It is possible to use ListView ,Propertypage and propertSheet in java ?

I want to use ListView ,Propertypage and propertSheet in java but cound't get
any class fo these type.
Can anybody give me sample program of how to draw
ListView Propertypage and propertSheet in java ?

My memory of MFC is pretty hazy, but I seem to recall that PropertyPage and PropertySheet are used for building tabbed panes, so the equivalent in Java would be JTabbedPane. I would also guess that JList is the equivalent of ListView.

Similar Messages

  • It is no longer possible to use ALT + N and ALT + P from the "get info" window.

    On a PC, previously, when in the "get info" windows, it was possible to use ALT + N and ALT + P to switch to the song information for the next and previous song.  Since the update to the newest iTunes, it's no longer possible.  Has anybody found a keyboard shortcut that works?  The "keyboard shortcut" thing in iTunes says you can still use ALT + N, but it doesn't seem to be working for me.  Is it working for anybody else?

    You're welcome.
    tt2

  • Is it possible to use the JS coding in webdynpro java application!!!

    Hi Experts,
    Is it possible to use the JS coding in webdynpro java application by any means?
    If yes, kindly suggest the procedure or any pointers for the same.
    Thanks in advance.
    Regards,
    Anurag

    Hi,
    I'm not an expert in this matter, but I will post here what I know:
    In NW7 releases (at least 7.01.05) it is possible to run JS, also to capture any WD Event and run your own JS code after that, using IFRAME. I have jQuery running here, it would take some time till you create a "framework" to enable some easy usage. I just want to highlight that is possible, thou I think it's a lot of effort.
    Not sure about CE7.1 it seems iFrame is deprecated. Still, being deprecated should not "block" the usage, thou it's not recommended since this functionality can be removed in next releases.
    I've read that CE7.2 has JS support, and I think you should try having a word with Armin maybe..
    Hope it helps,
    Daniel

  • Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

    I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
    Is it possible to install both Tabular and Multidimentional to same physical server?
    Is it possible that some Power View reports use tabular and others multidimentional?
    Could above requirement work in production environment? Anybody tried?
    Kenny_I

    Hi Kenny_I,
    According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
    Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
    Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
    on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
    Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
    on the environment.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Is it possible to use a CompactDAQ and NI-DAQmx in the TPC-2212 with Windows 7 Embedded System?

    Hi,
    I would like to develop a application with the TPC-2212 (Touch panel computer)  and a CompactDaq System (NI9237 - 4-Channel, ±25 mV/V, 24-Bit Simultaneous Bridge Module).
    Is it possible or I should use a panel pc?
    Thanks.
    Solved!
    Go to Solution.

    This thread is a bit old, but I thought it would be worth while responding (as I was wondering the same thing a day ago).
    The answer to the OP's concern(s) is YES, you can install DAQmx on your Windows 7 embedded TPC-2212 touch panel device while connecting to your cDAQ hardware.  YES, it will function (depending on your memory constraints).  DAQmx BASE is NOT a requirement (which, to me, seems very ambiguous if you're referring to NI's documentation for the LabVIEW Touch Panel Module).
    My confusion began when it seemed using the Touch Panel Module for the 2212 was a requirement, not an option.  If one proceeds with this assumption, then referring to the TPM documentation:
    http://www.ni.com/pdf/manuals/371940d.pdf
    NOTE: this link above is to an older version, but the content itself (also installed locally with the TPM in \\manuals\TPC_Getting_Started.pdf) remains relatively unchanged.
    Section "Installing Additional Tools" clearly states "You must install additional tools on the target depending on the functionality you need."  Immediately following is the installation procedures for DAQmx Base.  You'll see the same statement in the LabVIEW help files that get installed with the TPM on your development machine.  Nowhere does it state, for Windows Embedded, that it's possible to use DAQmx itself.
    Because DAQmx is a bit of a heavy weight, you'll probably want to go with the Runtime (with MAX) as I did:
    Search for 'NI DAQmx Run-Time Engine - Configuration with MAX'.  I would have posted a link, but NI's site was down for maintenance at the time of this post.
    Connect to your 2212 over a network connection (I just used a cross over cable and connected directly).  Create a shared directory and copy the downloaded installer on over - install.  You could, of course, download direct if your 2212 is already networked with web access.
    I have my test station application running beautifully with an attached (USB) cDAQ chassis loaded with a variety of modules.
    I hope this post is as useful for somebody else as it would have been for me. 
    -Chris
    Kod Integrations, LLC
    Sr Software and Automation Engineer
    Certified LabVIEW Architect
    Kod Integrations, LLC
    http://www.kodintegrations.com

