It only shows a blank screen

Hey all. First of all I am still pretty new to flash so forgive me if I make any stupid mistakes.
I am currently working on a portfolio site made in flash. The site itself is good to go, now all that is left is putting it online.
This is where the main problem is. I used flash to publish into both a HTML and a SWF file and linked both of them including all the images and vids that are reffered to in Filezilla.
Now when I open the HTML file it does show my portfolio in an offline browser window like it should, everything works fine etc. But when I try to visit my site, IE only shows a blank screen
whereas FF shows a blank screen and a small thumbnail in the upper left corner telling me to install flash player. I clicked on it, installed the newest version etc but still the same results.
http://www.ruudhommel.nl/
This is the site in question.
Does anyone have any suggestion?

It appears you have misnamed the file, using an uppercase  i instead of a lowercase.  If I try to link directly to Index.swf I get a no file found error, but if I link directly to index.swf what I imagine is the file in question displays.

Similar Messages

  • My Iphone is stuck at the "connect to Itunes" screen and in Itunes itself it only shows a blank screen.

    While fully restoring my Iphone it is stuck at the "connect to Itunes" screen and in Itunes itself it only shows a blank screen.
    I already tried different computers and tried a DFU firmware restore. My iphone is not jailbroken or some.
    It does just have a new screen due the fact it was broken.
    Sometimes Itunes says my iphone is damaged, sometimes it only shows a blank screen.
    But whatever I do, I cant go around the "connect to Itunes" screen.
    Anyone any suggestions? please help.

    Did you find a solution?
    My touch is doing the same thing.

  • My iphone 4s only shows a blank screen/ battery screen how do I fix that?

    I have tried resetting it by holding the home button and power button. It will come on to the battery charging the screen or showing the apple. It will also just show a black screen. Help me!! It was fine earlier. I think it might be frozen.

    There are two things to try. If the first thing you try fails, try the next.
    Two Button Reset.
    This is the least likely to result in loss of data.  Read that again, especially the phrase "least likley."
    Unplug the iPhone from the computer.
    Press and hold both the home and the sleep/wake buttons (ignore the red slider) until you see the silver Apple logo.
    When you see the logo, let both buttons go.
    If this worked, you should see an icon instructing you to connect to iTunes.  My guess is that the reset did not work.
    DFU Restore
    This will very likley result in loss of data.
    Plug the iPhone into the computer.
    Ensure that it is running the latest version of iTunes and that it has access to the internet.
    Press and hold both the home and sleep/wake buttons for exactly eight seconds.
    Release only the sleep/wake button but continue to hold the home button for another five seconds.
    Let go of the home button, then look at the computer screen for an instructional popup.
    The popup should say "iTunes has detected a device in recovery mode. . .(etc)"  Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
    If no popup appears, repeat the above DFU instructions.  If you 've never done a DFU, it may take about three attempts to get the timing right.

  • MY MAC BOOK ONLY SHOWS A BLANK SCREEN ON START UP

    THE SCREEN STAYS WHITE AFTER BEING STARTED.  NO KEY AFFECT THE SCREEN

    Screen would not function after sleep
    MacBook Pro Mod. A1229 running Sys 10.7.2 & Mac Software
    Screen would not 'light' after a sleep period (about an hour).
    Neither touching the SPACE BAR nor pressing the mouse button had an effect on the screen.  However, pressing keys indicated a computer response.
    Manual SHUT DOWN by holding power key for 10+ seconds.
    Restart was somewhat normal but Apple Logo and 'activity' wheel appeared slightly larger than normal and not the same brightness contrast.  After initial period the screen went 'blank' but there seemed to be some computer function - response to certain keystrokes.  Subsequent retries produced the same result.
    Based on Apple Support & Mac Support groups:
    1. SMC reset
    2. PRAM reset
    3. Boot Safe Mode
    No change.
    Restarted holding Command/S to get UNIX start.  The screen did function properly (my knowledge of UNIX is limited - I did NOT attempt a fix from this prompt).
    Restarted from the ORIGINAL DVD that came with the machine and the START UP was NORMAL and the SCREEN was NORMAL.  This DVD was an install DVD so I used QUIT from the menu bar and the system was still functioning correctly.
    Subsequent tests of the SLEEP/WAKE cycles produced normal results with no screen problems.
    There are still no problems after two subsequent use periods with normal shut downs and normal start ups.

  • Update notification shows there are updates but when I click on the update option it shows a blank screen

    The update option on the app store shows a notification that I have 'n' numbers of updates but when I click on the update option it only shows a blank screen. Even after updating the apps individually from the purchased option, the update option still shows a blank screen instead of "All you applications are up to date". Please help.

