It requires activation of Windows! Why ?!

It was purchased a laptop with Windows 8 Professional on board.
On Downgrade I activated Windows 7 Pro.
Ability to make some time ago was put into a laptop repair center certified HP.
On his return from repair - I changed the video card chip, - Windows suddenly announced the absence of authentication and could not be activated with the current key.
To demolish all the software installed on your computer and reinstall again - not a solution: some programs can not be reset.
We need some how to activate the operating system in the current circumstances.
How to do it? 

Is Microsoft agrees to comply support OEM versions? Support OEM is always on the manufacturer. Read the license agreement.
The issue was resolved in a roundabout way: the reference to an authorized service center found replace the motherboard GPU in the repair of what I said in the first message.After talking with the support of the service center, it was decided that the firmware of the motherboard serial number and the key of faulty equipment. Exactly how this will be done - I do not care. Importantly, the authorized center "HP" admitted his mistake and eliminate it.

Similar Messages

  • Trying to nstall Photoshop CS2 on a new PC with Windows 8.1? Adobe uploaded me a version that doesn't require activation, but it doesn't work!

    Trying to Install Photoshop CS2, which I bought several years ago, on a new computer with Windows 8.1? Adobe uploaded me a version that it says doesn't require activation, but it doesn't work!

    Your advice to use the serial number provided by Adobe is right on point.
    The only thing special I've done that's not typical is that I have UAC disabled, which does serve to make a system more compatible with older software (and with old geeks like me who prefer to be full-time admins).
    When I installed Photoshop CS2, it just went in and worked.  I didn't think twice about it.
    -Noel

  • Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation

    I purchased Adobe Creative Suite 2 Premium, it cost more than €2,000. When I recently tried to re-install it due to having to reformat my hard drive I could no longer activate it over the phone or online.
    When I rang the help number it directed me to the downloadable versions that don't require activation. Great! UNTIL I realise Adobe Acrobat 7 Professional is only available for Windows as a download.
    Where is the download for the Mac Version as it not included in the bundle either. This is extremely urgent. Thank you in advance.

    To maswatson
    The answer to your question of March 12, 2015 – "Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation[?]" – is … nowhere. That doesn't mean it's not available to you, however. I have successfully installed several CS2 programs and Acrobat 7, on two computers.
    The hard drive on my MacBook Air crashed recently. After a new drive was installed I had to reload various programs, including CS2 Premium. I used the original disks and the serial number on the package.
    When I tried to open InDesign, however, I got an "Activate Using the Internet" message which led to an "Activation Server Unavailable" message that gave me three options, the last of which was "Click the Phone Activation button to activate the product over the phone." I called the toll-fee number and heard the following recorded message: "We no longer support activation issues over the phone."
    So I searched the Web, figuring that others had encountered and solved this problem. Eventually, I found "Creative Suite Help / Download Acrobat 7 and OS2 Products" at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I also found "How to Fix Adobe’s “Licensing for this product has stopped working” Error by Aaron Nelsen at http://hijinksinc.com/2010/01/20/how-to-fix-adobes-licensing-for-this-product-has-stopped- working-error/. He writes "… you MUST delete adobe_00080000_tsf.data and adobe_00080000_event.log" which is found in /Library/Preferences/FLEXnet Publisher/FLEXnet. So I did that.
    I also deleted Illustrator CS2, InDesign CS2, and Photoshop CS2 from my Applications folder. I did not delete Acrobat 7 or GoLive.
    After clicking on "English" at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#, I downloaded Illustrator CS2 for Mac, InDesign CS2 for Mac, and Photoshop CS2 for Mac. I was not able to download Acrobat 7 because the only option is for Windows. As you know, there is no download for Mac.
    Illustrator CS2, InDesign CS2, and Photoshop CS2 all opened without any problems. When I tried to open GoLive, I got the same "Activate Using the Internet" message I got at the outset, when I tried to open InDesign. I proceeded, and now have a 30-day trial. The same limitation has been placed on Illustrator, InDesign, and Photoshop, because I downloaded them, whereas GoLive was installed from the CS2 disks.
    Next, I opened Acrobat 7.0 Professional – the one installed from the original CS2 disks. It works fine.
    BOTTOM LINE: If you want Acrobat 7.0 Professional, install Creative Suite using original CS2 disks, then delete the other CS2 programs from those disks. If you want Illustrator CS2, InDesign CS2, Photoshop CS2, and others, download them from https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I am hoping this explanation will help you. I feel great sympathy for you because the "answers" you received have been obtuse and clearly less than helpful. (I requested a "Yes," "No," or "Don't know" answer to a very straightforward question, but didn't get it.)
    My experience tells me that the answer to your question "Where is the Mac downloadable version of Adobe Acrobat 7 Pro that doesn't require activation[?]" – is … nowhere, but you don't need to download it. It's on the original disks and it does not require activation. That's why Adobe did not included it with the Windows version at https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html#.
    I hope this answers your question, solves your problem, and ends your frustration.