  • 975X PowerUp - Possible to use Intel Raid and JMicron Controller?

    Hi,
    as you can see I've got an MSI 975X PowerUp Edition with Bios 7.7.
    Because of many problems I had with earlier Bios version I've got completely disabled the JMicron controller in the Bios.
    I'm running 4 HDDs at the Intel controller while using 2x Raid0.
    Is it now possible to use the JMicron at the same time?
    I would like to add a fifth SATA HDD at the JMicron controller and aybe an old IDE HDD also on the JMicron controller. So, is it possible?

    Quote from: carrera1988 on 19-January-08, 18:48:17
    Sorry, didn't found that thread.
    I've tried it now with an fifth Sata HDD, works perfekly until now. I'm formating the new HDD at the moment...
    What's the best way to shut down the Intel controller WITHOUT the risk of loosing data?
    I want that oly the new HDD is detected so I can use her for testing purposes...
    If only for testing purposes, why did you leave raid connected........? Especially, if planning to alter boot sequence......
    I turn off computer and unplug disks, when I am doing testing of HD's......... that way data is safe. You have to setup bios again after testing but only takes a few mins or 10 mins if you have written down settings

  • Is delegation of a calendar possible on using Office 365 and any client whatsoever on Mac?

    I am looking for any way for OS X users to use Office 365's exchange calendaring service to delegate / share a calendar with another user on Office 365.
    I have researched the MS knowledge base which states that for delegation, you need both an Exchange server (which I presume Office 365 is) and either Outlook 2010 or 2013 - neither of which run on OS X. If I have to, I could get to these software to temporarily
    sign in and set up the delegation, but I don't want to run Windows day in and day out and need a native OS X solution.
    Short of running Windows virtually day to day, can OS X users use delegation features of Office 365?

    I am looking for any way for OS X users to use Office 365's exchange calendaring service to delegate / share a calendar with another user on Office 365.
    This article should help:
    https://support.office.com/en-gb/article/Add-and-manage-your-delegates-e250ea79-755d-463f-a506-31f55092338b
    But... I'd expect that this will only work if both the mailboxes are within the same O365 tenant (since delegation is really a backend-server feature, which requires a common security/directory, and that's only possible within a single tenant, and not across
    tenants AFAIK)
    For the hosted/webservice aspects of O365, the dedicated O365 forums are best:
    http://community.office365.com/en-us/f/default.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Possible to use Airport Extr and Express for WIRED Guest Network?

