It it possible to look for a page that does not contain a string?

Is it possible in the search feature in Dreamweaver CS3 to find all pages that do NOT contain a specific string?

I don't think so, at least not directly. I could be wrong, Regular Expressions can be pretty powerful, I'm not sure how well they're implemented in CS3 though: http://www.adobe.com/devnet/dreamweaver/articles/regular_expressions_pt1.edu.html
Maybe you could do a find/replace of that specific string, with itself.
All of the files that have it would be updated without actually changing the code.
The Date Modified for the file would change though.
The files without the string of info you are looking for would have the old modification date.

Similar Messages

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

Looking for a terminal that does not truncate lines when resized

I am a huge fan of tiling window managers in general and have used dwm exclusively for over a year now. One thing that drives me crazy though is that when I switch a terminal window from being the primary window to a secondary and then back again, all of the lines are truncated to the smaller width. If I am watching a log file for example, this makes the previous output totally unreadable. Does anyone have a solution for this? Is there a way to make the terminal not truncate the lines if resized to a smaller width?
Thanks!

Try
https://bbs.archlinux.org/viewtopic.php?pid=548267
http://tomayko.com/writings/StupidShellTricks

How to create an OAF page that does not need login to access

We have a lot of Oracle users, and everyday there are some users forget there username or password and need reset. I really want to use a web page to let them reset their passwords automatically. The web page will call the API to reset password if it found the user request is legible.
So based on the situation, the users should not need a login to get to this page, can I do this using OAF?
And idea is welcome, thank you for your help!
-Bill
Edited by: billzheng2004 on Jun 18, 2009 12:12 PM

Srini,
Thank you for your response, I think we need to go back to my original question, is it possible to create an OAF page that does not need login, how can I do that.
I think I said too much and led us to go to a different direction I did't want to. But I am still glad to texplain why I need a custom password reset process, that is all about business requirement, here it is:
----I am not sure that "company issues" (such as what you described) can be solved by software -
I already have a solution for that. Create a custom OAF page, ask user to input his SSN / Date of Birth.... then I can figure out what his real username easily. And I can reset his password as his SSN or something which only this particular user knows. Then he can login.
----you may have to impart training to end users.
As I mentioned, most of our users use only Benefit self service. They only login several times a year, even they are trained this year, most of them will forget next year, this is just human nature. And because the nature of our business, thousands of employees may change at the end of a year. It does not make any business sense for company to prepare trainers every year.
----In any case, the functionality you require is already built into the product.
I guess the reason most companies hire Oracle Developers is that some functionality Oracle Applications provide is not exactly the companies needed. When there is Oracle Apps product, there is alway customization.

Javascript to create bookmark for page that does not exist yet

Hello all,
Is there a way to write js for a bookmark that goes to a page that does not currently exist?
For example, I have a 20 page pdf document. We have FileMaker Pro that can 'append' to a PDF additional pages. So when FileMaker pro appends two new pages (bringing us up to 22 pages), I'd like to have 2 'existing' bookmarks in the original 20 page pdf document that will, when clicked, go to page 21 and 22 respectfully.
Is this possible and would anyone have the JS I would put into that bookmark?
Thank you in advance!!

Here's what I posted in the other forum you posted this to, in case it might help someone here:
The JavaScript would be:
// Go to page 21
pageNum = 20;
If there are fewer than 21 pages, it will go to the last page. If you want to avoid this, you could do something like:
// Go to page 21 if there are at least 21 pages
if (numPages > 20) pageNum = 20;

How to redirect a page that does not exist

Hello everyone. Thanks for the feedback so far.
I am editing an old site and there are going to be some pages that do not exist anymore.
Is there a way to have an automatic redirect so that if any user types in ANY page that does not exist sitewide, they can be directed to another main redirection page which displays a message and then to the main page again?
The current site is littered with empty pages with a redirect link on each at the moment which does not look good and it's awful to maintain as these non-meaningful filenames the original developer has used are no help at all.
Thank you in advance for all feedback
Terry

What is the web address of the old site?
If it's on a Linux server then you can use .htaccess rewrites to automate much of the redirection heavy lifting
http://kb.mediatemple.net/questions/85/Using+.htaccess+rewrite+rules#gs
https://my.bluehost.com/cgi/help/htaccess_redirect

Creating a page that does not exist

Hi everyone,
Is it possible to create a page that does not exist based on the user input?
By does not exist I mean that it is not stored in your computer and JSP will generate the page based on the user input. For example, in forums the user can create a new topic and based on the options selected a page will be created and stored that was not present before. The same thing happens when a message has a large number of replies, in which a new page will be created and attached to the previous page. I hope that I am not misunderstanding the concept of creating pages in forums.
Any help is greatly appreciated.
Regards,
Basil Mahdi

