It imports name of file

When I take a movie from iMovie and export it to iDVD, it always takes the name of the file and sticks it into the middle of the title screen, whether I want it there or not.
I'm still on my G4 and I know I don't have the best graphics card, but there has to be a way to get rid of this. It's been some months since I've worked on iDVD, but I know even with version 6 I've been able to get rid of it in the past.
Can somebody help me before I tear my hair out?
Thanks!
susan

Hello Susan,
When I take a movie from iMovie and export it to iDVD, it always takes the name of the file and sticks it into the middle of the title screen, whether I want it there or not.
That's perfectly normal. iDVD doesn't know how you would like to name your buttons, so it simply assigns the name of your iMovie project.
You can change the text by clicking it two times (not dbl-click), then typing the text you want (e.g. play movie etc.)
hope this helps
mish

Similar Messages

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing!

I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!

Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2

Prores files not recognized... most of the time [message -- file '[file name].mov' cannot be imported – this 'MooV' file is damaged or unsupported.]

Running AE CC 13.2 on iMac with Yosemite 10.10.2
I just started getting an error message when trying to import any number of ProRes 422 (HQ) files.
file ‘[file name].mov’ cannot be imported – this ‘MooV’ file is damaged or unsupported.
This happens approximately 90% of the time. There have been occasions where I can open and view files of this type.
I have gone through the various troubleshooting options here:
http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html
I reinstalled ProApps to no avail.
Permissions are fine.
Creative Cloud recently updated AE over the past few days. Perhaps this incremental update fouled something up? Last weekend, things worked perfectly fine.
I have also noticed that it takes a lot longer to load AE (since using last weekend). I have used Time Machine to roll the application back to last week's version to see if that helps.
Any insight is appreciated.

The update last week was just to Adobe Camera RAW and not really AE. It would be unlikely to cause the issues you describe. Have you tried turning your Mac all the way off and then back on again?

How to import songs by file name (not by song name)

Hi
I've got many files with different names yet they all have same song name (the website precisely!!!). When I import them into iTunes, all of them appear with same song name (such as www.apple.com). Is there anyway I can import them by file name as song name???
Thanks

iTunes uses the id3 tags, not the file name to determine the information that is displayed. There is no way that I know of to change this. Are you saying the songs have the same title, artist name, and album name but they're different songs?
Check out Doug's Scripts. There may be something useful there.
http://dougscripts.com/itunes/index.php

After Effects error: file 'file name.mov' cannot be imported - this 'MooV file is damaged or unsupported

i have the same problem with this: After Effects error: file 'file name.mov' cannot be imported - this 'MooV file is damaged or unsupported.
But really dont know much of after effects so the first thing what are third-party components?

Begin by giving us more information. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
Be sure to tell us where the .mov file came from and what codec it uses.

What has gone wrong? whilst moving originals to external hard drive it has renamed my files to my latest import name

what has gone wrong? whilst moving originals (to make them referanced files) to external hard drive, drobo 5s, it has renamed my files to my latest import name. what do I do?

The drop-down settings in the Relocate Originals dialog remain unchanged from one use to the next (they are sticky). My guess is that you left the "Name Format" dropdown in the last (unwanted) position -- one you had set when you relocated Originals and wanted them renamed using the file naming convention you use when importing.
The best you can do is to rename the mis-named files. You cannot undo the renaming that has been done.
This is a design flaw (imho it falls short of a bug). You should let Apple's Aperture team know that the behavior your got was different from what you expected, and was not reversible. Use "Aperture➞Provide Aperture Feedback".

When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

I would like to combine multiple profiles into a new computer. Which are the most important folder or files to migrate?

The user profile in my old computer somehow became corrupted and I can no longer access it to log on. Unfortunately I was not aware of the Firefox sync feature at the time. I used a new profile and had to start from scratch to save new bookmarks and extensions/plugins. I did set up Firefox sync for this new profile. Now I have a brand new computer and desire to migrate the bookmarks to this new computer, including the original bookmarks in the old computer, as well as the bookmarks in the second profile. While I have located the profiles folder for each profile in my old computer (as well as extensions and plugin folders), the content of this folder is daunting. I would like to know which are the minimal folders I should select to migrate and would it be safe to simply copy and paste over the entire folder? Please note that I have also added new bookmarks into my new computer which I would not like erased. I hope these details are not convoluted.

