It is possible to change the Inhibit signal to active high (7344 controller)?

Normal the controller 7344 generate an Inhibit signal active low. We can receive this signal from the UMI 7764, and send it to the motor drive.
We have a Nanomotion drive type AB-5. For that type of drive the is the Enable signal that is active low. It is possible that this generate a problem of dialogue between the controller and the drive? I means that it is possible that a signal that the controller explicite like inhibit is interpretated by the drive like enable and vice versa. If it is true, how is possible to swap the inhibit signal to active high?

You can set the polarity of the inhibit signal in MAX. Select the Axis Settings of your 7344 settings. To the lower right hand side there are the options for the inhibit output polarity.
Best regards,
Jochen Klier
Applications Engineering Group Leader
National Instruments Germany GmbH

Similar Messages

  • Change the owner of DTR activity

    Hi Experts,
    Is it possible to change the owner of DTR activity? Our pratice is that the project leader will create an activity and then assign the activity to the dedicated developer. Right now, in NWDI, if a user created an DTR activity, he will be the default owner. However, we cannot re-assign the owner to other user. Would be appreciated if any advise on how to achieve it.
    Thanks in advance

    Hello Tom
    I see that you have not been able to find a solution for this.
    Can you provide some more information which may help the other SDN posters to assist you?
    Thanks
    Kenny
    Moderator

  • I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD? If yes, where I find a tutorial about this? Thanks a lot and best regards all.

    Hi people,
    I'm typing from Brasil, sorry my English.
    I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
    I intend to keep the original DVD driver and install the SSD in the same HD place.
    If yes, where I find a tutorial about this?
    And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
    http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
    What brand and model of SSD do you recommend?
    Thanks a lot for now and best regards all.
    Carlos Sgrillo
    Porto Alegre, RS, Brasil

    Tukaine
    Sep 23, 2012 10:59 PM
    Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
    This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
    Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
    When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
    If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
    Fixes people have used in the past included:
    Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
    Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
    Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
    Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
    HDD Fan Control
    HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
    It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
    Instead of HDDFan Control, get the free SSDFan Control
    http://exirion.net/ssdfanctrl/

  • Is it possible to change the timer increment?

    The timer is changing in increments of 100 milliseconds. Is it possible to decrease this to 1 millisecond? For my application, I need to know when the waveform time is a millisecond multiple of a specified number, for example, 7. I have a boolean indicator, and I would like it ot show true every time the time is a multiple of this value.
    Is is possible to change the timer increment to accomplish this? Or is there a better method for achieving my goal?
    Solved!
    Go to Solution.

    Your timing problem is in the Simulate Signal express VI.  You are telling it take 100ms worth of data.  Therefore your loop will run at around the 100ms.  If you want your loop to iterate at the 1ms (good luck with Windows), tell the express VI to only gather 1ms worth of data.  In your case, that would be 360 samples instead of the 36k samples.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • Is it possible to change the ALV report layout settings in spool request

    Hi All,
    Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
    Regards,
    Jyothi CH.

    Hello,
    Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
    As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
    Regards,
    Christophe

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID from one account to match the second account, without losing the information on each account?

    Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
    thanks

    Welcome to the Apple Community.
    It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts.

  • Is it possible to change the video card of a pavilion g7-1075dx?

    So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.

    Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.

  • Is it possible to change the colour of box in script from black to blue

    Hi,
    Is it possible to change the colour of box in script from black to blue  or some other colour and background colour also...if so how....
    Thanks.

    No..
    It is not possible in scripts..
    In scripts u cannot use colors..
    In smartforms u can do that..
    reward if it helps u..
    sai ramesh

  • Is it possible to change the order of the fields in the int table?

    Hello
    Is it possible to change the order of the fields in the int table?
    Lets say itab has the following fields :
    F1, F2, F3
    I would like to see it as F2 F3 F1
    Thanks

    >
    Comandante Che Guevara wrote:
    > Lets say itab has the following fields : F1, F2, F3
    >
    > I would like to see it as F2 F3 F1
    What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
    If you want something else other than display the field, you have to explain your req. in detail.
    BR,
    Suhas

  • Is it possible to change the color of the folders in OS 10.10.2 Yosemite?

    Is it possible to change the color of the folders in OS 10.10.2 Yosemite?

    You can try these after backing up.
    Folders – Color folders
    Folders – Color folders Mavericks
    Folders Factory – Color folders

  • Is it possible to change the color of the regions in GB 11?

    Is it possible to change the color of the regions in GB 11?

    Gourmet Pizza wrote:
    Is it possible to change the color of the regions in GB 11?
    only an imported orange region (to purple):
    http://www.bulletsandbones.com/GB/GBFAQ.html#orangetopurple
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
    or
    Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
    Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
    Peter

  • Is it possible to change the chart of accounts in Oracle Financials?

    Dear Colleagues,
    Is it possible to change the chart of accounts in Oracle Financials?
    Thank you in advance.
    Andrey

    It is not an easy change. Oracle typically recommends against it but sometimes company structure or processes change so much that you are forced to do it.
    Take a look at http://www.vantagesolutions.com/media/SCOUG_May_2004.pdf as well as http://www.erpstuff.com/forums/topic.asp?TOPIC_ID=6381.
    If you google "change oracle chart of accounts", you will find some more hits as well. This is a big project.
    If you other business reasons to do a reimplementation, then changing COA as part of that will be very easy.
    For a lot of companies debating between reimplementation and upgrade, a need to change COA becomes the last straw in favor of reimplementation.
    Hope this helps,
    Sandeep Gandhi

Maybe you are looking for

  • Hyper V guest slow disk access

    I have a Hyper V cluster(2012) with a 2012 guest running 2012 acting as my file server. My 2 hosts are connected to a gig switch stack which in turn is connected to my Dell MD3200i. My file server has a "data" disk that is a VHD(fixed) on the iSCSI s

  • Connecting to projector via display port

    I have been using the display port on W700 via HDMI cable to connect to my projector OK and then next day can not get either to talk to each other.  What might be wrong?  Have tried connecting both in alternate ways with cable - switching one and the

  • New portal component not available for new iView

    I've just written my first portal component using the NetWeaver Developer Studio.  It's a trivial "Hello World" application.  If I run it in the portal from the NWDS it runs successfully allowing me to capture the full URL. I tried to export the par

  • Change a field value in the  database table

    Hi, GB01 is the database table. GB01-BOOLCLASS = 009 GB01-CLASSTYPE = S GB01-BCLTAB = BSEG. GB01-BCLFIELD = GSBER. Upon input of above details,  will get table Record as BOOLCLASS    9     CLASSTYPE    S     BCLTAB       BSEG  BCLFIELD     GSBER BEXC

  • Why cant I bebug BO Method from Workflow decision step

    I have been trying for a while to find a solution. I have activated BO Debugging. I have set BO method as advance with dialog. all my efforts in vein. I could debug directly from SW01 but not from SBWP. Is there any trick to debug a BO method. I have