It is possible to skip albums

I’ve recently had to buy an iPod because Sony’s new players have removed gapless playback and so far I’m extremely happy with it, however I’ve encountered a slight issue and I was wondering if somebody could tell me if it is possible to skip albums and yet still play all songs.
For example, I want to listen to all songs. Via the menu I can select which song I want to start with, after a little time I realise that I want to jump to next album – is there a way that this can be done without just hitting ‘next’ the allotted number of times or by using ‘Cover flow’ because the problem with cover flow or using the album menu is that it will then only play the selected album rather than playing all tracks on the player starting at the selected album. Even using the ‘All Song’ menu is not ideal because it does not automatically go to the current song.
Therefore is there a button combination that will jump to the next album or is there a configuration setting that will allow me to play all songs on the player even if I select an album via cover flow etc. The new Sony players have an option to play ‘all’ or ‘selected range’ i.e. album or artist etc and I think that such a feature, if it doesn’t already exist, would be useful.

Short of marking the albums you don't want to play in the shuffle mode in iTunes (which I believe you are saying you don't want to happen) then there really isn't a way to skip a whole album. I'm a little confused on what you are calling ranodom mode and what you are calling album shuffle mode. When you say random mode, are you referring to when a specific playlist is played in shuffle mode or are you referring to when every song on your ipod is being shuffled? My original answer above was assuming you meant when all songs on the ipod is being played.

Similar Messages

  • Is it possible to skip the use of a router to get wireless from imac to macbook? (both osx10.5.8)

    Current setup is my imac (osk 10.5.8) is plugged into my dlink router. Wife gets her connection for her macbook (aslo osx 10.5.8) wirelessly from the router.
    Is it possible to skip the use of a router? That is, plug the ISP's inbound cable to my mac and somehow my wife's macbook be able to wireless connect to my iMac?
    Just looking to get around the router that is a possible cause for slowness.

    Some sort of router is needed for both of you to share the cable service. Is the router yours or part of the cable modem provided by the cable company? If the latter ask the cable company to service the device to be sure everything is working properly. If you have a separate modem and the router is yours, then replace it.
    Why do you believe your wireless is slow?
    I would also consider upgrading your computers' OS X.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.

  • How do I create a "place" in iPhoto's Places list? Is this possible the way it's possible to create albums? Also, how do I assign a place to a photo or vice versa?

    How do I create a "place" in iPhoto's Places list? Is this possible the way it's possible to create albums? Also, how do I assign a place to a photo or vice versa?

    Select a Photo in the iPhoto Window and click on the 'i' button lower right. This uncovers the Info Panel, and you can assign a Place there. Search on the name of the place and then move the pin to where you want it. This is all covered in the Help and in the tutorials.
    http://www.apple.com/findouthow/photos/#places
    Regards
    TD

  • Is it possible to preserve albums in iphoto backup to disc ?

    Is it possible to preserve albums when archiving iphoto to disc ?

    External Hard Drive? Yes.
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    Regards
    TD

  • Skipping Album pages (Index links to Slideshow page)

    is there a way to do this?
    i'm using iweb '08 to set up an online portfolio of sorts. 4 main pages: main/home, resume, portfolio, contact info.
    the portfolio page will contain 4 albums of various types of art/design work and i'd like to skip the actual album page when you click on the album, instead taking you directly to the slideshow page. is this possible?

    I have been trying to do the same thing but haven't had any luck, there must be a way of deleting the page and making a link to the slide show.
    I was also trying to improve image quality iWeb seems to make the images very soft even if I pump up the sharpness it doesn't seem to make any difference.

  • Is possible to skip first screen in BDC Session

    Hi all,
    Is it possible like  in call transaction method to skip first screen in Batch input session?
    Syntax----
    call transaction MM01 and skip first screen.
    I want same result By using Batch input session.
    Suggess..........
    Thanks
    Sanket sethi

    Actually i am open transaction SE38 and execute an Standard Report.In the selectiion screen I am changing something in layout.
    I recorded it by BDC.
    And use batch input session.
    Now i want to skip the se38 window i want to drop user on the execution of the report.
    I also do it by submit report but i want to know that is there any possibilities to use with BDC session.
    Thanks
    Sanket

  • Is it possible to put albums by name into a playlist instead of a list of individual songs?