Firefox has two methods of bringing in bookmarks from another Firefox profile:
* Restore a backup (JSON files in the bookmarkbackups folder): this completely replaces what you have, so is not the first step
* Import from an HTML file: this is additive and will create an Imported Bookmarks folder or add them under Unsorted Bookmarks
Restore is best if you tag your bookmarks because the JSON format preserves tags. If tags are not important, then it's easier.
What I suggest is:
(1) Export your current bookmarks to the HTML format; you can reimport these later. See: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]]. Open the file in Firefox (it's a web page) to make sure it looks complete before proceed.
Next, get the bookmarkbackups folders from each of your old profiles that you want to restore, and look for the most-complete-looking JSON files (they will have the most recent dates and largest number of bookmarks indicated in the file name). Proceed from the smallest set to the largest, or oldest to newest; basically, restore the most important one last.
(2) Restore a backup, then export to HTML. This article has the steps for a restore: [[Restore bookmarks from backup or move them to another computer]]. Then export to HTML and check for completeness.
(3) Repeat #2 until you get to the last/most important restore. You don't need to export that one.
(4) Import the HTML files you've made throughout the process.
(5) In the Library dialog, reorganize. Firefox doesn't have a deduplicator, but you might find one or more extensions to do the job on the Add-ons site if you find a lot of overlap.
Make sense?

Importing All the files from a folder at a time

Hi....
Can any body tell me how to import set of files from a folder into IDM.
It is becoming very difficult to import the files one after other....
Waiting for Reply....
Thanks in advance..........

We used an ant script to build an XML file that will contain the files. The script is configured to use the folder structure of our CVS repository.
We'd checkout our XML module and then run the build script and import the resulting init file.
Code to the script is below -- caveat emptor. You'll need to change the folder structure to suit your own environment.
<?xml version="1.0" encoding="UTF-8"?>
<project basedir="." default="all" name="MyInit">
    <target name="init">
        <property location="." name="src.dir"/>
        <property location="." name="dest.dir"/>
        <property name="project.name" value="${ant.project.name}"/>
        <property location="${dest.dir}/MyInit.xml" name="MyInit.output"/>
        <property name="source.configuration" value="${dest.dir}/configuration"/>
        <property name="source.emailTemplate" value="${dest.dir}/emailTemplate"/>
        <property name="source.forms" value="${dest.dir}/forms"/>
        <property name="source.reports" value="${dest.dir}/reports"/>
        <property name="source.resource" value="${dest.dir}/resource"/>
        <property name="source.rules" value="${dest.dir}/rules"/>
        <property name="source.workflow" value="${dest.dir}/workflow"/>
        
        <path id="configuration.path">
            <fileset dir="${source.configuration}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="cp" refid="configuration.path" />
         <path id="emailTemplate.path">
            <fileset dir="${source.emailTemplate}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="ep" refid="emailTemplate.path" />
         <path id="forms.path">
            <fileset dir="${source.forms}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="fp" refid="forms.path" />
        <path id="reports.path">
            <fileset dir="${source.reports}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rptp" refid="reports.path" />
        <path id="resource.path">
            <fileset dir="${source.resource}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rep" refid="resource.path" />
        <path id="rules.path">
            <fileset dir="${source.rules}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rp" refid="rules.path" />
        <path id="workflow.path">
            <fileset dir="${source.workflow}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="wp" refid="workflow.path" />
        
         <path id="source.path">
            <pathelement location="${src.dir}" />
         </path>
         <property name="sp" refid="source.path" />
    </target>
    <target depends="init" name="win_init">
        
        <property name="importfile.path" value="${sp}"/>
    </target>
    <target depends="init" name="make">
    
