It keeps asking if i want to turn on air plane mode after cleaning it...
HELP!!! I cleaned my phone tonight with a damp wash cloth, it 'wasn't' soaking wet either. And i had it cut off too, i just wipped it down , and i believe a little bit of water went into the speakers below or something, now it's asking me if i want to turn on air plane mode and something about this feature doesn't work with iphone, and also to do something with audio interference, and that i will not be able to make or recive calls. But i dont get it, i turned it off, reset the network settings, i can still hear everything very good, text messages and calls go out and recive when i choose not to do air plane mode, i hear every tone thats suppose to work, the only thing is that message keeps popping up every few minutes when its on standby, home screen, and after i cut it back on. I really hope i didnt mess it up because everything works and i just was trying to wip it down a little before i went to bed, i've only had it 3 months and just trying to keep it clean. I just want that message to stop, if i do that air plane mode nothing will come in....i'm scared
Actually it is fully exposed to the air and just about all cell phones use this methood. It pretty much just a sticker and requires a lot more than just "moisture". Most phones open the battery cover and look for the white dot. It turns red if the phone ever got wet (a good drop in a puddle, toilet, pool, etc).
For the iPhone, look down the headjack (best if done with screen on as it lights up some). You will see white dot at bottom. It turns red if phone gets wet.
Just cleaning the phone should never set it off unless cloth was wet enough that droplets of water can fall from cloth and down the headjack.
Though sounds like the OP just messed up the connections on the dock as you are not supposed to get them wet. I would just take it to store (with appointment) and not worry about talking about getting it wet.
Similar Messages
-
I really need help! also, if there is any other way i can just use wifi without being charged AT ALL would be great
iOS: Understanding airplane mode
-
When trying to use FaceTime I can't because it says it is turned off in settings, it then ask do I want to turn it on , tap for yes and it sits there spinning. Face time is on in settings?
Have you tried signing out of your Apple ID, restart the iPad and then start all over again?
Go to Settings>iTunes & App Stores>Apple ID. Tap the ID and sign out. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Then go back to Settings>iTunes & App Stores>Apple ID. Sign in again. Then go to Settings>FaceTime>On. See if it will stay turned on and it it does, sign in and setup. -
My iCloud keeps asking me for a password even when I enter it, it still keeps asking. I have tried turning it off but it doesn't work. It is really annoying!!
Please help me!! (The same thing happened on this device and when I reset it, it worked....why isn't my iPad 3rd gen. Working...?)Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Had to replace battery, which wiped out everything. Backed up from the cloud, but when I hook to computer, won't sync. Keeps asking if I want to re-store the phone.
Ideas?no apple store replaced. they said there were 3 apple programs that kept crashing in background, which ran battery down cause they kept trying to re-load.
they backed up phone to cloud, wiped out old software and replaced new software & new battery. since then won't sync with itunes on computer. -
My macbook keeps asking if I want to shut down, restart, etc...
It just started, but my macbook keeps asking if I want to shut down, restart, etc...
I've tried all the resetting advice I see online but nothing works...
I have a macbook 2.1/Intel Core Duo - 4GB - 10.6.8My MacBook just recently today starts to ask me to shutdown/sleep/restart etc after 1 minute of idling. I've reset the SMC twice to no avail. I checked my power settings and everything else and nothing is out of the ordinary. I've looked online and other people have experienced similar problems. Just wondering if anyone have found a solution to this?
-
I have just bought the whatsapp messenger for my i phone 4s but the screen is now frozen and the message keeps coming up to ask if I want to buy or cancel??? Help.
Terry,
Plug your iPhone 5 into your Leopard Machine.
Fire up iPhoto.
The phone should become available in iPhoto, and then you can import the camera roll.
-Alan. -
ITunes keeps asking if I want to replace app with one I'm moving
Every time I open iTunes (or do anything with my apps) it keeps telling me a newer version of an app already exists in my library and am I sure I want to replace it with the one I'm moving. Only, I don't think I'm moving any apps, and no matter what I choose it keeps asking every time I open iTunes, and goes through at least half my apps every time.
I've tried updating the apps, updating iTunes, but nothing seems to work.Ok I had this problem earlier due to me attempting to move my iTunes library from one computer to a newer one. If that is what you did before receiving the message then you must go into the iTunes folder on your computer, it should be under music in your computer. After that go to iTunes media and find the Mobile applications folder it should be empty, Open another folder and go to Tunes media then look for the folder titled "Automatically add to Tunes" find the mobile applications folder in their ( Should have a iTunes media folder within that folder and the mobile applications is located in their) The apps in this folder are being continuously re added to your media so simply copy all of the apps here and move it to the first mobile applications folder.
However if you switching to a new computer is not the case then you could always also delete all the apps within the original mobile applications folder like how it is stated in this discussion.
A newer version of the app '...' already exists... -
Just installed CC 2014. It shows in my Start menu with the install shield. Whenever I attempt to open CC 2014, I get a dialogue box asking if I want to allow the program to make changes to the computer. I have uninstalled and reinstalled and can't get it to go away.
This would only happen if you never installed it with sufficient administrative privileges and the user permissions are not set correctly. therefore reinstall it as admin.
