It is possible to assign the hierarchy of 0CUST_SALES to 0CUSTOMER

Hi we have a a hierarchy in our R/3 system which loads to 0CUST_SALES in our BW system. I have seen a post on here that It is possible to assign the hierarchy of 0CUST_SALES to 0CUSTOMER?
can some one tell me how please.

If you enter to see the infoobject 0CUST_SALES can see that the principal infoobject is referenced is 0Customer and in addition the 0CUST_SALES infoobject dont stores data is only a virtual view of the real object 0customer...the hierarchies of 0cust_sales really is part of 0CUSTOMER...
regards

Similar Messages

Is it possible to assign resources like PC,Printer,Phone etc in resource mg

Hi Experts,
Is it possible to assigned the non labor resources like PC,Printer,Phone etc in resource management?
Thanks

Resources like Printer, PC and phones can be defined as non-labor resources and you can create a usage expenditure batch in preapproved batches for such resources. Resource management module deals with scheduling and utlillization of human resources.
Regards
Mubarak

Automatic assignment of hierarchy field in the main table

Hi,
We are upgrading from SRM-MDM catalog 2.0 to SRM-MDM catalog 3.0 sp07 patch 10.
In the main table, we have the standard field Hierarchy, that is a lookup on table Hierarchy.
In order to value this field, we have a specific field in the Main table, the UNSPSC code, that is a lookup on a specific reference table. This reference table makes the link between UNSPSC codes and nodes of the Hierarchy table.
After importing a new record that contains the UNSPSC code, we want to automatically assign a value to the hierarchy field in the Main table by the assignment's expression "[main table]UNSPSC code. [specific table]name of hierarchy. [Hierarchy table]name of hierarchy".
When executing this assignment, we get the error "Assignment operation failed: A runtime error occurred while evaluating an assignment, validation or calculated field".
Do you know if this kind of assignment is possible (it worked in MDM 5.5 but not anymore in 7.1) ? Or if there is a workaround ?
Thanks for your kind help.
Catherine

Hi Mandeep,
Thanks for your answer.
But, I do not want to assign a specific value to the Hierarchy field in the Main table. I want to determine it via a specific table.
Here is a sample of our data model to try to explain :
Main table :
item reference [Display field]
hierarchy --- lookup on Hierarchy table
UNSPSC code --- lookup on Specific reference table
Hierarchy table :
hierarchy name [Display field]
hierarchy code
Specific reference table, type flat :
UNSPSC code [Display field]
hierarchy name --- lookup on Hierarchy table
After import, in the Main table, item reference and UNSPSC code are valued.
In order to value the hierarchy field in the Main table, we would like to use the specific reference table :
[Main table]UNSPSC code >>> [Specific reference table]hierarchy name >>> [Hierarchy]hierarchy name.
This assignment works if the assignment field is a plain text field but not if it is the Hierarchy field of the Main table, which is on lookup on the Hierarchy table.
Thanks for your help !
Best regards,
Catherine

Is it possible to get the total value for column and assign to other field

hi,
Is it possible to get the total value of particular column and assign that value to another field?
How to do this?
Thanks in advance,
SAN

Afridi,
My extended controller class code:
package xxhr.oracle.apps.per.selfservice.appraisals.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageStyledTextBean;
import oracle.apps.per.selfservice.appraisals.webui.OverviewPageCO;
import oracle.jbo.Row;
public class XXOverviewPageCO extends OverviewPageCO {
public XXOverviewPageCO() {
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("XXCalcAvgButton")!=null){
throw new OAException("welcome",OAException.INFORMATION);
//getSum(pageContext, webBean);
private String getSum(OAPageContext pageContext, OAWebBean webBean) {
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject ratvo = (OAViewObject)am.findViewObject("CompetenceElementsVO");
OAViewObject valuevo = (OAViewObject)am.findViewObject("PerRatingLevelsVO");
Integer Sum = new Integer("0");
int numofRows = ratvo.getRowCount();
for (int x = 0; x < numofRows; x++) {
Object Rating =
ratvo.getRowAtRangeIndex(x).getAttribute("ProficiencyLevelId");
if(Rating!=null) {
int numofRowsforvalue = valuevo.getRowCount();
for(int i=0;i<numofRowsforvalue;i++){
if(valuevo.getRowAtRangeIndex(i).getAttribute("RatingLevelId").equals(Rating)){
Object StepValue=valuevo.getRowAtRangeIndex(i).getAttribute("StepValue");
Sum = new Integer(StepValue.toString()) + Sum;
OAMessageStyledTextBean displayCompAvg=(OAMessageStyledTextBean)webBean.findChildRecursive("XXCompAvgText");
displayCompAvg.setValue(pageContext,Sum);
return null;
But it is not affecting in the page.
Can you please tell me what is the problem.

