It needs to be REAL TIME!

It seems that no matter what I do in Bridge it takes anywhere from 1-2 seconds before it "responds". In a production environment, this is unacceptable. Navigating, drag/dropping, previewing and opening of files/folders should all be "instant".

I cannot over emphasize how essential this is to a working photographer. I wonder sometimes if the Bridge develoment team ever actually uses this application in a working production environment.
If you cannot implement a feature with "snap" DON'T IMPLEMENT THE FEATURE.

Similar Messages

Need Suggestion On Real Time Data Accees

Hi,
Our application (let say A) runs on * 8.1.7.4.0*
Another Application (let say B) runs on *10.2.0.4.0*
Both the application A and B exchange data through DB links.
Both the application A and B perform select and DML on other tables.
Application A has views (approx. 10 views) on application B 's table through DB links.
Application B also has views (approx. 50 views) on application A 's table through DB links.
Application A has store procedure (approx 10 SPs) through which it does insert/update on two of application B 's table approx 15K call of that procedure per day.
Application B also calls some of the application A 's procedure to insert/update data in application A 's table.
Currently both the application's data center are at the same place. But, there is a proposal/need to move application B's data center far away from the current location. Because of these we are in a assumption that DB Link over WAN will create performance issue and searching of probable replacement.
After of couple of discussion we have identified approx five application A 's tables which are frequently accessed by application B and expect real time data.
Similarly, Application A expect real time data from two application B 's table.
'Golden Gate' mechanism came in our discussion, butt it's expensive,
Can we replace this store procedure code/dml with web service call or so ??
Can anyone suggest ... what kind of approach we should take here ?

Views which are residing in application A 's side use many internal tables and one or two application B s table.
I don't have idea on 'multi-master replication ' ... is it two way replication ..? ... you aware of any documentation I can refer ..? How costly it is (if you can give an idea) ?
Also, among many tables we need near real time (2 mins interval) replication on 5 tables.
MVs again have dependencies on DB link, which exactly what are trying to replace (assuming performance issue)
With fast refresh (let say 2 minutes interval) method on MVs do you think it could cause performance issue specially when data center are at different location ?

Help needed with CVI real time

Hi,
I am new to CVI real time and need help related to this. I will explain my scenario:
1. I have few configuration files (INI). Need to validate the files (range checking..etc) during start of the application.
2. When user clicks "START" in the user interface on the host machine, I need to generate outputs (analogs/discretes...) based on the settings in the config file and read some inputs from other instruments. ( I/O tasks like generating outputs/reading inputs i am planning to perform in RT side)
3. From the user interface, user can also change the config files. if user changes the files, again file validation needs to be performed. After changing the files, if user clicks START, need to take the newly enetered config files to perfom I/O tasks.
4. I am NOT using reflective memory for my application.
I am confused in the following area:
1. File validation during startup , do i have to perform on both host and RT side?????
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
Please guide me. Any help would be highly appreciated.
Regards,
haari
Solved!
Go to Solution.

Hey haari,
1. File validation during startup , do I have to perform on both host and RT side?????
This depends on the full range of responsibility for the INI files. If they are all needed simply to change what the I/O tasks are for, then you would technically only need to validate the INI file contents on the RT side. You could, however, validate on both sides if you wanted to. However, I would probably set it up such that I send a validation command to the target, have the target run a component of the code that validates the INI contents based on how I instructed it, and then return a message that says whether or not it met the requirements I specified. However, if you are concerned with offloading that process to the user desktop (instead weighing down the RT controller performance), you could FTP the file off of the controller and perform the validation process on the host side.
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
You can send them to the target over FTP. This can be done programmatically, through MAX, command window, or a Web browser.
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
This is basically addressed in answer to question two. You would not need another structure in your RT code to handle the FTP receive component as this is handled by the FTP Client/Server communication. However, in the event that you successfully FTP a file to the target, you should likely send a message from the host to the target so that the target can respond accordingly and reload the file, reestablish the I/O values, run an idle procedure, or do whatever you like.
Hope this helps. Have a great day!
Tim A.
National Instruments

Help needed in getting real time system performance monitor

Hi,
I need a real time system performance monitor for my solaris.
i am able to graph system usage graph on a daily/weely basis using the ksar grapher.
In the same way i need to capture the system utilisation real time to be viewed on a webpage. Please let me know if there are any free tool/scripts capable of doing it.