        <echo file="${MyInit.output}" append="false"><?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Waveset>
${cp}
${ep}
${fp}
${rptp}
${rp}
${wp}
</Waveset>
        </echo>
     
     <replace file="${MyInit.output}"
              token = "${sp}"
              value = "<ImportCommand name='include' file='${importfile.path}" />
     
     <replace file="${MyInit.output}"
              token = "${file.separator}"
              value = "/" />
    <replace file="${MyInit.output}"
              token = "${path.separator}"
              value = "${line.separator}" />
    <replace file="${MyInit.output}"
              token = ".xml"
              value = ".xml'/>" />
    </target>
    <target depends="init,win_init,clean,make" description="Build everything." name="all"/>
    <target depends="init" description="Clean all build products." name="clean">
        <delete file="${MyInit.output}"/>
    </target>
</project>

Multiple drag emails from Mail to a finder window and for it to name the files as the subject heading

Hi
I have been using Mac's now for about 10 years and this is my first problem.
I have recently moved into an office that use PC's with a Windows server.
I have set up the network to transfer files and view the windows server and it works fine.
I have a problem in that my colleagues on PC need to be able to view my emails which I send and receive using Mail. They therefore need to have logical title names and the date sent and ideally who to or from. I view them and archive them using Mail which is fine for me.
I understand about the archiving and copying of mailboxes but this gives every email the un-fathomable title name 9944847 etc.
I can get round the problem by dragging and dropping every email I send and receive individually and it will automatically give it a more logical title of the subject heading however the date is when it was dragged not when sent. This is a pain if I am away or forget to save an email for a day or two and then the date is inconsistent.
Is there a way to batch copy emails from Mail to a finder window and for it to name the files as the subject heading or to archive the files in a similar way so they retain the detailed information my colleagues require.
And no I can not get to all change to Mac and I don't really fancy using Outlook, Entourage or Parallels.
Please help.
Toby

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

How can i import a dmp file.

Hi
i am uzma. i m using oracle 8i. i m facing a big
problem in import/ export utitlity.
Description of my problem
i created 4 users and grant them dba role.
now i want to export only one user named DBC that user is very
important and contains 7 tables and 25,000 records.
when i start exporting user dbc it export all the user eg
system, sysdba, scott, dbc, uzma, other....
and i received this message that export terminated successfully.
but when i import abc.dmp file in another computer i recevied
such type of messages.
* unrecongnized Export file or these obecject are already exsist.
sholud i drop all users except system, scott, dbc
what should i do plz help me in this regard and tell me the
right way to export and import.
with lots of regards
a helpless user

if you run export as a user with DBA privs, you can export only specific users that you need:
Export file: EXPDAT.DMP >
(1)E(ntire database), (2)U(sers), or (3)T(ables): (2)U > U
Export grants (yes/no): yes >
Export table data (yes/no): yes >
Compress extents (yes/no): yes >
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
User to be exported: (RETURN to quit) > scott
User to be exported: (RETURN to quit) >
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SCOTT
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SCOTT
About to export SCOTT's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SCOTT's tables via Conventional Path ...
. . exporting table                          BONUS          0 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table                           DEPT          4 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
. . exporting table                            EMP         14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
. . exporting table                       SALGRADE          5 rows exported
EXP-00091: Exporting questionable statistics.
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully with warnings.
F:\>When you want to import to other database, have that user created already with correct privs, and then do the import:
Import file: EXPDAT.DMP >
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
List contents of import file only (yes/no): no >
Ignore create error due to object existence (yes/no): no >
Import grants (yes/no): yes >
Import table data (yes/no): yes >
Import entire export file (yes/no): no >
Username: scott
Enter table(T) or partition(T:P) names. Null list means all tables for user
Enter table(T) or partition(T:P) name or . if done:
. importing SYS's objects into SYS
. importing SCOTT's objects into SCOTT
. . importing table                        "BONUS"          0 rows imported
. . importing table                         "DEPT"          4 rows imported
. . importing table                          "EMP"         14 rows imported
. . importing table                     "SALGRADE"          5 rows imported
About to enable constraints...
Import terminated successfully without warnings.
F:\>Message was edited by:
Kamal Kishore