Possibility to assign a color profile in the color management tab for more video formats

Presently, in After Effects CS5, in the color management tab of the "Interpret Footage" dialog box the possibility to assign a color profile to footage is grayed out for many video formats.
Formats that allow to assign a color profile include Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation as well as various image sequences, like tiff-sequences. (Motion JPEG A,B and Quicktime/MPEG-4 are not very helpful in this context because they have a small color shift when reimported to After Effects.)
Formats that do not allow to assign a color profile include Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V. (Here, H264 main concept has anyway the disadvantage that it has a color shift when reimported into After Effects.)
In After Effects CS4 it was possible to assign a color profile to Quicktime/H264, Quicktime/PhotoJPEG, DVCPRO HD 1080p30, but in CS5 this is no longer possible.
Those video formats that do not allow to assign a color profile automatically are interpreted as having the color profile HDTV (Rec. 709) Y'CbCr in case that the videos have 1920x1080 format; similar applies to PAL formats which get SDTV (Rec. 709) Y'CbCr color profile.
(I did not find anything of this automatic assignment to HDTV or SDTV color profile in the "interpretation rules.txt" file, therefore it must be written into the programme itself.)
With growing popularity of wide gamut monitors it becomes necessary to produce footage and other videos that have a color profile different from HDTV or sRGB. When such footage is reimported to After Effects it has the wrong color and the only workarounds are either to use (in After Effects) the effect "Color profile converter" which necessitates extra render time or to use somewhat unpopular formats, like JPEG2000 that has very large filesize.
Presently many footage is produced in Quicktime/PhotoJPEG and therefore it would be very desirable to allow to assign a color profile to such footage in the color management tab of the "Interpret Footage" dialog box.
Does anyone know why in AE CS5 the video formats Quicktime/PhotoJPEG and Quicktime/H264 do not allow to have an arbitrary color profile assigned (although it was possible in CS4), is it a bug, or does it have a deeper reason.
In this context I have a related question, often I read that Quicktime videos have a gamma tag. Does this mean that part of the color profile (the gamma value) is actually embedded/remembered, like you have it for images where the gamma is part the embedded color profile.
I use AE CS5 on Mac Pro 2009 with OS 10.6.7.
Thanks,
Volker

Thank you Rick for this interesting explanations and the links to articles.
In the past few days I performed a few tests in After Effects and it is interesting that you mention that cameras, like the Sony EX3, allow videos to have embedded color profiles. I am not working myself with cameras but either get footage from the internet or sometimes videos from our video department which produces videos with professional SONY cameras, usually I get them in a matrox mxf format.
As far as my test with After Effects show it is not possible to embed color profiles in the videos rendered with After Effects. Independent of the color profile in the working space and independent from the color profile in the output module I always get the same reaction if I reimport videos rendered by After Effects back to After Effects:
In AE CS5 videos made in the formats Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V are always interpreted as color profile SDTV/HDTV (Rec. 709) Y'CbCr (even if I made them in other color profiles, such as Adobe RGB, Photo RGB, sRGB); and there is no possibility to change this interpretation rule.
In contrast videos made in the formats Quicktime/JPEG2000, Quicktime/Motion JPEG A, Quicktime/Motion JPEG B, Quicktime/MPEG-4, Quicktime/Animation are always interpreted as sRGB (even if if I made them in other color profiles, such as Adobe RGB, Photo RGB, HDTV); only this time I can change the interpretation rule. Therefore if I know for example that if I had selected Photo RGB in the Output module I can change after the reimport the interpretation rule from sRGB to Photo RGB and only then I get again the original colors.
The only exceptions are picture sequences, such as tiff-sequences, where the original color profile is automatically selected in the interpretation of the footage.
Therefore, unfortunately for videos produced by After Effects your advice "If it says something like sRGB and you can change it, in most cases you shouldn't change it because the guess is probably right. If there is no color profile assigned then you should assume that is correct." is not so easy to be applied. You have to know how you did it originally in the Output module and hope that you can change it to the proper color profile, in case that the original color profile in the Output module was different from sRGB and HDTV/SDTV. But it is interesting to hear from you that with cameras there seem to be more possibilities.
For this reason it would be nice if in future versions of After Effects one could change the color profile in the the color management tab of the "Interpret Footage" dialog box also for formats such as Quicktime/PhotoJPEG, Quicktime/H264, H264 main concept, DVCPRO HD 1080p30, F4V.
Of course one can always circumvent shortcomings by using tiff-sequences, QT/jpeg2000, or QT/Animation as formats for storing, which is anyway better for lossless or nearly lossless storing, but the files are then too large and also cannot be played easily with a player.
Volker

