It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Hi every
Please help with two questions.
1. - Obi 11g is supported on Windows Server 2012 and SQL Server 2012?
There a compatibility matrix which mention compatibility with versions 2012?
2. - is feasible to install Obi 11g in separate server and install weblogic on another server?
I appreciate the prompt response
Regards
Pedro

Hi Pedro,
As of November 2012 Compatibility Matrix released by Oracle for OBI 11.1.1.x Windows 2012 and SQL Server 2012 were not supported. It was supported on 2008 Windows and SQL Server.
We can have weblogic and OBI server's on 2 different machines. The approach is to opt software only install. the link below will give more details:
http://obieeelegant.blogspot.com/2012/07/obiee111160-software-only-installation.html
Let me know if this helped.
Regards,
Jay

Similar Messages

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

Installing BAM with Biztalk Server 2013 and SQL server 2012

Hello All,
I have to work on BAM with BizTalk Server 2013 and SQL server 2012 , is BAM already comes with BizTalk server installation ?
Will I needs to explicitly install that ? from where I can get the installer for BAM ?
What else I will needs to work on BAM ?
Note : I want to handle Exceptions in BAM ....how to do that ?
Thanks,
Nitin.
Thanks and Regards, Nilesh Thakur.

Hi,
BAM is available with BizTalk, all you need is to select it and install .
Refer the
Installation Guide available on MSDN or follow the blog: http://sandroaspbiztalkblog.wordpress.com/2013/05/05/biztalk-2013-installation-and-configuration-important-considerations-before-set-up-the-server-part-1/
Maheshkumar S Tiwari|User
Page|Blog|BizTalk
Server : Scheduling Orchestration using Trigger Message

How to switch between SQL Server Express and SQL Server Evaluation

I have both SQL Server Express and SQL Server Evaluation installed on my laptop.
I am wondering how to start SQL Server Evaluation; when I click All Programs > SQL Server Management Studio, I always get SQL Server Express (which I installed on my laptop a couple years ago).
I just downloaded SQL Server Evaluation (a couple days ago).
Whenever I try to access SQL Server Evaluation, I always seem to get SQL Server Express.
Sorry if this is a trivial thing; I just can’t seem to get it to work (and I Googled for a solution before posting this).
Thanks everyone!!

Ah! It worked!! This is great!! It seems like I can connect to my version of SQL Server Evaluation, named 'EXCEL-PC\EXCEL'.
Somehow, though, I seem to keep getting errors in my BIDS when I try to run an SSIS project. See below:
Ah! It worked!! This is great!! It seems like I can connect to my version of SQL Server Evaluation, named 'EXCEL-PC\EXCEL'.
I am getting an error that VS is unable to load a document:
BIDS has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation.
To install BIDS, run SQL Server Setup and select Business Intelligence Development Studio.
#1) I recently downloaded and installed SQL Server Evaluation (specifically for the opportunity to try using BIDS and learn about this technology).
#2) When I run BIDS > SSIS, I get the error I described above.
#3) I have had SQL Server Express installed for a couple years on my laptop
So, my question is this: is it possible that BIDS > SSIS is picking up my SQL Server Express, instead of SQL Server Evaluation?
If so, how can I get BIDS to point to SQL Server Evaluation?
You can see in the image above that I have my BIDS Data Connections pointing to EXCEL-PC\EXCEL, which is the name of my SQL Server Evaluation.
Is this correct? Why doesn’t this work?
I’ve spent some considerable time on this. I’m close to just uninstalling EVERYTHING pertaining to SLQ Server, and just reinstalling SQL Server Evaluation, but this will take some time, and I don’t necessarily want
to get rid of my SQL Server Express. However, if that’s the only way to get this working, then that’s what I’ll do.
I’d greatly appreciate any insight into this!!