    I'm creating playlists on my IPod Touch but when I move an album into the playlist all I get is a list of the songs. I'd like to be able to select the name of the album from the playlist. Is it possible, and if so, how?

    Shane B,
    I have the same model iMac with the same problem screen.
    It's the LCD panel that is defective,(at least in my case).
    You can validate this by getting a mini DVI adapter to connect the iMac to an external screen and test it on your HDTV or on any external screen.
    Get the proper adapter from Mini DVI to what you have on the external screen or TV (HDMI, DVI, VGA)
    and a cable to connect it and see if the image on the external screen or TV is OK.
    In my case, my iMac was sitting on a shelf for two years before I thought of trying this.
    I am now using it as a media server linked to my HDTV.
    I ended up opening the iMac case to disconnect the LCD so I would not have to look at the ugly defective display sitting right next to my HDTV.

  • Is it possible to associate album art to playlist and not the album?

    I've created some US versions of Beatle albums with a playlist.  Is it possible to assign US album artwork to the playlist while not affecting the UK album art associated with the song?

    No.
    tt2

  • IPod Nano skips album selection, not showing some songs

    Hello,
    recently I tried to use my ipod with winamp since it offers support for ipod, but since then, when I select any artist with an album and singles it ignores the singles, skipping directly to the songs in the album, and I really can't listen to that singles through the "artist>album>song" selection, but patiently I can find then togheter with all the other songs, by selecting directly "songs>all" in the menu...
    How may I fix this?
    thanks a lot!

    Right after I posted, I found another topic that basically answered my question.

  • Mouse scroll on cover flow skips albums

    Hello all,
    as the title states, when I did a mouse scroll, it used to flow through every album. At one point it started skipping some album. I have this problem quite a while now but it starts to get annoying. I have Windows x64 with the latest version of iTunes x64 and Logitech mouse with latest drivers (even thought the mouse doesn't seem to be the problem because mouse-pad scrolling is acting the same). I have tried changing how many lines the mouse roll scrolls each time but when I put one line at a time it skips one album (for 3 lines I think it scrolls 4 by 4). I have hundreds of albums so I'm not sure if there is some kind of algorithm that when you have many albums it goes 2 by 2 so you can scroll them or something... Any help will be appreciated.
    Cheers Jimmy

    If not a bug, it's certainly a design oversight rather than intentional behaviour. As far as I can tell it's present on all iPods, it's just more obvious on the classic, and to some extent it's also present in iTunes. If you select the browser view so that you get a listing albums on the top right you might expect that each line would represent a single album, but if you have more than one album with the same title you still only get one line. Workarounds are as Jeff suggested, e.g. *Album - Artist*, appending different numbers of spaces to the album title for each different album or giving each album different Sort Album values. Personally I prefer the first method as it clearly distinguishes albums in the iTunes browser.
    tt2

  • Is it Possible to View Album info on my TV

    I have all the necessary gear to view videos and photos on my TV (and can view) but can't seem to get the album art or song title etc. to come up on the TV monitor while playing music. Is there something i'm doing wrong or is it evan posible? If it's not possible, Apple missed (and i love my iPod, but) a big feature here.
    Thanks
    Dave

    Thanks for the reply Chris...perhaps Apple will supply a software update that will add this feature...i'll bet they'll make us purchase a new model for this simple featue though...Dave

  • Possible to Remove 'Album' From iTunes Hierarchy?

    I'm a 1 song per band kind of person, I have maybe 2 thousand songs and I probably have almost 1000 artists. The 'Album' folder hiearchy is completely useless to me and just another level that I have to transverse. Is it possible to Get iTunes Library to merely do 'Artist/Song' folder hierarchy?
    Even better, I like the fact that it will automatically sort out a folder hiearchy by looking at tags to determine what Artist is involved, but I hate the fact that it then renames the file into just the song title. Is there any way I can get it to sort the files into the tag-determined folders without renaming the file itself?
    Ideally, my final solution would look like this:
    Pre-sorting:
    File Location: C:\TuneFolder\
    Physical File Name: Artist1 - GoodSong2.mp3
    Artist Tag: Artist1
    Title Tag: GoodSong2
    Post-sorting:
    File Location: C:\TuneFolder\Artist1\
    Physical File Name: Artist1 - GoodSong2.mp3
    Artist Tag: Artist1
    Title Tag: GoodSong2
    Anyway, thanks for helping out a newbie,
    -R

    As long as you have iTunes set to manage library and to copy files to library you are stuck with the album folder.
    I believe that the renaming can be turned of but I have not done it.

