It is possible to connect the magic mouse, magic trackpad and the apple wireless keyboard at once on the same Bluetooth network on the new iMac?

I want to buy a new iMac but in my country the iMac just come with the magic mouse and I want the trackpad for the multitouch geastures. Can you help me with this question?

Yes you can have multiple Bluetooth devices connected simultaneously. I believe you have have up to 7 BT devices at one time.
Also you may find http://www.apple.com/support/bluetooth/ helpful.
Roger

Similar Messages

  • TS3048 Apple wireless keyboard spacebar glitching out. Every time I press the spacebar it causes me to exit the dialog box  or it takes me to another another desktop window! Frustrating. any help appreciated.

    Please read title

    Hello PBnanas,
    I would be concerned too if the spacebar was not responding correctly.  I found an article that can assist with troubleshooting issues with keys not responding correctly. 
    I recommend following the steps under the section titled, "Some keys don't work as expected" in the following article to isolate and troubleshoot the issue you described:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • Unable to wake screen using magic mouse or trackpad after installing magic mouse

    Dear Everyone,
    I am using mbp 15 inch early 2011 with 2 GHZ intel i7 processor and a  4gb ram. I would like to tell you that i have installed the mac os x lion and quite happy with the improvement. however, there are same changes which i am not sure whether it is that my mac that causeing theproblem or the bug from the lion itself. i am unable to wake my mbp screen using my magic mouse or trackpad after installing lion. i believe that my mbp has not really enter sleep mode as i dont see the sleep indicator at the bottom right corner flickering. i also believe that it is only the screen that goes to sleep while the hard disk is not. Normally a single swing  of the magic mouse or a single swipe of the trackpad will normally wake the screen. in order to wake the screen now is only to click on the magic mouse or trackpad. furthermore, scrolliing page using magic mouse also become unusual after installing the lion. does any of u happen to come across these problems as well? Is there any other way to downgrade to snow leopard back? (i ask this in case that this issue really cannot be fixed). Please help me on this issue. Thank you very much for taking your time to read and reply this thread.
    Moonbasher (henry)

    First, Lion does not wake on mouse or trackpad movement, only clicks or keyboard presses.  This is presumably to avoid waking the computer from display or full sleep accidentally, and is just how Lion works.  It's going to take some getting used to, personally, but I've noticed my mac hasn't woken up on it's own.  Apparently moving about my apartment moves the mouse enough that Snow Leopard used to wake the iMac.  This is not a glitch, and unfortunately, a downgrade is a complicated matter, involving erasing the HD entirely, and restoring from a backup created in Snow Leopard and not used with Lion at all, or manually importing important bits of data, as libraries upgraded by new versions of Mail, iCal, etc will not be compatible with the old versions.
    In terms of your mouse scrolling, describe it in a bit more detail; Lion introduces "natural" scrolling, where instead of the mouse wheel moving the "window" over the contents, it moves the contents through the window, like scrolling on an iPhone or iPad.  In other words, think of your finger on the mouse as pressing on the page you're looking at and dragging it upward through the field of view.  I remember long ago thinking my very first scrolling mouse was backwards, and then adjusting to "down is down, up is up".  If this is the behavior you're experiencing, this also is the way Lion works.  This, however, can be changed in the mouse or trackpad preference pane in system preferences.  Simply deselect "natural" scrolling.
    In a more general sense, its usually not a good idea to do a major software upgrade on your primary machine unless you're willing to deal with some zero-day glitches.  It sounds like the issues you're having aren't actually glitches, and you should be happy for that, but in the future, you might want to wait a few weeks for other users with more experience with major OS launches to find those bugs and point them out to the community for Apple to fix.  In terms of an OS launch, I think this has been absolutely one of the best.  I'm seeing very few major glitches resulting in lost data, few things that would really destroy my personal workflows, and compatiblity issues with other products seems to be well documented or negligible.  It's also a bit hasty to assume that mere hours after launch Apple would have any ability to fix ACTUAL problems with the OS.  My recommendation would be to get used to the change; having to click the mouse at least means you'll never accidentally wake your machine bumping against your desk.

