It is possible to unable the printscren key

Hello,
I am looking for a way that when we press printscreen, nothing appen. I look on the forum and i found nothing .
I am using LV 6.1 but if neccesary i can upload to 8.5 

The tab control is a good idea. If you act on the "Value change" event then you would actually need to make sure the stuff in that tab is hidden until you've actually verified the password. Otherwise you can click the tab, the password dialog comes up, and then someone can just move the dialog out of the way. You could act on the "Mouse Down?" event for the tab control. This allows you to cancel the action before it happens, but then you'd have to figure out if the click occurred on the tabs, and which tab was actually clicked.
If you wanted to you could even include a countdown time that automatically switches back after a certain amount of time. 
Attached is an example of hiding the super secret stuff. It uses the Login Dialog that ships with LabVIEW. This is purely meant for demonstration.
You'd still want to disable the print screen, though.
Attachments:
Hide Data.vi ‏38 KB

Similar Messages

  • Is it still possible to recover the license key of Dreamweaver CS6?

    I am unable to recover the license key of Dreamweaver CS6. I lost the box and I can't remember the account that was used to activate the software. Basically, I need to transfer the current license from one computer to a new computer, but since I can't find the license key I am not able to do it.
    Is it still possible to recover the license key of Dreamweaver CS6?

    if it's installed on a pc use belarc advisor to recover the key, Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
    if you registered with adobe, it will also be tied to your account info, https://www.adobe.com/account.html
    otherwise, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html

  • X100e BIOS Fn key swap - Is it possible to swap the physical keys too?

    We just received our first x100e ThinkPad and like many other users we did not like the Fn key location, so we have changed it via the bios setting that swaps it with the Ctrl key.
    However, is it possible to also swap the physical Fn and Ctrl keys on the x100e? Since we haven't had a Lenovo laptop before (we're a Dell shop), I haven't ever removed a key off a keyboard on a Lenovo laptop, so I'm not sure how easy it is to do so or if it's even possible at all, but if it is doable then please post any instructions you can think of to show us how to do it safely Removing keys on other brand keyboards (Dell's for example) is simple enough, so I'm hoping it is for a Lenovo as well.
    Thanks in advance!

    trafsta wrote:
    We just received our first x100e ThinkPad and like many other users we did not like the Fn key location, so we have changed it via the bios setting that swaps it with the Ctrl key.
    However, is it possible to also swap the physical Fn and Ctrl keys on the x100e? Since we haven't had a Lenovo laptop before (we're a Dell shop), I haven't ever removed a key off a keyboard on a Lenovo laptop, so I'm not sure how easy it is to do so or if it's even possible at all, but if it is doable then please post any instructions you can think of to show us how to do it safely Removing keys on other brand keyboards (Dell's for example) is simple enough, so I'm hoping it is for a Lenovo as well.
    Thanks in advance!
    Any chance you can help a fellow x100e user out with a walk through on how you configured this in the bios? thanks in advance

  • Is it possible to find the "Sync" key in my old Firefox files ?

    I have "Backup" files from my old laptop. And there are probably 1000 or more Mozilla and Firefox files in the backup .... is there a way to merge that old information/files with my new Firefox account ?

    Do you have a folder that contains places.sqlite and a bookmarkbackups folder? If so, that should be helpful in reconstructing your settings. This article has tips on that: [[Recovering important data from an old profile]].
    Regarding the Sync key specifically, I don't know where that is stored, but perhaps you won't need it?

  • Is it possible to use the Insert Key in Illustrator?

    I have a massive block of dummy text set up in Illustrator 5 and the easiest way for me to change the dummy text is to overwrite it as one would when using the Insert function.

    PC's usually have a physical 'Insert' key located in the same space as Home / Page Up / Page Down / Delete & End. This key allows you to overwrite text as you write. Wikipedia says it best "
    The first is overtype mode, in which the cursor, when typing, overwrites any text that is present on and after its current location." < this is what I would like to be a ble to do.

  • Mapping the "fn" key to a key on an external extended keyboard

    Is it possible to map the "fn" key found on Macbooks to a key (such as the RH Control Key) on the current Apple extended keyboard?
    I use an extended keyboard with my Macbook Pro and wish to have access to the fn functions like I do on the Macbook's keyboard.
    Thanks.

    Oh my gosh I can't believe it you are right - there it is under F13 staring at me.
    I have had so many years of that being the "help" key that I didn't notice it had changed on the new aluminium keyboards.
    Thank you for pointing it out.

  • How to defer the primary key validation to commit time

    Hi
    Is it possible to defer the primary key validation to commit time? I don't know why the framework checks for the unique key constraint immediately after inserting the row and before committing it. This causes "Too many objects match the primary key oracle.jbo.Key[null]" error if the user presses the create new record button multiple times before filling and saving the previous records.
    Thanks,
    Ferez

    Dear M.Jabr,
    Many thanks for your reply. I have access to the database but I prefer to use an ADF workaround to this problem rather than a DB workaround. I am not sure but I think that there should be a way to defer or disable primary key constraint in ADF.
    Anyway, I tried to make the primary key constraint DEFERRABLE in DB using PL/SQL developer but an error occurred (the name is used by another object) which I don't know why.
    Thanks,
    Ferez

  • Too many objects match the primary key error

    Hi
    I have a detail table with a primary key consisting of 3 fields. I add a new row to the table and it is OK but when I try to add another record to the table it says that
    JBO-25013: Too many objects match the primary key oracle.jbo.Key[null 123 null]. I want to add two or more rows to the table at once and after that I fill the rows and submit the form. What should I do?
    Anyway, I am using JDev 11.1.1.4
    Thanks
    Ferez