    Many people are having this problem for the last couple of days. According to Fly150in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store.

  • After upgrading to the newest version of firefox my Juniper J-web web-gui showing a blank screen after login.

    Hi.
    After the newest version of firefox the browser only show a blank screen after doing the login on all Juniper SRX devices.
    Some one who can help me here?
    Kind regards
    Jonas (Denmark)

    Jonas,
    Please see:
    *[https://support.mozilla.org/kb/Server+not+found]
    *[https://support.mozilla.org/kb/Firewalls]
    *[http://kb.mozillazine.org/Error_loading_websites]
    *[http://kb.mozillazine.org/Browser_will_not_start_up]
    It could be that you need to reset Firefox to its defaults, however there could also could be something going wrong with the login request. Please check the Firewalls and loading websites to see if anything is blocking a request.

  • Skype Video Calling only showing a black screen

    Hi,
    When I make a viseo call, my computer only shows a black screen. The other person can see me just fine, but my video show just a blank screen. It's definitely a problem on my computer as it has happened with a couple of different people. 
    Both screens that should be showing video (the one that shows them, and the one that shows me) are showing black.
    I've had a look around but haven't been able to find any solutions. 
    Any help would be much appreciated.
    thanks
    Solved!
    Go to Solution.

    Most likely the issue is with your display adapter.
    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.

    The video app on my iPad now only shows a black screen. Used to work fine then crashed in the middle of a short video.  When I open the app the screen is just blank. As it is a default app I can't delete and reinstall. Anybody else experience this?

    Try searching for the name of one of your videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
    If that doesn't work then try closing the Videos app via the taskbar : from the home screen (i.e. not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

    YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
    I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

    You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

  • I am having a minor problem to my iphone. It crashed and when i tried to restore it, its only showing the home screen without any icons whatsoever. How can i fix this issue?

    my iphone crashed and isn't showing any icons or apps. Its only showing the home screen. How can I fix or resolve it.

    Restore your iphone
    If you can't update or restore your iPhone, iPad, or iPod touch

  • While trying to open the mail , it shows a blank screen then went to home page.

    while trying to open the mail , it shows a blank screen then went to home page.

    Hello there, Nina2800.
    It sounds like you are having issues connecting to the iTunes Store and getting a blank page.  The following Knowledge Base article offers up some great steps for verifying connectivity:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Troubleshooting on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your internet service provider (ISP) may be blocking your access. 
    Update iTunes to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. To configure your firewall, please refer to the "Blocked by firewall" section in this article.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Click here to find out how to use Keychain First Aid to resolve any issues with your keychain.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    Additionally, this article provides some additional recomendations if the issue persists:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My iPhoto '08 (v 7.1.5) shows a blank screen (no photos). How do I rebuild it from my iPhoto library.  Thanks!

    My iPhoto '08 (v 7.1.5) shows a blank screen (no photos). How do I rebuild it from my iPhoto library.  Thanks!

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

    I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

    Thanks Lucas,
    I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info.  My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone.  Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple.  I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

  • When I click on camera, I only get a blank screen. I used it earlier to take a picture.

    When I click on Camera, I only get a blank screen. I used it earlier to take a picture.  What is wrong?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

Maybe you are looking for

  • Fields Missing in the data source

    Hello Friends ,                       I have to Append structures in my data source , and there are few fields under each append , the fields existing in Dev are missing in QA under one of Append strcuture's in QA. I see the fields when I double clic

  • Is there a way to create dynamic playlists on the fly in music on smart media?

    Often I'm at a friends house and we're looking through music trying to pick the next song to play as one is finishing. It would be really great to have an dynamic playlist where you could add and subtract songs as you go and so keep the music playing

  • Automatically output report to excel from a batch job

    We have business users who require that a standard report be run daily as a batch job and output to a printer, which is using a large pile of paper every day.  I have challenged the rationale for this without success, and am trying to find a way to c

  • Accessing WS data set during selection screen processing in BG processing

    Hello ABAPers, I am attempting to access a working storage table variable that is set during selection screen processing after the user submits the program to background processing (using F9). I have tried using export to memory id in the at selectio

  • Voltage indicator rather than battery gauge?

    Hi, I would simply like to know how to get numbers instead of the traditional battery gauge to indicate the voltage left on my 4G Ipod Battery. My Ipod has the latest software update installed (2006-01-10) and I am using it in a windows XP environmen