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

Need SD,MM real time scenarios

hi everyone, Plz help me with SD real time scenarios with examples..
regards,
prashanth

Business scenario that has to be mapped by you (SD consultant) -
Company / client is a TV manufacturing company which sells TVs and provides TV repair sevices.
1. Sales orders for both (TV selling & services) must be done in one sales document type
2. Delivery type must be set up ONLY for TV selling (as services do not need any delivery of goods!)
3. For easy identification - bills should have different number ranges. For selling TV bill # must range from 1 to 1000, and for TV services from 90001 to 90099
4. TV selling must be delivery related bill, TV service must be order related bill
How shall you configure this in SAP SD? What are the important questions you will ask the client, for more information?
Once you have attempted this we can go a step further (in to more functionalities)
Edited by: Typewriter on Aug 14, 2011 2:35 PM

"RT still cache is full" need to render real-time titles

So I have this problem where at a certain point in my sequence title effects that normally don't need to be rendered suddenly do for the rest of the sequence's duration. when I hold my cursor over the red bars above the timeline is says "RT still cache is full. you can allocate more memory in the system preferences...." but when I do ( change the allocation from 10% to more than that) it either does nothing or makes the problem worse. does anyone know how to get final cut to honor it's realtime abilities with longer sequences? (I'm working with hour+ sequences that are entirely subtitled...)
Is this a result of a 3 gig RAM limit per app? I have 6.5 gigs of RAM. thanks!

FCE>System Settings>second panel Memory and Cache. Increase the still memory allocation.
Also switched to Unlimited RT and live with the dropped frames.
What format are you working in? How large are the images, the frame resolution?

Need to average real time data

I have a sensor that sends 1000 samples per second, The signal is very noisey. I would like a Vi that can read these samples from DAQ6009 and average them out (probably take 10 samples then average, then take next 10 and average and so on). I need to graph the averages and also I need to generate an on/off signal through the DAQ based on the results.

Hello,
I would advise starting off with the "Cont Acq&Graph Voltage-Int Clk.vi" example which can be found in the example finder under Hardware Input and Output > DAQmx > Analog Measurements > Voltage. Here you can experiment with acquiring your sensor data and graphing it. Once you are successfully acquiring this in the manner which you desire, you can begin to look at the post processing stage and subsequent output signals.
Kind Regards,
Paul
http://www.paulharris.engineering

Help needed in the Real Time Project

Dear Experts,
I am preparing the SAP BW consultant interview. Most common questions asked in the interview is "Most challening senario(problem) in ur past company's project and how solved the issue". Please share your experience as a SAP BW consultant in both Support and Implementation projects.Points Vl be awarded. Thanks
with regards..
Ragu.R
Edited by: Ragu R on Mar 19, 2008 10:05 AM

Hi,
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Implementation issues
Lifecycle Implementation
http://help.sap.com/bp_biv170/documentation/SolutionScope_EN.doc
http://help.sap.com/bp_biv235/BI_EN/documentation/BWProjectPlan_EN.mpp
Hope this helps.
Thanks,
JituK

HT1553 What is the best system for a real time cloud back up of documents? My MacBook crashed, and I lost 2 hours of writing and could not find a way to restore it.

My MacBook Pro crashed while I was rewriting a book, lost more than an hour of work and could not find a way to restore it. Did not have Time Machine set up, but it appears that Time Machine does not have Real Time back up and documents must be manually stored.
I need an automatic, real time back up to keep this from happening - I'm not happy my MacBook has crashed twice now. What is the best cloud system for Real Time backup? Thanks to anyone who can help me, I'm not the most astutde computer guy... James

One way would be to use Dropbox, or a similar sync service, and just keep your critical documents in the appropriate folder. Dropbox, at least, keeps a local copy of everything and syncs automatically to the cloud whenver a change is made. Dropbox is free for up to 2GB of data.
There are also true backup services such as CrashPlan+:
http://www.crashplan.com/consumer/crashplan-plus.html
which provide automatic backups whenver a change is detected. It's not free, but usually such services aren't too expensive unless you need to back up a lot of data.
Regards.