    Hi ADF 7(!),
    Many thanks for the links. My problem is exactly the same problem mentioned by user5108636 at the bottom of the thread which is not answered yet, i.e.,
    "How do I prevent the multiple PK with null, if the user just keeps click 'CreateInsert' after 'CreateInsert' "
    Is it possible to defer the primary key validation to commit time? I don't know why the framework checks for the unique key constraint immediately after inserting the row and before committing it (I have created a new thread for this here: How to defer the primary key validation to commit time
    Maybe a workaround such as disabling the create button after pressing it and re-enabling it again after commit or rollback would work, but I do not want prohibit the user from creating multiple new rows at once, filling them all together, and committing them at the same time.
    Thanks,
    Ferez

  • Is there any way to disable the use of the "Delete" key to delete an email message?

    It's very frustrating when I hit the delete key and iCloud automatically erases the selected email message.  I receive some HTML formatted emails that include a text box that I can utilize to directly reply to something.  If I don't make any mistakes at all, I can utilize this box and post a reply.  But if I mess up and need to delete text, instead of deleting text iCloud deletes the email message.  Is there any way to disable this?
    Thanks for your help.

    I don't believe it's possible to disable the delete key, but could be wrong. However, if you delete an email in error, you can restore it by pressing cmd + Z to undo the deletion.

  • Can we generate the same key with the same password???

    Hi everyone,
    Is it at all possible to generate the same key? I have a program that takes a user password, creates a key. And this is done in a loop for 5 times. I just wanted to see if the keys that are generated will be the same for the same password. But the keys that are generated are different.
    Does anyone have any idea why this would happen?
    My Environment
    jdk1.2.2
    jce1.2.1
    My class is very simple as is as follows
    import java.security.*;
    public class SecureStuff {
    static
    Security.addProvider(new com.sun.crypto.provider.SunJCE());
    public SecureStuff()
    try {
    Key secretKey = null;
    for (int i = 0; i < 6; i++){
    javax.crypto.spec.DESedeKeySpec spec = new javax.crypto.spec.DESedeKeySpec("PASSWORDPASSWORDPASSWORD".getBytes());
    javax.crypto.SecretKeyFactory desFactory = javax.crypto.SecretKeyFactory.getInstance("DESede");
    secretKey = desFactory.generateSecret(spec);
    System.out.println("key generated:"+secretKey.getEncoded());
    } catch (Exception e){
    e.printStackTrace();
    public static void main(String[] args) {
    SecureStuff securestuff = new SecureStuff();
    The Output
    C:\> java SecureStuff
    key generated:[B@eb7989c5
    key generated:[B@e96189c5
    key generated:[B@e99589c5
    key generated:[B@e8d989c5
    key generated:[B@ef4189c5
    key generated:[B@eff589c5
    Please can anyone help me..
    Thank you very very much.
    ...geetha

    Hi,
    I was wondering if you have found a solution to your question.. I justed started working with JCE and have to implement the same functionality. basically I am trying to Encrypt passwords stored in the DB and then when a user logs in, I encrypt his password and compare with the stored password in the DB. For me to do this I have to be sure I can get the same key generated for each encryption.
    Also, do you have any examples I can look at or any recommendation on books that explain this subject (JCE) well.
    Thanks
    Chi

  • How retrieving the product key for a SQL Server 2005 installation

    Hi,
    is it possible to retrieve the product key associated to a SQL Server 2005 installation?
    If yes, how?
    Many thanks

    Hello,
    The following tool may provide you the product key for SQL Server 2005 and SQL Server 2008 instances.
    http://www.nirsoft.net/utils/product_cd_key_viewer.html
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Reverse the recon key after transferring to GL

    Dear Experts,
         Is it possible to reverse the Recon key after transferring to GL. As per my knowledge we can't reverse the recon key after transferring. If it is possible please inform to me.
    Thanks,
    Ran

    FPG8 can be used to reverse the key transfer. 

  • Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added

    Hi there,
    I recently had the following situation, where I changed the source of my CSV file in Power Query.
    Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
    But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
    But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
    This is what I get from the Call Stack
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
       at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
       at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
       at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
       at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
    I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
    If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
    Has anyone had this before and know how to fix it?
    http://www.bidn.com/blogs/guavaq

    Hi there
    I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
    Thanks
    Gilbert
    http://www.bidn.com/blogs/guavaq

  • Is it possible to display the standard function keys in screen painter

    Hi ,
    I design a screen in se51 where I use push buttons and input/output buttons and so on in the layout, here in the layout or in my final output screen(when i assign this screen to a transaction) I would like to display other standard keys, ie the function keys and application toolbar items. I would like to know whether there is a possibility to do this , if yes then how?
    In a menu painter there is a possibility where I can customize the keys or I can use the standard keys by going to se41 extras->adjust template. Is there similar possibilities in the screen painter.

    Ok I see. I should use &var.
    Edited by: xerosaburu on Aug 18, 2009 11:37 AM

  • I am unable to to upload more than one photo at a time. I have tried to hold down the shift key

    I am unable to upload more than one photo.  I have tried to hold down the shift key and highlighting the remaining photos. 

    If you are using the Internet Explorer (IE) browser than you will only be able to upload one file at a time. This is per browser design by Microsoft. If you want to upload multiple files than use another browser such as Firefox or Chrome.
    If you are not using IE and are seeing this issue then please share which OS version and browser version you are using.

Maybe you are looking for