It is possible to avoid the appereance of «yellow notes»

in a PDF when a hyperlink is touched by the cursor?
It may involve undesired information.
Thank you.

You'd probably want to call Apple Support directly. These are user-supported forums, so it would be tough for anyone to be able to say with any real authority.

Similar Messages

  • I use photoshop 6 (mac) if I subscribe to Premier CC do I have to subscribe to Photoshop CC also I want to use 6 as long as possible to avoid the subscriptions fees

    I use photoshop 6 (mac) if I subscribe to Premier CC do I have to subscribe to Photoshop CC also I want to use 6 as long as possible to avoid the subscriptions fees

    Completely separate products, so nothing to fear.
    Mylenium

  • Is it possible to change the length of a note in the score editor?

    I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
    I don't want to do this by going over to the "Length" dialog on the left because I hate having to switch from thinking in terms of music notation and then having to think (temporarily) in MIDI ticks per beat, etc.
    I must admit that I'm finding it extremely frustrating to simply enter music into Logic in a score....I thought this was supposed to be one of its strengths but it seems to be providing amazing capabilities at the expense of ease of use for beginners.

    dhjdhj wrote:
    I thought I saw somewhere that it was now possible to adjust the length of a note in the score editor graphically, i.e. by clicking on the note and somehow adjust its length directly to change it from 1/4 note to 1/8 (for example).
    greetings dh... are you into Key Commands? There are two which will help you do the above in a trice:
    • Nudge Region/Event Length Right by SMPTE Frame
    • Nudge Region/Event Length Left by SMPTE Frame
    I set mine to the simple letter o and n
    - I click on a note and press o repeatedly.. it grows and grows longer and longer
    – I click on a note and press n repeatedly.. it shrinks and shrinks shorter and shorter
    All by little increments
    If you keep a Piano Roll window open while you do this, you can see the length do this exactly
    man, it is VERY quick and handy for changing the length of notes
    It really helps to have a view of the midi Piano Roll to cross check the exact length and position of the notes.
    Check out the Key Commands:
    • Set Next Higher division
    • Set Next lower division
    These change the note value in the transport bar near the time signature. Your time signature may be 4/4 but the "grid" on which the notes are appear in the Piano Roll could be displayed in quarter, 8th or 16th notes. If you experiment with these commands, then you can match the note lengths easily to the grid display visually (with the above nudge length commands)
    Also - you may like to experiment with the following 3 KEY Key Commands:
    1 • Nudge Region/Event Position Right by Nudge Value
    2 • Nudge Region/Event Position Left by Nudge Value
    This will move your selected notes forward in time or back in time according to the
    value that is set in the Transport bar - say it is 16ths .. then each press of the key will move the notes a 16th
    or if the value is 8th notes, then each press of the key forward or backwards will move the selected notes forward or back by this amount
    ... amazingly useful when you are taking a whole phrase and pasting it somewhere else, or if say you started to write a phrase in the Score Editor and you started on the wrong beat.. then you just Nudge back and forth
    3 • Set Nudge Value to Division
    .. this will in a trice change change the Nudge Value to whatever Note division value is set in the Transport bar
    HTH and forgive me if I have given you too much information
    ..problem is I spent too much time in the Transport Bar in Los Angeles last year drinking with the iSchwartz and other Logic reprobrates... you should join us some time

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    As Tom said the FCS forum is the better place to post the question.
    Here is Apple's best practices doc for installing both on the same system.
    BTW, FCP7 is part of the FCS 3 suite of apps.
    Russ

  • When the light turn yellow not green what is that mean

    when the light turn yellow not green what that mean

    It means, Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.  Take a look at this link, http://support.apple.com/kb/HT4600

  • Is it possible to avoid the or in this sql?

    Hi there,
    I have a subquery at work which is givng me some performance issues ... (I've changed the table and columns names).
    select h.name, h.age, h.sex, h.height, h.occupation
      from human h
    where h.newest = 'Y'
       and h.death_date is null
       and (i_department_ids is null or
           (i_department_ids is not null and
           h.unique_id in
           (select m.unikt_id
                from departments d
               where d.department_id like i_department_ids)) and
           (INSTR(i_apartment_numbers, aki.apartment_id) > 0 or
           i_apartment_numbers is null))i_department_ids and i_apartment_numbers can be null one at the time, but not both at the same time, this is checked elsewhere. My problem is with the two OR operators. As soon as I have the OR, a full tablescan is executed. A search can take as long as 13 secs. Without the OR operators it takes 0.0062 secs. The reason I use the OR operators is that if the input variable's are null, the condition must evaluate to true.
    If there a way I can avoid using the two OR operators, so I will avoid the fulltable scans?
    many thanks,
    William

    A blind shot. Try this.
    select h.name, h.age, h.sex, h.height, h.occupation
       from human h
      where h.newest = 'Y'
        and h.death_date is null
        and case when i_department_ids is null then 1
                 when i_department_ids is not null and
                         h.unique_id in
                         (select m.unikt_id
                              from departments d
                             where d.department_id like i_department_ids))
                               and INSTR(nvl(i_apartment_numbers,aki.apartment_id), aki.apartment_id) > 0) then 1
                 else 0 end = 1
    Edited by: Karthick_Arp on Nov 3, 2010 5:42 AM
    Included Toon's conditino aswell.