How do I sample a frequency or voice input using labview in real time?

This is my first time using labview to sample real-time! I'm trying to setup a microphone, so that when a voice is spoken to the mic I can sample the frequency, and
further customize the data in labview. The final goal is to amplify the frequency and output it to a speaker. If possible via labview. My question is do I need some type of evaluation board , microcontroller, to sample the frequencies and save the data sample to labview. Also, how would I go by doing this in real-time, or when the person is speaking to the mic the voice/frequency can be modified in labview instantenaeously. If someone can give me a step-by-step way of performing this, please let me know.
I currently use Labview 8.2 and 8.5

There are many LabVIEW shipping examples that are built to acquire sound samples from a microphone attached to a sound card. There is also an example on how to play a sound file directly to speakers, that you should definitely take a look at. These examples VIs are found in the Sound folder which is under Hardware Input and Output in the NI Example Finder. Depending on how advanced your frequency analysis will be, you might want to look into purchasing the Sound and Vibration Toolkit. For your specific application, it doesn't sound like you will need the LabVIEW Real-Time Module, you should be able to obtain very accurate results without it. Please view the article linked below for more information on this toolkit. Thanks!
Sound and Vibration Toolkit for LabVIEW
Meghan M.

Triggering Real time job from Batch jobs..

Can we trigger real time jobs from the batch jobs. As soon as batch job completes we need to start real time job automatically. Is this possible with BODI XI?

Greetings Post Originator,
This post is older than 60 days and there are no entries in the past 30 days. Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible.
Thank you for being an active participant in the SAP Forums,
Rob Siegele
Forum Moderator
SAP Americas

Real time communication protocal

Hi all,
I am using compactRIO 9022 and 9024. I need to have real time communication with the central controller.
I am wondering is there any real time communication protocals are available for use or we have to develop by our own.
Best regards,
Yifeng.

Yifeng,
There are a few options that you have as far as tutorials are concerned. Here is a link to an introduction video:
http://zone.ni.com/wv/app/doc/p/id/wv-1349
For the last 5 minutes of the video, it provides a thorough explanation of the basics of Real-Time. Beyond that, there is a Getting Started with the LabVIEW Real-Time Module Guide that you can utilize to set up your project and learn some basic programming skills. It can be found here:
http://www.ni.com/pdf/manuals/371375a.pdf
Hopefully these are a few resources that can get you started. You will find that programming something to a Real-Time target is very similar to just regularly writing code in LabVIEW as far as the majority of structures are concerned. If you need any further help with those basics, I would suggest looking at standard LabVIEW tutorials.
Regards,
Keith M.
Applications Engineer

Implementing Real Time, Outbound Interfaces

Hi All,
I have never worked on Interfaces before.
I need help in Real time, Outbound Interfaces.
How do we implement Real Time and Outbound Interfaces.
Any pointers or suggestions would really be helpful.
Thanks,
Saher

cotton.m wrote:
JMS? Thanks cotton, I will look into JMS
Unless you just wanted to play with sockets for the experience in which case you can do as you like. If you want get better with Java networking then IMO you must get ejp's book. [http://www.amazon.com/Fundamental-Networking-Java-Esmond-Pitt/dp/1846280303]
It's more of a fix before we release it to the poor souls that will be using our software, oh how the public are blind...
Mel

I need to host a Shared PDF on SharePoint. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time.

I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?

try here:
http://www.bbb.org
File a complaint with them. Verizon will call you to fix the blunder.
But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
Good Luck

Needs some Advice on How-to, Real time Price Quote Page?

I need to create a page that gives a real time price quote. I would like to be able to allow the end user to select the an option and in real time update the price and up date a running total. I have looked around for some extentions but have not found anything. Can anyone point me in the right direction?? If a DB is need I use Access and ASP pages.
thanks
Dogger

Anyone????

It needs to be REAL TIME!

Similar Messages

Maybe you are looking for