Error while importing a .dmp file

Hi Friends,
I have created a DB in Oracle 10g and when i started to import the dump file
C:\>imp sys/pwd@sample file=E:\sample\sample.dmp ignore=y
I get the following error
IMP-00058: ORACLE error 12514 encountered
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
IMP-00000: Import terminated unsuccessfully
someone please correct me

C:\>tnsping sample
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-OCT-2
007 10:08:46
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
E:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = ipaddress)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = sample)))
OK (10 msec)
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-OCT-2007 10:09:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 02-OCT-2007 05:56:11
Uptime 0 days 4 hr. 13 min. 28 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File D:\oracle\ora92\network\admin\listener.ora
Listener Log File D:\oracle\ora92\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=machine name)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=machine name)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "test3" has 2 instance(s).
Instance "test3", status UNKNOWN, has 1 handler(s) for this service...
Instance "test3", status READY, has 1 handler(s) for this service...

Error when Importing a txt file in FDM 11.1.2

Hi,
I'm getting the following error when I try to import a txt file in FDM. I want to load it in HFM
Error: An error occurred importing the file.
Detail: Data access error
** Begin FDM Runtime Error Log Entry [2010-10-18 13:07:03] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fLoadAndProcessFile
Component........................................ upsWObjectsDM
Version.......................................... 1112
Thread........................................... 10836
IDENTIFICATION:
User............................................. admin
Computer Name.................................... M0A1187649-2009
App Name......................................... FDM_ONT
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... orcl
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... OG
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... ACTUAL
Category ID...................................... 13
Period........................................... Mar - 2011
Period ID........................................ 3/31/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

To provide some clarity here, this resolved the issue for use also. The good news is that it should be relatively easy for anyone with FDM Workbench access to resolve this given the following information from the FDM DBA guide (http://docs.oracle.com/cd/E17236_01/epm.1112/fdm_dba.pdf):
To modify the Oracle Work TablespaceName and Oracle Work Table Index
TableSpaceName configuration settings:
1 Launch Workbench, and log on to the FDM application.
2 Select Tools > Configuration Settings.
3 Select Options > Oracle Work TableSpaceName.
4 In Name, enter the name of the tablespace, and click Save.
5 Select Options > Oracle Work Table Index TableSpaceName.
6 In Name, enter the name you entered in step 4, and click Save.
7 Select Options > Oracle Work Table Bitmap Index Switch, and set the value to Off for Oracle 10g and Oracle 11g.
8 Click Save.
9 Click Close.
Step 7 specifically resolves this issue.

A query while importing an XML file into a Database Table

Hi,
I am Creating an ODI Project to import an XML file into a Database Table.With the help of the following link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
I am facing a problem while creating Physical Schema for the XML Source Model.
For the
Schema(Schema)
and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??
or
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)
or
2)my target servers schema
Please tell me what I'll do??
Thanks

and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??This is the schema name which is specified in the XML file .
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)Yes
2)my target servers schema
Please tell me what I'll do??
Thanks

Error while importing the mdl file

Hi All,
I have created the warehouse builder owner repository on linux box,but when i try to create repository user its throwing an error as PRS-00305,could not reserve name due to an internal error.
And when try to import an mdl file also its throwing the same error as above i.e PRS-00305
If any one know the answer pls send me solution.
Thanks,
Krishna

It might also be the MDL file you are trying to import. How was it exported with dependencies, or not? This might be the problem depending on the environment it is exported from and imported into.
Give this a try;
Create a dummy mapping, any will do.
Save your changes.
Export only this mapping and ensure export dependencies is not checked.
Delete the mapping
Save your changes.
Try importing this mapping back in to the same environment share with us the results.
Regards,
Emrah
Edited by: cakire82 on Sep 16, 2009 5:13 AM

It imports name of file

Similar Messages

Maybe you are looking for