  • Connect multiple 2 apple wireless keyboards to one imac computer

    How to connect several apple wireless keyboards to one imac? Ive got 2 apple keyboards that I want keep and use in different rooms (have more screens connected there). I manage to connect my logitech edge keyboard and mouse in addition to the already connected apple magic mouse and apple wireless keyboard. But it does not seem as if the imac will accept another apple wireless keyboard?

    Hello Steve:
    I have not had a similar problem so I am fishing a bit. I think the problem is rooted in what I thought in my previous post.
    Now, how to fix it?
    Try this:
    Go to system preferences>bluetooth. Delete any KB entries there. Trash a preference file (com.apple.bluetooth.plist). Be sure that on and discoverable are checked in the BT preference pane. Restart your computer.
    Hopefully, whatever KB you have turned on will be "discovered."
    Barry
    .

  • Ever since I used an apple wireless keyboard, the onscreen keyboard will not appear

    I have been using the iPad for several years. Recently I added the apple wireless keyboard. Ever since, when I do not have the apple wireless keyboard the onscreen keyboard refuses to appear. Makes entering text difficult! Wuld be happy to learn of a solution. Thanks.

    Welcome to the Apple Support Communities
    Did you turn off Bluetooth after turning off the Apple Wireless Keyboard? Open Settings > Bluetooth and turn Bluetooth off.
    Another thing you can do is, before turning off the keyboard, select a text box on the iPad (for example, when you type an email or you type on a Safari webpage) and press Eject key on the keyboard, so the virtual keyboard will show

  • My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

    My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
    Help!

    No, unless you are using a home theatre system already, your only option is to connect to the TV.

  • My wired Apple Magic Mouse is frozen and I am unable to move around on my Mini Mac.  I receive a window saying the computer cannot locate a wireless mouse.  How do I get my mouse to work again.

    My Magic Mouse is frozen.  How do I get it to work again?  Also I keep getting a window that says it cannot locate my wireless mouse.  I do not have a wireless mouse.

    Got confused between your header question about a wired mouse and the main question about a wireless mouse.  You said your magic mouse was frozen and added you do not have a wireless mouse.   Problem is ... the magic mouse is wireless.   The original mighty mouse was the corded version.
    The wired mouse is a regular problem.  After two to three years it tends to clog up. You can clean it (to a degree) as follows.
    Using an alcohol moistened, not wet, cotton bud, scratch at the mouse ball for a minute or so.   Then turn it upside down and on a clean piece of thick white paper or card on a firm surface, vigorously rub the mouse ball on the paper in a regular figure of eight.  Do this for a minute or so and occasionally tap the mouse on the paper.   This will help dislodge bits of fluff etc.   Then try again

  • Can i connect my apple magic mouse and my apple wireless keybord with my pc?

    can i connect my apple magic mouse and my apple wireless keybord with my pc?

    try it find out

  • After updating OS X 10.8.5, bluetooth is not available in the menu bar. The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.

    After updating OS X 10.8.5, bluetooth is not available in the menu bar.
    The Magic Mouse is recognized and working but the bluetooth mouse functions do not work.
    I have downloaded and installed 10.8.5 combo but it does not help.
    Menu bar - System Preferences/ there is no bluetooth item
    I restarted with cmd + alt + P + R it doesn't help.

    Did you try the suggestions from your other post on this?

  • Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

    Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

    You can purchase an adapter from apple that uses the monitor cable from the projector, its the same one that is probably connecting either your laptop or school workstation. On the projector control you might need to refresh the source.

  • Keyboard and the magic mouse cannot  using and pairing in win7

    keyboard and the magic mouse cannot  using and pairing in win7
    already install boot camp in  win7  but can using in  OSX

    thanks I tried re installing the drivers (which were working fine before this windows update) but unfortunately it did not work. I can not access my bluetooth settings at al in windows yet it works fine on the mac side of things (I'm using them to type this)

