It it possible to have info on the left and right sides of iweb templates?

When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

Hi
You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

Similar Messages

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

    I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

    You can use this extension to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • Why does iphoto want to chop off the left and right sides of the photo I'm trying to print?

    Trying to print a group photo.  Using the borderless setting, I still always lose half of the persons at the end of the rows.  Why won't iphoto allow me to print the entire picture?

    It actuallyhelps if you provide details including version of iPhoto and of the OS and what you are doing
    with absolutely nothing but a problem my guess is that the print size is a different ratio than the photos size so somehting has to be left off - for example you can not print an 8x10 photo on a 4x5 piect of paper - depending on the camera you have your photos are either in a 3:2 ratio or a 4:3 ratio - the paper must be the same - or you must crop the photos to the paper size - or you must go to the customize screen and right click on the preview and fit to frame
    onc eyou provide basic information more specific help can be provided
    LN

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • Vibration to the Left and Right of Trackpad?

    I want to know if it's normal for the macbook to have vibration to the left and right of the trackpad. Thanks in advance.

    It's not isolated and the vibrations transfer through the case.
    If I put my hand on the top of the lid I can feel them there as well. Very slight and nothing to be worried about, but there nonetheless.

  • Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)

    Information all in the title.  I open a .ai file and the left and right sides of the image are cut-off based on the "page" box

    Did you open it in a lower version?
    It looks like you opened the PDF part of the file instead of the AI part.

  • How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

    I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

    myocom,
    You can highlight random points in DIAdem as well. 
    Here is an example:
    Use the cursor to move to the point you wish to highlight.
    Press the "Set Data Point and Flag" icon on each data point you wish to highlight
    When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
    I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
    The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
    I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
        Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Report with highlights.zip ‏5 KB

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • Thunderbolt has 2" blank border on the left and right edges.

    When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge.  How do I size the screen to fill up the entire display?

    Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

    After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700. 
    now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about  700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
    The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

    Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

  • I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

    I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

    Just press F11 on your keyboard to exit full screen mode.

Maybe you are looking for

  • Open order Quantity to appear in Order

    Hi gurus,        I hav a requirement that for example,I raised an order for 100 Qty and delivered 80 materials 20 is open,So when i raise an order for the same material for 50 Quantity,I need to get POP up box saying that 20 qTY IS OPEN. I know in av

  • Transfer playlists and content from iPod Touch to new computer

    I was trying to search for old answers on this topic, but instead the system is forcing me to create a new post.  My old laptop crashed, and the backup I had of my iTunes was outdated.  I have more current music and playlists on my iPod Touch than ar

  • Problem in FM

    Hi, I have created a Function Module, and from the function module i am calling a report program thru "SUBMIT" command. now in the 'submit' command i add the addition 'exporting list to memory and return'. after that i read the contents of the list u

  • The option to sync calendars/contacts has diapered from my iTunes. Help?

    Upgraded to 10.9.2 last week. Now when i go to iTunes, the option to sync my calendar and contacts is nowhere to be found. there is a sync button, but it only syncs browser data, apps, etc. My outlook stuff is not syncing with iCal, even though it's

  • JTable sorting when clicked on header

    In my JTable when clickedon JTable header of a column it doesn't get sorted. how do I make sort when clicked on hearder column? Thanks.