    Situation and landscape:
    My house has a Comcast cable-modem, which is connected to an Airport Extreme (AEx).
    The AEx is running WPA WiFi, and this is all good.
    There is one ethernet wire running out of the AEx, which goes 150 feet to the rear of my house, across a short corridor (protected from weather with insulated pipe) and into my garage apartment, where it terminates into an Airport Express (APress.)   This garage apartment is frequently used as part of a rental property.  The APress is extending the same WiFi SSID/settings.
    When guests arrive, they are able to plug-in their notebook computers to the APress ethernet port, or use the WiFi.
    Well, the problem with that, obviously, is that they can "see" the other computers on the network, and printers, etc.
    It would be perfect to set configure the AEx and APress to the WiFi "guest network."  However, there are problems with this:
    1)  Believe it or not, many guests still use direct-plug and do not have nor know how to set up their WiFi -- so they MUST have a direct ethernet wire.
    2)  When I use Airport Utility for the APress, it does not show any WiFi guest network option -- maybe because another dependent setting is not allowing this (i.e. Bridge Mode?")
    3)  The distance between the AEx and this garage apartment is too long between them to shoot a WiFi guest network from AEx and to be picked-up by the Airport Express... and there's a center core in my old house that is impervious to all radio frequencies and could block a nuclear blast.  Well, it causes a degradation of wireless.   And this brings us back to #1 above...in that I need a cable ethernet option.
    Picture attached of current landscape:
    So, maybe....
    I've spent the better part of a couple of hours searching here, particularly for the terms "access point" but the terminology isn't what I need.  What I wonder if perhaps I need to place an APress beside the AEx, turn on Guest Network at the AEx, then "pick it up" with a second APress, and carry the ethernet signal to the garage apartment and allow guest WiFi and wired.  (see second picture)   Will this work?

    OK, here how to set this up.
    Open up AirPort Utility 5.6.1, select the Express, and click Manual Setup
    Click the Wireless tab located below the icons
    If you want the Guest Network to have a different SSID (recommended), then change the name of the wireless network, adjust the security settings if needed, and change the Wireless Password and Verify
    Click the Internet icon up at the top of the window
    Click the Internet Connection tab just below the icons
    Change the setting for Connection Sharing to Share a public IP address
    Click the DHCP tab located under the icons
    Change the DHCP Beginning Address to read something different.....like 10.0.5.2
    Click Update and give the Express a full minute to restart
    At this point, the Express indicator light will be slowly blinking amber
    Open up AirPort Utility again, select the Express and click directly on the word Status (2nd line)
    You should see a Double NAT notice with an option to "ignore" the item
    There may also be an Setup over WAN notice with an option to "ignore" the item
    Click in the boxes to ignore both items, then click Update again and the Express will restart and display a green light
    Try things out to verify that the Guest Network cannot "see" any devices on the main network...and vice versa.

  • Is it possible to use an Audigy and Xfi at the same ti

    Hello, this is my first post in the forums.
    I have using Creative soundcards since many years ago, and all of them are working today.
    Now, in my primary there is an Audigy, mainly used with Debian Linux, working wondefully, and some Windows time for games.
    I'd like to use a Xfi, but the promised Linux compatibility is still on the horizon, so, is it possible to install a Xfi along my Audigy, using only the Audigy in Linux and the two soundcards on Windows (Xfi with headphones and Audigy with surround system Creative P580)?
    Will there be a driver conflict of some sort (in Windows) ?

    I'm running into the same problem. While it is possible to create an aggregate device using Apple's Audio MIDI setup utility, the Mac doesn't see both microphones. It only ever sees the second one that's plugged in.

  • Is it possible to use both thumbnails and swipe in a multistate?

    I'm producing a document for iPad using the Digital Publishing beta, and I've set up a multistate slideshow, navigable by thumbnail images. I enabled the swipe advance, and now the thumbnails don't work. Is it possible to have both, or does one cancel out the other? Thanks!

    Oops
    It's looks like impossible
    http://www.unicode.org/unicode/faq/font_keyboard.html#2

  • Possible to Use Radeon 4870 AND EVGA NVIDIA GTX 285 at the Same Time?