It is possible to assign value range to non key fields in the table?

Hi,
I want to give some range of values to the fields which are non key fields in the table.
is it possible?
can anybody tell me the procedure.
Thanks in Advance,
venkat

HI,
It is higjly possible in case of Z-table. but in standard table you can't make any modification.
You assign the value range to the domain of field.
go to SE11 and open the database table.
Select the Data Element of the fieldto which you want assign the range.
Click on its domain .
click on Value Range tab.
Set the range.
Regards,
anirban

Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes in DRM?

When in a hierarchy, a user right clicks on a node to crate a new node, he has two options
-Child
-Sibling
Is it possible to restrict the user from creating a sibling and allow him to ONLY create child nodes?
Business cases:
1. different level nodes need to have different prefixes.
- Thus, the default prefix property definition uses the level number to assign a prefix
- Also, a validation, to ensure the correct prefix, uses the level number
But if the user can create a child and a sibling then the default prefix will only be right for a single case and not both.
Thanks

If the images are exactly the same size then make sure the layer with the mask
is the active layer and in the other documents go to Select>Load Selection and choose
your document with the layer mask under Source document and under channel choose the layer mask.
After the selection loads press the layer mask icon at the bottom of the layers panel.
MTSTUNER

Error while loading the Hierarchy to 0GLACCEXT

Dear all ,
I am trying to load a hierarchy ZEM 1 that is manually created in R/3. when I am executing the Infopackage its showing an Error that
1.Record 8 :Node characteristic 0GL_ACCOUNT is not entered as hierarchy characteristic for 0GLACCEXT
2.Too many error records - update terminated
and what is the the concept of 0BAL_DPEND to be added as attribute to OGLACCEXT.
Thanks

Hi Dash ,
I am providing the long test for the error ...Also can you tell me how I should use 0BAL_DPEND field as an attribute of Hieararchy of 0GLACCEXT. Coz i am supposed to do this
<u>Hierarchy for Characteristic 0GLACCEXT with Attribute 0BAL_DEPEND
The hierarchy for characteristic 0GLACCEXT is used as the financial statement version in BW queries. To technically enable the particular exception aggregation for contra items, the hierarchy table of characteristic 0GLACCEXT contains the attribute Balance-Dependency of a Hierarchy Node (technical name 0BAL_DEPEND).</u>
The Long Error Message
Diagnosis
    The nodes NODEID = [00000194, 00001627 ] have the same node names
    NODENAME = '10000000950090 '. This is not allowed because neither node
    is a leaf and both nodes are assigned to the same characteristic
    0GL_ACCOUNT .
    Note that a maximum of 50 characters is available for message variables.
    The node name NODENAME = '10000000950090 ' might not be displayed in its
    full length.
System Response
Procedure
    Try to localize the problem. If the hierarchy is loaded from an SAP
    source system, you can check whether the extracted data is correct by
executing transaction RSA3 in the source system. If necessary, check if
the data is modified with a user exit. If the hierarchy is loaded from a
file, check the contents of this file. The problem might also be due to
an error in the transfer rules or in the transformation.
You can identify the two duplicate nodes from the values for the node ID
NODEID = [00000194, 00001627 ].
The problem can be caused by identical nodes delivered more than once
from the source. It is also possible that incorrect values for
parameters such as the node name NODENAME or validity period [DATEFROM,
DATETO] are the cause of the problem.
First check if the value for node name NODENAME = '10000000950090 ' is
correct. The node name consists of the characteristic value for the
hierarchy basic characteristic and the characteristic values of all the
characteristics compounded to this characteristic. Errors creating the
node name often result in duplicate nodes. This problem also occurs if
the node names of all nodes are initial.
If the structure of the hierarchy is defined as time-dependent, the time
validity of a node can be restricted with the fields DATEFROM and
DATETO. Duplicate nodes generally do not occur if the validity intervals
of two nodes do not overlap in time. In this case check if the fields
DATEFROM and DATETO are correctly filled.
In this case the duplicate nodes are not leaves. If you want to reuse an
existing subtree at another location in the hierarchy, you can refer to
this subtree with a link node. Possibly one of the two duplicate nodes
were incorrectly not marked as link nodes.
please Suggest What to do