  • Is it possible to make the pasteboard and menus not so dark?

    We just upgraded to the new CC version of Indesign. Is it possible to make the paste board and menus/palletes white, or at least not so dark? It is very difficult to see darker colors in the color palette. The high contrast between the dark pasteboard and the white page gives me a splitting headache.

    apologies for the double post. I was not sure how this worked, and did not think it went through the first time. Can you diresct me to where that answer is? We did not see a reply regarding that.
    Thank you for your reply.

  • I have lost my iPhone 5. Is it possible to load the backup data (including notes) from the iPhone backup to my iPad (air)?

    Hello I had an iPhone 5 that i have now lost. I'd like to access the backup for that phone, particularly the notes data. Is it possible to access the backup data via my iPad air?
    If not do i have to wait until i get my new iPhone then restore from the backup?
    if someone could point me in the right direction ASAP?
    many thanks

    Hello Jim
    just thought id let you know that i bought the iexplore software, downloaded it and solved my issues in less than 5 mins!
    great tip, thanks for your help.
    regards
    Charles

  • Why is it possible to change the internal bank, but not the account

    In a FI Document, the filed BSEG-HKTID (bank account) is not changeable, while the field BSEG-HBKID (home bank) is changeable on a customer line.
    The two field are in the same group for field status management: I checked both the posting key and the account field status, and both the field are optional and displayed. The modification rules also allow for the change of HKTID, without restrictions, but the field remain locked.
    The result is that it is impossible to change the home bank on the transaction.
    Any Hint?

    Hi,
    I guess you set document chang rule in OB32. But if you want to change BSEG-HKTID  Real Estate have to be active, refer to note 953374.
    Best regards,
    Feng

  • While Export the data to MS Word - How to avoid the Frames ???

    Hi All,
    I export the data from Crystal Report XI to Word document (doc) file , i used Text objects in the Report , in document file it's converted to  Frames and overlapped with other frames(so some data are hidden). is it possible to avoid the frames while exporting the report to word document.
    Thanks in advance.
    J.Baski

    Hello,
    It would be better if you format your report so your objects do not overlap but I realize sometimes it can't be avoided.
    Other option is to upgrade to CR XI R2 and test again, it is a free upgrade.
    Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
    Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    Other option is to export to Word Editable may be a solution for you also.
    Thank you
    Don

  • Self Test Error -50002, The specified device is not a valid device.

    I'm just an IT guy that knows nothing about Labview or DAQ cards that has been given the task of setting up a lab.
    System is Dell GX280 with Windows XP SP-2. The DAQ card being used is a NI PCI-6251. The software used is Labview 7.11 and NI-DAQ 7.4.
    Labview loads the professor's VI files as expected but when you start the vi it returns the following error.
    Error -200157 occurred at the Traditional NI-DAQ Compatibility VI:AI Group Config.vi-> DAQmx Create Channel(AT-Voltage-Basic).vi
    Also when you enter the Measurement and Automation application and browse to the device and execute a self-test it returns the following error.
    Error -50002 occurred at Self Test
    Possible Reason(s):
    The specified device is not a valid device. The Operation could be completed as specified.
    My question is are these errors because there are no devices connected to the DAQ? The professor claims that if nothing is connected it should still function properly. So now I'm trying to figure out what is wrong and the professor is not the friendliest in the world. I have tried reinstalling Labview and NI-Daq several times now and no luck using two separate computers. I would appreciate any assistance.