Hi,
what happens in the forums is that you type in a message and that message is stored in a database. Along with your message the number of thread, forum number and message number is stored. Next time somebody wants to read your message, this message is taken from the db and shown to you by the jsp. The JSP ofcourse does more thant taht it shows also other messages and static HTML.
http://galileo.spaceports.com/~ibidris/

When I click on purchase book, i get message "Incomplete Book. Your book seems to have frames on one or more pages that do not contain photos." I have checked the page layouts several times and no missing seem to be missing.

when I click on purchase book, i get message "Incomplete Book. Your book seems to have frames on one or more pages that do not contain photos." I have checked the page layouts several times and no missing seem to be missing. Any suggestion? page layouts and number of photos are consistent. several pages are identified as custom, as a result of captions added to several photos. I'm using a macpro and iphoto11.

There is one or more missing photo - typically a page background requiring a photo that is hidden behind a layout with photos in it - look through every page for that - any page tha thas a grey background rather than color is a problem - and it ccan be behind a full page photo so you have to check the page background rather than just look at the page
LN

How do I create an executable for a computer that does not have IVI drivers

I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
Thank you,
Zach Oberman

Zach,
Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
You may be able to obtain a traditional LabVIEW driver from
Tektronix
Developer Exchange
Requesting a
driver
Other Resources
Thanks,
--Bankim

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the

I've become increasingly frustrated with the ipad adobe app. I've subscribed to be able to convert my pdf files into word documents and it has yet to work I've paid for a service that does not work which in turn makes me a disgruntled customer to say the least very disappointed with such horrible service

Which service did you subscribe to? Adobe PDF Pack?
Once I know the service that you subscribed to, I can move this post to the right forum so that you can get in touch with the folks who can assist you.

R1: tcAPIException: Duplicate schedule item for a task that does not allow multiples.

Hi,
I'm struggling with the following task:
I have to assure an account exists for a given resource. I do provision it with the .tcUserOperationsIntf.provisionObject().
I've created a createUser task to create the account.
The task code checks if there is already matching account.
If no account exists, is is created in the disabled state, and the object state of OIM account is set to 'Disabled' by means of task return code mapping.
If it exists, it is 'linked' to OIM account.
The problem is if the existing account is enabled, I have to change the OIM account state to 'Enabled' either.
To implement this (thanks, Kevin Pinski https://forums.oracle.com/thread/2564011 )) I've created an additional task 'Switch Enable' which is triggered by a special task return code. This task always succeeds, and its only side effect is switching the object status to 'Enabled'.
By I've getting the 'Duplicate schedule item for a task that does not allow multiples' exception constantly:
This is the stack trace:
Thor.API.Exceptions.tcAPIException: Duplicate schedule item for a task that does not allow multiples.\
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2925)\
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2666)\
at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)\
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)\
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)\
at java.lang.reflect.Method.invoke(Method.java:601)\
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)\
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)\
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)\
...skipped
at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)\
... skipped
What did I wrong?
Regards,
Vladimir

Hi Vladimir,
Please select 'Allow Multiple Instance' checkbox for the process task.
Thanks,
Pallavi

How do I download Adobe Flash Player for a computer that does not have internet?

How do I download Adobe Flash Player for a computer that does not have internet?

Hello Walter,
that's it, usually you get and Adobe Flash Player Installer only. For a distribution in a company, or an installation on a PC without internet access, Adobe has available an offline installer. This installer you don't need to uncompress it first. You can download the installation file from there (you must logged in with your Adobe ID): http://www.adobe.com/products/flashplayer/distribution3.html
Hans-Günter

TS1702 HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

HOW TO CANCEL AN SUBSCRITION FOR AN APPLICATION THAT DOES NOT WORK

Please stop SHOUTING at us.
http://support.apple.com/kb/ht4098

I'm trying to order album and I'm getting this message:Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.

I'm trying to order an album and I'm getting this message:
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
As far as I can see I have placed pictures on all the pages. I admit that on some pages I could have placed 3 or 4 pictures but I chose to use ony one or two. Could that be the problem?

Yes -
Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book.
The error seems pretty clear - you must have a photo in evey photo frame in order to place your order - so you must either change the layout (if you only want one photo on a page then use a layout with one photo) or put photos in the spots you have not filled
LN

It it possible to look for a page that does not contain a string?

Similar Messages

Maybe you are looking for