Mylenium -
Apps keep asking for cellular to be turned on
I went to settings on my iphone and turned off cellular for anything where it wasn't critical - yet nearly every time I run some apps, the app keeps popping up a message suggesting I turn it on. Very annoying. Is this normal behavior or is there some solution?
Guess it is unavoidable since no one has given any way to solve this. But it seems like a bad system to me. I could see asking temporarily - in case someone made a mistake in turning it off. But it happens way to much. Maybe a good solution would be to let an app ask you the first time it is launched and this option has been turned off. But then not ask you again until at least the next day. And then wait a week. Then two. then not more than once a month. I'd like to eventually not ask at all, but it should at least do something like this.
-
My ipod touch keeps freezing and doesnt want to turn on anymore.
i have a 32gb 4th generation ipod touch, it stopped working properly like 2 weeks ago. It stopped functioning right when the home button didnt go as smooth. I had to press it really hard to go from one app to the home screen. if i pressed it twice to change music, it would turn negative color. i turned that off but the button kept acting the same. it is fustrating. ive tried turning it off then back on but it doesnt change and today while in an app it froze completely. i held the power and home button to reset it, although it was hard, it turned off. while trying to turn it back on, it froze on the black screen with the apple in the middle. is there anyway i can fix it or what can i do?
i need help its very fustrating and it keeps turning on and off by itself on the black screen with the apple for over 10 minutes.
ive only had it for 5 months. please help!This also happened to me when I did the jailbreak and restored, he caught the apple in the middle of the screen and spent four monthswithout knowing what to do, I called support and found it was onlyTIGHTEN THE BUTTON UP, HOLD AND PRESS THE BUTTONAND HOME HOLD BOTH, then the image will appear to connectthe pc, when you will connect to iTunes and a message that youriPod disendo is in recovery mode, then just restore it and hope itreturns to normal. Hope this helps everyone.
Ps: I do not speak English and I'm translating this message forgoogle, so sorry for the mistakes grammarians. -
I have tried changing the permissions for my hard drive/Account and all files below it but this prevented my Mac from starting; hence, I keep reinstalling the OSX (this is why I am currently on 10.6.4 instead of 10.6.6).
Additionally, even though I keep uninstalling Firefox (throw away the icon and get rid of "org....plist" (except in one user account in which I am not allowed to trash)) the icon always appears in my Dock when I startup (it is a icon with a slashed circle on top of it).Try doing a clean install.
# Download the Firefox installer from http://www.mozilla.com
# Trash the current Firefox application
# Now try installing the new version of Firefox ([[Installing Firefox on Mac]])
Doing the above will not remove your user data, that is stored elsewhere in the [[profiles|profile folder]], though if you wish you can back that up first
If you are still having problems with privileges see [http://support.apple.com/kb/HT2963?viewlocale=en_US troubleshooting permissions issues in Mac OS X] -
Visio Pro 2013 keeps asking if I want to install Pro or Standard. OCT Admin File
I have created an Admin file to install Visio 2013 Pro. When I run SETUP.EXE it prompts to select either PRO or STANDARD. I only want it to install Pro without prompting the user. This is for an automated install. I am using KMS.
How can I force it to install PRO every time?
Thanks.Try to run configuration.xml file to define the Visio 2013 Pro setup.
http://technet.microsoft.com/en-us/library/jj219426(v=office.15).aspx
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
I have installed and restarted as the update window tells me to but the message keeps popping up EVERY day! I've done it over 6 times already... why does it keep coming up? How can I stop it?
HI,
Which Mac OS X do you have installed?
Your forum profile: Mac OS X (10.0.x) ??????
Carolyn -
Lost iPad and want to turn off 3G plan
Sadly I have lost my iPad and have no way to track it. I am paying for a 3G plan that has automatic renewal. How do I cancel that without the iPad to do it on?
Contact your carrier.
Maybe you are looking for
-
Gnome-shell crashes with my new video card (nvidia 450 GTS)
Trying to use nouveau w/ gnome-shell and a new 450 GTS. Firstly, gnome-shell enters fallback mode upon login. Secondly, whenever I try to open a shell or a program such as firefox, gnome fallback mode crashes me back to gdm. I'm not sure what to p
-
How can I sync my Ipod Touch 4th Gen calendar with my comcast caledar on my computer?
Can anyone tell me how to sync my Ipod Touch 4th Gen calendar with the calendar on my Comcast email system?
-
Vertically Align to center of text box
I have a project that has 500+ Peices and each one consists of a 1 of three logos and 1 of 500+ lines of text and all the lines of text are different lengths I am using data sets and variables.xml to create them all quickly. Now the problem I am havi
-
Error publishing plsql webservice (xml schema mapping and/or serializer)
Hi guys, I'm with a problem when publishing plsql webservices from JDeveloper 11. The scenario is something like this: 1) I have a connection with a database 9i, and the objects (packages, object types, etc) are all in there. 2) In this case, i can p
-
Error while executing FP_TEST_IA_01
Hi, We are going to configure ADS on NW07 SP12 system. all configuration are according to ADS configuration document. following test are passed according to note 944221 FP_PDF_TEST_00 FP_TEST_00 FP_CHECK_DESTINATION_SERVICE but while testing FP_TEST_