    Hi Rice IT,
    Since you are new to using this whole DAQ thing, then I'll start with just the basics.
    Make sure you have no NI Devices in your computer (if you do, remove them then begin).
    Install LabVIEW.
    Install the latest DAQ drivers for your system (for you it's NI-DAQmx Version 7.5 for Windows 2000/NT/XP).
    Power down the computer and insert your DAQ board.
    When Windows boots you should see the New Device Wizard.  Have it search for and install the drivers.
    Open Measurement and Automation Explorer (MAX) to test the device (Start > All Programs > National Instruments)
    Go to My System > Devices and Interfaces > NI-DAQmx Devices, you should see your DAQ device.
    Right-click on your device and click Self-Test.  If the device passes it should be ready to use
    If that causes an error right-click on the device and Reset Device.
    Redo Step 8 and perform a Self-Test of the device
    If the Self-Test still does not work, then the board could be
    broken.  Try to place the board in a different PCI slot, if other
    boards are available then try to use a known working board in your
    system.  If you still have trouble contact Technical Support.
    Now your device should be working.  You can try to run a Test Panel and look at how your device performs.
    You could also right click on Data Neighborhood in MAX and
    Create New... DAQmx Task and try to make a more customized measurement.
    Finally you can open an example in LabVIEW
    Open LabVIEW > Open > Examples (or Help > Find
    Examples) > Browse > Hardware Input and Output > DAQmx. 
    Choose an example that is similar to what type of operation you are
    trying to perform. 
    Typically you will want to start with an example and then
    build up from there.  If not, then you will want to take a look at
    this KB
    If you run into any problems, first read thru what the error message is
    and where it occurs.  If that can't help you isolate the error,
    then try searching ni.com for more information.  If you can't find
    anything there, then check the forums to see if somebody else has had a
    similar fate.  Finally if you cannot find any more information
    contact NI's Technical Support.
    Here are a few more resources that might help you with some of the basics:
    Introduction to Data Acquisition
    Learn 10 Functions in NI-DAQmx and Solve 80% of
    Data Acquisition Applications
    NI DAQmx FAQ
    I hope you are able to get a better bearing of where you need to go from this information.
    Regards,
    Otis
    Training and Certification
    Product Support Engineer
    National Instruments

  • Error in "niDMM Configure Measurement Digits.vi" - The session handle is not valid.

    I get the error message below, when I run my LabVIEW program as an EXE, but no problem while running under LabVIEW development. Why is there any difference between the build EXE and the development environment (it uses the same VI's) and how can I debug this problem?
    Running LabVIEW 2010 SP1.
    Error message:
    Error -1074130544 occurred at niDMM Configure Measurement Digits.vi
    Possible reason(s):
    The session handle is not valid.
    TIA
    Bent
    Attachments:
    ErrorMessage.png ‏7 KB

    Dear All
    I also got this problem while using GPIB to control my function generator(HP33120A).
    Here's my error message
    Mode.vi<ERR>Driver Status:  (Hex 0xBFFA1190) The session handle is not valid.
    And my code was from the modified example of driver as following:
    please help me to figure it out. Thanks a lot!!

  • TA38633 is it possible to avoid having to do a "restore" entirely ? Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?

    Regarding error 1601 - is it possible to avoid having to do a "restore" entirely ?
    Also if i have to do a restore, i have windows 7- do i follow the steps for Windows XP?
    Many thanks

    I'd refer to this
    http://support.apple.com/kb/TS3694 (talks about security software and this error)
    and this
    http://support.apple.com/kb/HT1414
    I've had Windows 7 for a while, but it seems the steps in iTunes are identical. 

  • Is there any way to have an ipad wifi 3G but not use the 3G (therefore avoiding the extra data plan costs) and just use the wifi?

    i am looking to buy an ipad 2 or the new ipad (preferably 32gb) but dont want to buy the 3G version as i have unlimited data usage in my mobile phone plan, i know the wifi only ipad is generally cheaper, but i was wondering if there was a way to buy the ipad with 3G capabilities but not use the 3G and avoid the cost of paying the extra unnecessary data plan? (I know this is a really weird question but i have the opportunity to buy a 3G ipad and was curious of the possibility? any help would be greatly appreciated. cheers

    Yes to your questions.
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    If you want an iPad 2 32GB it will have to be a refurb model. The only new iPas 2 is 16GB.
    What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
    http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
    What are all the differences between the iPad 3rd Gen models? Which should I buy?
    http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
    Should I Buy a New iPad? Or an iPad 2?
    http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
    iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
    http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
    iPad Q&A
    http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
    A Few Questions (and Answers) About the New iPad
    http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the-   new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
    New iPad: A Polishing of the Old
    http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
    iPad 1, 2 and New Specifications
    http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
    16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
    http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
    How much content will fit on my iPod or iPhone?
    http://support.apple.com/kb/HT1867
    If you think you may get an iPad 2:
    Refurbished iPad Prices
    http://store.apple.com/us/browse/home/specialdeals/ipad
    New 16GB iPad 2 Prices
    http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
    When iOS 6 comes out in the fall, the iPad 3 will get Siri, but the iPad 2 won't.
     Cheers, Tom

Maybe you are looking for