How to add sql server (SQLEXPRESS) AND sql server Agent(SQLEXPRESS) in sql server Configuration Manager

When I had uninstall Sql Server 2008 R2, that time I had uninstalled instances (SQLEXPRESS and MSSQLSERVER) and again installed sql server 2008 r2 setup .
Before uninstalling from control panel >Uninstall program showed two setups
1) Microsoft sql server 2) Microsoft sql server R2 , I uninstalled both.
As i installed SQL R2 again, it is showing only 1 instance ie "Microsoft sql server R2" but the other instance is some how missing -"Microsoft sql server" and
also sql server (SQLEXPRESS) AND sql server Agent(SQLEXPRESS) services from sql server configuration manager are missing
How to retain the missing instance and the above services?
Plz give replay

Hi Tushar,
I need to ask you a question here.
Why you require SQL Express edition on your machine, if there is no need you can safely ignore it and continue using SQL Server 2008 R2 edition.
Express edition can also get installed if you happen to have installed Visual Studio 2010 for instance.
If you need it then you must install SQL Server Express edition, It is a freeware and can be download from Microsoft website.
BR, Shashikant

SMS_SRS_REPORTING_POINT - Error retrieving folders with SCCM 2012 and SQL Server 2008 R2 SP2

Hi:
According to all the Reporting Services logs my Reporting Point was setup correctly. When I try and run any report I see the entries below in the srsrp.log on the SQL Server. The report names show up in the Console but when I right any of the
listed reports I get errors and no report runs.
I am running SQL Server 2008 R2 SP2 on a remote server. SQL is installed on its own server. There is no firewall between the Configuration Manager server and SQL Server.
Thanks.
Mark
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:15:07 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:07 AM
4532 (0x11B4)
SRSRP registry key change notification triggered.
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:15:16 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:16:16 AM
4532 (0x11B4)
(!) Error retrieving folders - [A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance
name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because
connected host has failed to respond.)].   SMS_SRS_REPORTING_POINT
1/25/2013 9:17:40 AM    4532 (0x11B4)
No folder configuration information found.
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Next security configuration at [1/25/2013 9:22:42 AM]
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Root Folder exists
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Successfully checked that the SRS web service is healthy on server DBSCCM.LOCAL
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Waiting for changes for 1 minutes
SMS_SRS_REPORTING_POINT 1/25/2013 9:17:40 AM
4532 (0x11B4)
Timed Out...
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services URL from Registry [http://dbsccm/ReportServer/ReportService2005.asmx]
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Reporting Services is running
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Retrieved datasource definition from the server.
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ManagedDesktops_MD1
SMS_SRS_REPORTING_POINT 1/25/2013 9:18:40 AM
4532 (0x11B4)

Hi:
Windows Firewall is off on both systems.
I can ping the Configuration Manager server from the SQL Server by netbios name, ip address and fully qualified domain name.   I can ping the SQL Server from the Configuration Manager server by netbios name, ip address and fully qualified domain
name.
I have uninstalled and installed the Reporting Point Service a couple of times and everything looks fine according to the logs after the install finishes but these errors only appear each time I try and Run a report.
Mark

SBO with Windows SBS 2003 Premium (SQL Server)

Hi!
Sorry for my poor English, I'm french. We have signed for SBO but have a little doubt with our Server OS. We have Windows 2003 Small Business Server Premium (with SQL Server 2000). I don't know exactly the version of SQL (I think Workgroup or Standard).
Can SBO been installed on this OS and SQL please ?
Thank you in advance for your help !
Chris.

Hi Christophe.
I install in Windows 2003 the Standard Edition for Sql server with Service Pack 3.
I don't have any problem with that version.

Spatial/Map visualizations in OBI 11g 1.1.0.5, ONLY sql server DB avialable

Dear all,
Could anyone please provide what are the steps to implement MAP based analysis in OBIEE 11g 1...5 version.
Please NOTE we are having only SQL server database with us. All the links and material i found on net so far provides steps to implement it if Oracle database is available.
but we don't have Oracle database at all.
thanks,
Yogen

yeah..kind of sad......but heard somewhere..once the keys are mapped after temporary use of oracle DB ....it can work from SQL server too...not sure what does that mean....

EAP with Windows 2000 client and IAS server

Several messages on this site point to peole using EAP on a Windows 2000 client and authenticating against an IAS server. I am running an Aironet 350 AP and trying to setup my Windows 2000 clients to use EAP only and authenticate against a Windows 2000 AD forest via IAS. The access point and client are on the latest firmware and drivers (12.0 for AP). I have two basic questions.
1. It is my understanding that by enabling Network-EAP as the only authenticaiton type that users will authenticate and then dynamic WEP keys will be used, greatly reducing the risks of compromised WEP keys while at the same time keeping the data encrypted.
2. Does anyone have a quick HOW-TO or point-by-point list of how to configure the Windows 2000 client to authentication using the Network-EAP method? I am currently running into a situation where no matter what I configure on the client, the IAS server reports and error with "Reason: The authentication type is not supported on this system." I also noticed that the "Authentication-Type" and "EAP-Type" fields shown in the IAS messages in the Windows 2000 Event Viewer log have the value "<undetermined>". Has anyone else run into this?