  • Apple wireless keyboard and magic mouse disconnecting

    Just bought new MBP Retina Display (OSX 10.8.2) to replace 1st Gen. MacAir.  Used to use Apple Wireless Keyboard and MM on old Air and worked flawlessley for years.  New MBP installed both of these older items (keyboard and MM) cleanley when I set up, but almost instantly, after about one minute of working, the keyboard and MM disconnect themselves and the only way to reconnect is power them off and then power back up.  I have hanged the batteries on both to high end ones and they are still holding charge very wel.
    In my office I have a work PV that also uses two USB wireless devices for the PC keyboard and mouse and then also a small HDX Jam Bluetooth speaker.  Also, my iPhone and iPad are around.  My Airport Express is about two feet away from the MBP as well.  Again, all of these worked just fine with my Air for over five years.
    I took the MBP, keyboard and MM into the Apple store and had them check it out.  Of course it worked perfectley while I was there, plus I learned that in my new MBP the wireless card has the bluetooth built into it and unless my wireless connections got wonky, then the chances of it being hardware were slim.
    I am so out of options.  I have tried to identify all environmental factors.  I have tried moving the MBP closer, further, etc. and still nothing.  It is the wierdest thing and now getting very frustrating because I am having to use the MBP keyboard all the time and it is supposed to be up on a stand and in a more ergonomically friendly position.
    Anyone got any suggestions?  Is there something I am missing?  Is there something in my environment I am unaware of that could be contributing to this?

    I have a 15" MBP Retina display from 2012, Lion 10.7.5, running lid closed with bluetooth mouse and keyboard.  My desk configuration has not changed but in the last couple of weeks I get both devices disconnecting simultaneously, once or twice per day.  The dashed bar disappears from the Bluetooth icon in the menu bar.
    I turn bluetooth off and on (lift the lid, using keypad), and then it all works again.  I don't need to even touch the mouse or keyboard they instantly reconnect.  It is not the magic mouse battery problem, I've suffered through that and have it licked, and that would only take out the mouse.  There's nothing obvious in the system logs.  No change I know of in nearby electrical appliances or WiFi configuration.

  • I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes.

    I can't connect to the itunes store. I have the latest version of itunes on my windows 7 computer. I can connect to itunes from my ipad and ipod but no my windows computer. i dont get any error message, the bar at the top just says accessing itunes

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help please...

    I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...

    You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
    http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
    Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
    http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
    Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
    http://fastmac.com/bluetooth.php
    In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported.

  • Logitech mouse started to lag after connecting Apple Wireless Keyboard

    Hi,
    I'm using Logitech Anywhere MX mouse with Logitech unifiying reciever on my iMac and everything was working perfectly fine until I have
    recently bought an Apple Wireless Keyboard. For some reason after connecting the keyboard to my iMac my mouse started to lag.
    I'm not sure how this is connected to each other as keyboard is bluetooth and mouse is wifi but at this stage I wish that my cable keyboard
    would never broke.
    My whole Mac OS X software is up to date and so are the Logitech drivers (Control Center). Is any of the users expriencing such issues ?
    Any advices ?
    Regards,
    Jakub

    Thank you for your reply, I have repaired the device but it didn't helped, but switching USB ports seems to do the work, although not sure why Anyways - thank you very much!

Maybe you are looking for

  • Need help with installing my Pioneer external USB DVD/CD drive into G4

    Recently I bought the Microsoft Office 2008 for Mac Home and Student Edition DVD-ROM on my Dad's birthday for his G4 (OX Tiger), only to be reminded that the G4 only has a CD/RW drive! So I surfed amazon.com and got a Pioneer External USB 2.0 DVD/CD

  • In finder, why are my tags shown as blank white page of paper icons?

    After upgrading to Mavericks, I've had an issue in my Finder. On the left hand side where the Tags are displayed, instead of showing the corresponding colored dot next to the name of the Tag, all thats shown (for Red all the way through Gray) is just

  • Spry CSS keeps crashing DW

    I added a spry tabbed panel to a page... then I opened the CSS file and made a change, then clicked to switch back to the original file to see the change and DW crashes. I restart, open the CSS file, make the change and hit CTRL+S. DW crashes. There

  • Uploading Invoice with Discount in Line with DTW

    I am trying to upload some invoices with line discount with the DTW . These is an example. There is one item A00001 with 12.00 unit price and 10% discount on that item and 12 quantity. I tried to upload it but doesnt put the discount in the discount

  • Fetch XML data from CLOB

    Hi, I'm very new in Oracle. I have DB running on oracle 9i. On production DB one tablespace have CLOB datatype and this CLOB field have all techinal stuff stored in XML format. How DO I fetch this info? select info from infotbl; showing all the XML j