Default Account Assignment- product hierarchy

We have a requirement when any transaction posting to a write off G/L account to automatically include Product Hierarchy. I have used OKB9 before for C/C and P/C but not Product Hierarchy. Is this possible, if so, how?
Thank you!

AMS,
First make sure that the account is set to post to COPA. Make an entry in OKB9 for this account and click the Profitability segment indicator. Also, assign the account to a PA transfer structure (KEI2) to map the account to a COPA value field.
As far as assigning the product hierarchy to COPA characteristics, you have several options depending on whether you want the whole hierarchy assigned to one characteristic or if you want to split each level into seperate characteristics. Also, the hierarchy can be maintained in the material master in the general view (MARA) or the sales org view (MVKE), Let's assume you want to assign the whole hierarchy into a single field using the general data view assignment. To do this just create a table lookup step in KEDR. Select table MARA as the source. Field MATNR will automatically be match to your COPA product field (ARTNR). In the assignment section select field PRDHA from table MARA and enter the COPA characteristic field you want to store this value in. If you haven't yet assigned the product hierarchy characteristic to your operating concern you will need to do that first.
thanks,

PowerView option - Drill Down one level at a time also hide the columns other than the hierarchy columns

Hi All,
I have a simple PowerView report (Excel 2013) in which I have a hierarchy (three columns), an image column, and a Value column:
When I change the Show Levels option to "Rows - Enable Drill Down One Level at a Time", image column also hide.
I want to keep the image column displayed while drill down/up to the hierarchy.
Is it possible? If yes, then how?
Thanks & Regards,
Muhammad Ehsan
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Hi Muhammad,
According to your description, you have images at child level. Now you want to have the images displayed when have the child level items collapsed. Right?
In this scenario, when you show the data in a matrix in Power View, those images, Size ID and Prices have been added into a child group. If we enable drill down, all the items within the child group will be collapsed. We can't change it at all in Power
View.
For your requirement, we suggest you design your report using SQL Server Data Tools in Reporting Services. In Reporting Services, we can have specific columns toggled by the parent item.
Reference:
Add drill-down to a Power View chart or matrix
Drill-down Behaviour in Power View
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Is it possible to make the entire keywords hierachy export in the metadata?

I have created the following Keyword hierarchy in Aperture:
Location, Europe, Eastern Europe, Croatia, Dalmatia, Split
In Aperture I only need to add the bottom level 'Split' as a keyword and when I use the search function and insert a word from any of the higher levels (e.g. Croatia) It finds my picture.
My problem is that when I export that file the Keywords that get exported in the metadata is only the bottom level I first entered (ie Split). This is no use to me when using the files outside of aperture as I may still want to search at the higher levels.
Is there anyway to make the entire relevant keyword hierarchy be exported within the metadata without have to go back and add all the levels myself?

Unless things have changes, keywords are not hierarchical at all as a standard. The hierarchy in Ap is used just for managing keyword purposes only.
So it works within Ap but not when exported. You will have to assign multiple keywords or reestablish similar scheme in whatever other app that your are exporting the image to.

Is it possible to cusomize the layout of the manual ordering dialog?