I'm having a similar problem. I'm trying to do PEAP and it appears that IAS is not handling the request properly. It keeps trying to log the user PEAP-##### in instead of setting up the TLS and then asking for Username, Pass, Domain. The IAS error message I'm getting is:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = APPLY\PEAP-00097CFCD901
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name =
Authentication-Type = EAP
EAP-Type =
Reason-Code = 8
Reason = The specified user does not exist.
So if anybody has the needed settings for Win2k (SP3 and 802.1x patch) IAS it would be much appreciated.
Ben
Note: if I had PEAP-####### as a user in Win2k I get:
User PEAP-00097CFCD901 was denied access.
Fully-Qualified-User-Name = apply.org/Users/PEAP TEST
NAS-IP-Address = 172.16.200.31
NAS-Identifier = AP1
Called-Station-Identifier = 004096570d87
Calling-Station-Identifier = 00097cfcd901
Client-Friendly-Name = WirelessAP
Client-IP-Address = 172.16.200.31
NAS-Port-Type = 19
NAS-Port = 37
Policy-Name = Wireless Policy
Authentication-Type = EAP
EAP-Type =
Reason-Code = 16
Reason = There was an authentication failure because of an unknown user name or a bad password.

SCCM 2012 SP1 with remote WSUS on Server 2012 and SQL Server 2012

I am rebuilding my SCCM 2012 lab on Server 2012 R2 x64 OS now.
I have 1 primary site, remote SQL server 2012, and remote WSUS server.
Is the WSUS console still required on my primary site running server 2012? If so are the below the correct steps to get this working?
Install Console on primary server:
Go to Server Manager à Add Roles and features, Navigate to the features section.
Remote Server Manager tools
>Role Administration Tools
--Select Windows Server Update Services Tools Only
Are there any post hotfixes to install?
Intalling WSUS full version on remote server:
Go to Server Manager à Add Roles and features, Server Roles section.
Windows Server Update Services
Do I need to select this as well on the remote wsus server? >Role Administration Tools -Select Windows Server Update Services Tools Only
Since my SQL server is on a remote server do I select the below only?
Are there any post hotfixes to install?

Hi,
One Part of the question is already answered. The second part is: If you want to use a remote SQL Server you need to select exactly what you selected in your screenshot.
Regards,
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

Windows 8.1 and SQL Server 2012

Let me set the environment..
I recently upgraded from Windows 8 Pro to Windows 8.1. Pro. Before the upgrade I was able to run a application that we use that has a SQL 2012 database connection.
After the upgrade we are now getting this error "[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied."
I have been checking some of the related errors but everything I've tried so far has not resolved the issue. Has anyone else had a similar issue? I think the upgrade may have broke something in the TCP stack.
Keep in mind that WIndows 8, Windows 7 and previous versions are fine and not having an issue.

SSMS = SQL Server
Management Studio, a frontend to manage SQL Server, run queries etc.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Installing Dialog Instances with ECC 6.0 and SQL Server 2005

Hi, I have my ECC 6.0 SAP Server, it is Central Instance, Database instance, all in one. My users are working fine, however we will be adding some new users (15) and we want add a Dialog Instance. Can I add one Dialog instance to my landscape without any changes to my SAP Server ??? ..... My dialog instance will be in a new host.
My hardware SAP Server is: 16 GB RAM, 500 GB RAID 5 for my database, four processors.
What could be my Dialogue Instance hardware?
I have read than I must install with sapinst and select Dialogue Instance and follow instructions. Are there any others considerations?? .....
Do I must install SQL Server in the host Dialog instance ??.
Please if you have some suggestions.
Regards.

Hello Jose,
You can install your dialog instance without doing any change to the existing setup as you have mentioned its on a seprate new host.
Two CPU's and 8GB memory would be fine for your dialog instance.It all depends on your requirement.
Yes you need to install the dialog instance using SAPINST, its kool and sapinst would take care of all.
You need not install any SQL server in the dialog instance host only you need to have a SQL client installed but that would be taken care by SAPINST.
Hope this would clarify your query.
Thanks and Regards,
-Bijesh.

