the bare drive before you attempt to restore from your Time Machine backup? I have not installed any OS on the bare drive. I do not have a copy of Lion 10.7.5 as I purchased it through the app store. I was under the impression I could reinstall all the data through Time Machine but that is proving elusive - frustrating.
Are you trying to use the Time Machine "star wars" interface to restore or are you using Migration Assistant? I am not using migration assistant. I have been using the Time Machine restore application. -
My iMac is completely unresponsive. Whenever I restart it, it's just a white screen with a flashing file folder with a question mark in the middle. What does this mean?
this means the mac cannot find the startup disc. which more times than not means you need a hdd replacement.
try starting holding the option key, then using utilities try to repair the disc. -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
What does the icon of a folder with a question mark inside mean?
After an overnight power outage I tried to turn on my iMac this morning, but all I got was clicking sounds and a gray full screen with the icon of a folder with a question mark inside it, blinking. (There's no tool bar that appears anywhere). What does that mean?
I've tried unplugging the system and waiting a while before attempting another boot. Same screen.
I recently (a month ago) upgraded to Snow Leopard from my original OS X software. Never had this sort of a problem before.The iMac was purchased around 2005 or 2006. Intel Dual Core processor.
Thanks for any help on this.Thanks, Paul, for the prompt reply.Obviously, your answer isn't what I wanted to hear, but feared. When I get home tonight I'll try finding the install disk and booting from that. Fortunately, I still have a MacBook Pro that is running fine. Incidentally, I have a Western Digital external Hard Drive that has very little, if anything on it. But since I can't open anything on the iMac, I guess I'll have to see if the install disk works before I try to figure out IF I can use that WD-External drive temporarily rather than replace the HD on the iMac. Any clues on what a replacement drive and labor runs for that sort of iMac repair?
j -
I have a folder with a question mark and I hear the drive running I think my drive crashed
I have an imac intel duel core I run OSX 6.8 lately the gear has been hanging up a lot I keep haveing to shut down and force quit and reboot. yesterday a folder with a question mark showed up. today nothing shows up but I can hear the hard drive. I booted up the os dvd for SL and it wont see the hard drive. only the dvd player and idisk (which I can't use anymore ) I have disconnected my external storages. I am now on my mac airbook chatting to you.
Do you have any suggestions as to what to do?Probably a crashed HD. Please carefully read Apple's Flashing question mark appears when you start your Mac article for trouble shooting steps. As long as you have been backing up the system it's minor inconvenience of replacing the Internal HD and restoring from your backup. If you haven't been backing up then you are about to learn why backing up it's optional it's critical.
-
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation. -
Can't seem to get my mac book to boot from the CD after installing new hard drive.
I keep holding down "c" while restarting the machine with the disk in but it just keeps ejecting the disk and giving me a folder with a question mark.If your on 10.5 with a Intel Mac, I think Apple has jinxed the firmware so you can't boot from the 10.5 disk anymore.
So far several people, myself included, can't boot from a 10.5 OS X disk on a Intel Mac.
Your going to have to buy a 10.6.3 Snow Leopard retail disk, it's wayyy better than 10.5 anyway, faster and most stable even better than Lion. Have to buy iLife though as it doesn't come on the 10.6.3 retail disks, only free with grey disks.
http://store.apple.com/us/product/MC573Z/A
https://discussions.apple.com/message/16276201#16276201 -
when i starst my mac i get a flashing folder with a question mark. i tried rebooting and holding the option button then i get 2 boxes, one with a refresh arrow and one with a forward arrow neither of them seem to do anything. now what
Here is an article that describes what it is supposed to do:
Startup Manager: How to select a startup volume
If no Volumes are shown, it is telling you there are no potentailly bootable Volumes attached. That means your boot drive has died or the bootable image on it is unrecognizable.
What Mac Pro ? by year, GHz, number of processors, screen size?
What Mac OS X ? -
What does it mean when I start my computer and there is a file folder with a question mark?
What does it mean if I start my computer and there is a file folder with a question mark blinking?
That Disk 1/ Mac OS is the install DVD not the hard drive. Your hard drive is not recognized which would mean it's probably dead.
For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/
Maybe you are looking for
-
Help! My computer locked-up and had to be rebooted. However, when I restarted it and hooked up my iPod, I noticed my existing iTunes library (all 450 GB of it) was GONE and was replaced by a brand new library. Fortunately my old, 450 GB library is
-
Weird Issue : Difference in HTML/excel output and pdf/rtf output--Urgent
Hi There, I am facing a weird issue. I created one rtf template. When I preview the o/p in rtf or pdf, everything comes up as expected. When I preview the same in html or excel, few rows come up as bold though they were not supposed to. What could be
-
IPhoto 9.4.2, photo stream-add subscriber?
Hello I cannot figure out how to create a list of subscribers to share my Photo Stream pics. I succeeded in adding photos and have a Photo Stream icon in the Source panel, which shows my chosen photos, but not what? How do I notify someone or add a s
-
I set a poster frame in the timeline, but the thmbnail in the menu does not update. Why?
I have used poster frames correctly in other projects before, also in encore cs6. In this project, it's not working. haveing had it working before, i'm sure its nothing to do with the OS, or media type, since that was the same in my previous projects
-
i downloaded the adobe digital edition 3.0 to read an ebook from BPP..i'm however unable to navigate the pages of the book using the arrow keys and the pg dn and pg up keys....the page on the screen just remains static no matter what i do....any help