    Hello,
    I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
    The second display maxes out at 1280 x 800 resolution.
    I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
    To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
    Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the Nvidia? Can I even install both at the same time? Or should I remove the Radeon and use just the Nvidia?
    FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
    I would appreciate any and all help on this!
    Thanks!
    Charles

    I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
    Are you using the Mini DisplayPort to Dual-Link DVI Adapter?
    <http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0Mg>
    The second display maxes out at 1280 x 800 resolution.
    That's the resolution the 30" will run at with a single-link DVI connection.
    I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
    It depends on the adapter you use.
    To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
    It has twice the graphics memory, so may be better if you are processing lots of large images at once.
    Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the NVIDIA?
    No. For only two displays, one card is better because it can handle moving windows between displays, or windows spanning both displays. With the displays on different cards, the main computer has to do more work. Even if the windows are never going to cross display boundaries, there is no way for the applications to know that, so they won't let the graphics cards do as much as they could.
    Can I even install both at the same time?
    No. There are only two auxiliary power connectors, and one card will use both.
    Or should I remove the Radeon and use just the NVIDIA?
    Try each card and see which gives the best results with your applications.
    FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
    The extra video RAM may give better performance with lors of large images.

  • Possible to use both PowerPC and Intel-based systems together with Qmaster?

    Hello,
    New to the Qmaster setup, I was wondering if it was possible to set up a Qmaster cluster mixing PowerPC and Intel-based systems. If it is possible, what version of Qmaster would support this type of cluster?

    While it can work, note that if there is huge difference is processing speed, the PPC machine can actually slow down the process as everything waits for it to finish it's instance and copy it back.
    It's worth a try but keep an eye on how the various computers perform.
    Have fun.
    x

  • Possible to use Audio In and Out simultaneously?

    Is there any additional adaptor/gadget that I can purchase so that both the Audio In and Out features of the audio jack can be simultaneously?
    For example, so that Audio In can be used to record an external source input while the Audio Out is piped to a headphone to monitor the recording?
    Thanks!

    Air has a headset jack.
    You can use a splitter
    Mics should be USB capable for best results, almost all headset mics are junk quality.
    then monitoring or listening thru the headphones
    consider using a PRO MIC , such as an Audio Technica AT2020 USB
    http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
    or better still use one of these with pro XLR mics:
    http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

  • So if I back up my iPhone 4, will it be possible to use that backup and transfer it to my iPhone 5?

    That should work right? So I'll have my same contacts and such?

    It is possible, although icloud will work more smoothly.

  • HT4587 Is it possible to use AirPort Express and wired speakers simultaneously?

    While playing music via AirPort Express for AirPlay and iTunes can I additionally play the same music through a speaker wired directly (through the 3.5mm jack) from my iMac?

    Ok so the answer is in itunes help all the time! I was directed to - Itunes Help - Listen and Watch - Choose Speakers. Thanks to the guys at Western Computers Cirencester for their help. All now setup.

Maybe you are looking for

  • XA Exception while invoking the Web Service

    I'm getting the following exception frequently while invoking the webservice hosted in OC4J: -4972682009633467115com.evermind.server.rmi.OrionRemoteException: Transaction was rolled back: Error in transaction: javax.transaction.xa.XAException: Commit

  • Want to send a text in BOLD via email

    Hi all, I want to send a text in BOLD via email, Right now i ma using the Function Module: SO_NEW_DOCUMENT_ATT_SEND_API1 for sending attachments via mail. But i do not know how i can send some text in BOLD. <b>****NOTE: I want the text in BOLD is in

  • ICF error in Adobe Interactive in WebDynpro

    I am using a Adobe Interactive in Web Dynpro for ABAP application. I can see the adobe interactive control if I dont set the enabled property of the Interactive form. But if I set the enabled property of the interactive form and start the application

  • BOOTCAMP! Restarted into XP and now there's no sound.

    Hey, Recently started using bootcamp and have successfully managed to restart into Windows XP. Although since then I have stumbled upon many problems, first I had a lot of problems with my microphone (my voice sounds distorted and very very strange).

  • Useradd on rc.sysinit error [solved]

    i am trying to execute "useradd" on rc.sysinit to allow dynamic user creation on startup for the Archie Live project and im getting "unable to lock password file". trying to execute the same command after login works fine. i checked for no /etc/passw