Changing sql server service and sql server agent service startup account in SQL Server hosting SharePoint DB

Hi
i have a sharepoint deployment with one SQL Server (running on VM) hosting the config DB and another SQL Server (Physical Host because VM was running out of space) to host the huge Content DBs. I need to schedule automatic backups of the Content DBs to a
network share. For that i need to run the SQL Server Service with an account having permissions to the share as suggested in https://support.microsoft.com/kb/207187?wa=wsignin1.0
I tried changing the logon as a service account to a domain
account which has permissions to the Network Share and is also in local Administrators group of SQL Server and has "public and sysadmin" roles in SQL Server but that caused an issue. the SharePoint Web Application started showing a White Screen so
I had to revert back to the default accounts i.e. NT Service\SQLSERVERAGENT and NT Service\MSSQLSERVER. I viewed the event logs . These are the types of error i got after changing the logon as a service account to a domain account
1) Information Rights Management (IRM): Retried too many times to initialize IRM client. Cannot retry more. Retried times is:0x5.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5148
Version
15
Level
2
Task
9
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T04:46:04.750899500Z
EventRecordID
176477
Correlation
[ ActivityID]
{8FACE59C-1E17-50D0-7135-25FDB824CDBE}
Execution
[ ProcessID]
6912
[ ThreadID]
8872
Channel
Application
Computer
Security
[ UserID]
S-1-5-21-876248814-3204482948-604612597-111753
EventData
hex0
0x5
2)
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5586
Version
15
Level
2
Task
3
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T07:01:35.843757700Z
EventRecordID
176490
Correlation
[ ActivityID]
{50B4E59C-5E3A-50D0-7135-22AD91909F02}
Execution
[ ProcessID]
6912
[ ThreadID]
5452
Channel
Application
Computer
Security
[ UserID]
S-1-5-17
EventData
int0
0
string1
The target principal name is incorrect. Cannot generate SSPI context.

Hi Aparna,
According to your description, you get the above two errors when scheduling backups of Content DB. Right?
Based on those two error messages, they are related to the service principal name(SPN) for SQL Server service. Please verify the if the SPN is registered successfully. You can view it in ADSI Edit or use command line. Please see:
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
When installing SQL Server, those two services below should be registered:
MSSQLSvc/servername:1433
MSSQLSvc/servername
Please check if those SPNs or duplicated SPNs exist. You can use command to reset SPN or remove duplicated SPN and add new one. See:
Setspn.
We have also met this issue when this SPN is registered under Administrator. Please try to register it under Computer. You can add it in ADSI Edit.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Server 2012 and sql server 2008...

I have both running on the same machine, but the ASP pages running on the IIS reaches out through the network returning to the source machine to touch the database.
I cant remember how to set the IIS to reach the database on the same machine.....
Any ideas guys?

In addition to previous responses you can configure the connection string in your application instead of the user that execute the application (which is what Lydia's solution is doing). In this case you can check this list of connection string and find the
one that fit your need
https://www.connectionstrings.com/sql-server-2008/
https://www.connectionstrings.com/sql-server-2012/
Using this option you can use any existing user that already have the right permissions in order to connect to the database.
* This is not recommendation to use this option on any other option, but another option that you should think about. This option have several great advantages but same with the option to control throw the user that execute the application.
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Weblogic server10.3.3 (Oracle Weblogic Server 11gR1) and sql server 2008db

Is SQL Server 2008 db supported for use with weblogic server 10.3.3
we use connection pools and XA and weblogic bundled drivers
we are planning an upgrade from 9.2mp3 to 10.3.3 weblogic server
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs103/103_over/supported_db.html#1179245
seems to indicate that only sqlserver 2005 is supported
Is there a more current version of the suported configurations that I am missing ?
Appreciate any feedback on this
Thanks
Best
Yeshwant

contact support for official policy. Technically, the drivers do support the DBMS version.
If you use any higher API than JDBC, there might be a question as to whether a
particulare API was certified with the latter DBMS version, but unless the DBMS
changed so it behaved differently than the previous for the same activity, then
there should be no problem....

It is compatible Obi 11g with Windows Server 2012 and Sql Server 2012?

Similar Messages

Maybe you are looking for