Hello all,
I have a question about the layout for manual ordering.
The user should be able to order folders under a specific path manually. So I create a new layout set and add the UI Command "order_type_settings". So far, everything works fine. My question is, if it is possible to customize the layout of the organize folder dialog? The problem is, that the users are able to see the details dialog, if they open the context menu of a folder. Is there a possibility to restrict this context menu?
Thanks a lot.
Kind regards.
Nicole

Hi Nicole,
   Yes, you can. It's possible to restrict the context menu.
   As you see, you must use layout set. Each layout set use: Collection Renderer, Resource Renderer and details command. Each one of these, use command groups for folder, links and files.
   You can create a new command group in order to limit it.
   You should duplicate a layout set, and then you can assign it to a folder or your navigation iview.
   For more information:
http://help.sap.com/saphelp_nw04/helpdata/en/30/504a1e7f0e354bbf9adedf1a29f3ec/frameset.htm
Patricio.

Is it possible to change the "From Email Address in workflow"

I have a created a task list and set a workflow for the list.
Workflow Actions:
1. Send a Email to the "Assigned To" user whenever a task is created.
2. If the Task is due, send an reminder Email and even if its not completed, send a Email to the higher Management.
Workflow is working fine.
Issue:
The Email from address is the Email Address that has been entered in the SharePoint central admin Outgoing Email address.
I would need the from address to be of whomever has assigned the task to the particular person.
Let me know if its possible?

Hi Alex,
According to your description, my understanding is that you want to change the From email address in workflows.
The from address is set in the outgoing e-mail settings in Central Administration.
There is no OOB way to change it in workflows.
As a workaround, I suggest you develop your own workflow activity to do it.
Or, there is a CodePlex solution, it contains a Send Email Extended action which allows you to specify the sender, you can take a look at:
http://spdactivities.codeplex.com/
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Possible to change the room laout (Navigation)

I just succesfully created a coll. room in which it is possible for peple to discuss and upload docs. Now is it possible to change:
- The navigation: Edit names and place em in the second level navigation
- Is it possible to customize the documents part to my needs, like add more folders, put in some opening text and color. This is all pretty standard and i want to use this to develop a customized one. So:Can i import this in NWDS or sommit?!
Additionaly: when you would make a page for your customers that should be exactly like they wish, but has great similarity to existing collaboration tools. Would you then:
- Use the existing collaboration and customize.
- Create an own application
Is it possible to download these kind of applications from others?
Message was edited by:
Hans Wassink

Hi Hans,
Yes. It is possible. You can change layout of room.
Create custom layout for your need. And assign this layout to particular room.
Follow the given steps to change layout of the room.
System Adminstration -> KM Content
You can see list of folders in content area.
room extensions - > cm stores -> documents -> workspaces.
There you can see one or more folders named as 'documents'. Find your folder and change the layout of that folder. It will help to you.
Thanks and Regards,
Venkat

How to assign the dynamic value of PV to Sip Header in ICM?

Hi everybody,
I would like to ask your help, please. We are working on Temporary IVR Handoff (ICM+CVP). I need to add/modify a customer Sip header in ICM transfer script. The value for that header is dynamic and stored in the one of ICM Call Peripherial Variables (PV9, for examle).
Is it possible somehow to assign the value of that PV9 to Sip header (Set Variable Call.SipHeader)? I tried to do it but unfortunally without any success. I can assign any static string, but how to assign the value of the PV??? That's the question...
For static string assignment the syntax of the Set Variable Node (Call.SipHeader) looks like that:
"IVR-Handoff~add~It's Cisco"
and it works fine.
For dynamic value (PV9) I tried:
"IVR-Handoff~add~Call.PeripherialVariable9" - it add Call.PeripherialVariable9 as a string, but not it's value;
"IVR-Handoff"~add~Call.PeripherialVariable9 - returns a syntax error;
Call.PeripherialVariable9 - no Sip header is added.
What do you think? Is it doable at all?
Any ideas, answers or examples how to do it would be much appreciated.
Thank you in advance.
Dmitriy.

Hi Senthil,
Yes! It works, but with the little difference. The right answer is:
"IVR-Handoff~add~"&Call.PeripherialVariable9
(Call.PeripherialVariable9 is without quotes, otherwise it insert the name of the variable, but not it's value)
The other solution is shown here (thanks to Paul Tindall):
http://developer.cisco.com/web/cvp/forums/-/message_boards/message/15627744?p_p_auth=6psgR8ML
concatenate("IVR-Handoff~add~",Call.PeripherialVariable9)
Thank you so much for the idea! I very appreciate your help and vote you.

It is possible to assign the hierarchy of 0CUST_SALES to 0CUSTOMER

Similar Messages

Maybe you are looking for