  • Possible to use album art as desktop?

    Is is possible to have ITunes display the album artwork for the current song as the desktop pattern. A utility or addition to ITunes to do this would be a nice feature.
    - Elrond

    I go to Amazon (or any other place that has the album cover I want) and look up the album. Right mouse click on the picture and select "set as background"!
    I have a rather nice piccie of Tom Waits at the moment!
    You might have to do it a couple of times with different sized pictures to get decent quality - but it takes nan-seconds to do! And the possibilities are endless!
    MESH   Windows XP  

  • Skipping albums

    My i pod is skipping through whole albums ( tracks not joined). I now have 7 albums I cannot access at all. The hard drive is only one third full. Even after resetting and updating the albums are still not playing.

    Welcome to Apple Discussions!
    First, is everything updated?
    http://www.apple.com/ipod/download
    http://www.apple.com/itunes/download
    Also, you say you have reset and updated, but have you restored...
    http://docs.info.apple.com/article.html?artnum=60983
    Finally, do the songs play fine on the computer?
    btabz

  • Is it possible to skip the screen in BDC using IF statement.

    Hi Friends,
    I have written a report using BDC for tcode CO11 thru recording using CALL TRANSACTION.
    Case 1:
    If I go to transaction CO11 (screen number 100) and give the  order number which has more than 1 operations to be partially confirmed and press ENTER a pop-up screen (screen number 140) appears where in I need to select the operation number and after selecting the required operation number it automatically takes me to another screen (screen number 150).
    Case 2:
    If I go to transaction CO11 (screen number 100) and give the  order number which has only 1 operation to be partially confirmed and press ENTER it directly takes me to screen 150 skiping screen 140.
    When I enter the order number which has more than 1 operations to be partially confirmed on my selection screen, my code is working fine as needed.
    But, when I enter the order number which has 1 operation to be partially confirmed on my selection screen, it is giving me error in my BDCMSGCOLL saying that the screen 140 doesn't exist.
    Is there any way, Can I skip screen 140 using IF statement?
    My thoughts:
    1. calling screen 100.
          After calling screen 100, I have put the pop-up operation numbers in an ITAB.
          DESCRIBE table lines ITAB <variable>.
          At NEW <order-field>.
          IF <variable> = 1.
    2. calling screen 140. "I need some help here to skip the screen 140
                                        " Will this logic work?
          ENDIF.
          ENDAT.
    3. calling screen 150.
    Rest everything is working fine.
    Will my above logic works correctly? I would appreciate if someone could help me with this.
    Thanks in Advance.

    Hi,
    Try something like this:
    1. Call Screen 100.
    Check if screen 140 needs to be called depending on your custom logic. Lets say you populate a variable as 'X' if it needs to be called.
    Then write:
    if valiable = 'X'.
      Call screen 140.
      Enter Screen 140 details.
    endif.
    Call screen 150.
    Here the 'Call Screen' is nothing but the code you extracted after BDC recording.
    Thanks.
    Ravi'

Maybe you are looking for

  • Returning a parameter back to UIX app

    Hi I am wondering if I am doing this correctly or if there is a better way. I have created a UIXML page with two choice boxes. The second is populated by the selection of the first by querying a database with the first selection. I have an event that

  • Folders in Files Panel won't stay collapsed

    There are 2 folders in my Files Panel which won't stay collapsed.  When I open Dreamweaver, they are expanded.  If I click the arrow next to them a few times they will eventually collapse, but then as soon as I open any other file or folder they re-e

  • Multiple Speaker List is Wrong

    I have four AE cubes in my house. When I access multiple speakers from iTunes or my iPhone, the same list of speakers appears. However, the list of speakers is wrong. I have tried turning the availability of speakers on and off. I have rebooted the c

  • Rebranding WebMail / SquirrelMail

    When I go to WebMail I get a web page that says 'Mac OS X Server WebMail Login'. Which files do I need to edit to change this and add some of my own header graphics to the whole experience?

  • When I open Safari, how do I expand the size of the box?

    I can't seem to figure out the MBP command to expand the box once I click on Safari, or another application. I would like for it to take over the entire screen.