  • Closing active terminal window with applescript

    I made a very basic script to lock my screen, and I like how it works. Some of my co-workers would also like it but it has one problem.
    When the script runs, a terminal box pops up at the end saying [process complete]. I can click through this and I don't care, they do.
    I can't just killall terminal because we use terminal and that could kill our work.
    We sometimes need to see output from a script and like the process complete, so don't want to reconfigure our systems to never display it.
    I'm trying to find a way to use applescript or something to kill the active terminal window, or the window with the title of LockScreen or something.
    Anyone have an idea?
    I was hoping something like this would exist but it doesn't seem to: tell application "Terminal" to close window

    Here is an easy approach.  Start Applications -> Automator
    Select Application
    In Automator search for "Start Screen Saver".  This should be under Library->Utilities
    Drag "Start Screen Saver" to the right side panel.
    Save the Automator app.
    If the user has System Preferencs -> Security -> Require Password ... set, then one the screen saver has started running, it will require the user to enter their password before getting control back.
    This Automator app can be double clicked, it will not require the terminal.
    With respect to your script.  If this is a shell script, AND if you wish to continue using it, then you could create an Automator app that uses "Run Shell Script" under Automator Library->Utilities.  This will also NOT require the use of Terminal, however, be aware that when Automator runs a shell script it DOES NOT have the same environment as when you are running a shell script at your Terminal prompt.  There are very few environment variables set, and for example the USER, HOME, current working directory, PATH, etc... may not be the same.  If you have dependencies on specific environment information, you may want to write a simple automator script the using "Run Shell Script" to output various environment information into a file so you can see what you have to work with
    (id -a
    pwd
    echo "$#"
    echo "$@"
    printenv
    ) >/tmp/automator.environment.txt

  • Activation from Windows 8 Pro to Windows 8.1 Pro

    I  generally use Windows 7 Home Premium in my Acer 4738Z and my old Acer is broken.
    so I buy a new Acer E1-410 (and bla-bla in a nutshell) my new Acer E1-410 can't use Windows 7 it must uses
    UEFI system (in my previous post http://social.technet.microsoft.com/Forums/windows/en-US/0da6bd1f-ee2c-45c1-91cf-1f1d9d0595f5/how-to-install-windows-7-home-premium-32bit-with-no-legacy-option-in-bios-setting-just-uefi-in?forum=w7itproinstall#cb3f8d18-3d61-41de-8ba3-9eaef87f5849) 
    So I WRONG ? To buy Windows 8 Pro Upgradeable Only (and before you announce Windows 8.1 Pro)
    But FINALLY I can install my new Acer E1-410 in Windows 7 Home Premium (with flash bios to active thier Legacy IDE Boot) and UPGRADE to Windows 8 Pro. (FINISH).
    I already ask Microsoft Indonesia by phone to check my product key on windows 8 Pro genuine they said yes it's "only upgradeable" and YES it is genuine.
    and finally these my problem:
    They said to I CAN FREELY Upgrade to Windows 8.1 by Microsoft Store
    so I wanted to upgrade to Windows 8.1 Pro to why not ?? You give me free :) ,...
    But without any knowledge how to that (My Windows Store doesn't have store icon
    to Upgrade to Windows 8.1 Pro).
    So I google2xxxx  how to UPGRADE to Windows 8.1 Pro
    finally I desperate and I download Windows 8.1 Pro ISO (maybe/must be pirate one) from torrent
    and fresh/clean install to Windows 8.1 Pro (WITHOUT UPGRADE form Windows 7.1 -> Windows 8 Pro)
    OFCOURSE !!! I KNOW IT CAN'T BE ACTIVATE with my older Windows 8 Pro Product Key
    So i ask you :
    1. What are the disadvantages if I NOT activated my Windows 8.1 Pro ?
    2. It's true i can uses all application (on desktop) without any disadvantages ?

    Hi,
    There are many limitations when the windows is not activated, for example, personalization settings section is disabled as below:
    The disabled settings include:
    •Your lock screen wallpaper and apps
    •Start Screen color and background
    •Your account picture
    You need to activate Windows before you can personalize your PC and every couple of hours, you'll see a full-screen activation request:
    The application is available to use, but I suggest to run the genuine Windows and activate it, because it is legally protected.
    Regards
    Wade Liu
    TechNet Community Support

  • Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access

    Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
    General: 
    Could not connect to the Active Directory.
    Active Directory Certificate Services will retry when processing requires Active Directory access.
    We have a Windows 2008 Server Enterprise with AD . I would like to enable the service  "Certificate Services"  that
    allow me to enable radius to authenticate users wireless with the active directory.

    Hi, 
    Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
    Everything for us is exactly the same as szucsati and Racom
    NMNM, 
    Please give us an answer on this as the link provided is absolutely useless.
    Thank you.

  • Disabling Active call window...cupc 8.6

    Question from one of my users...is there a way to disable the active calls window when the user is on the phone?
    I just got an earful about how annoying this is...
    Thanks in advance for any advice...
    ~Ray

    Not without disabling deskphone/softphone control and turning CUPC into an IM&P-only client. If you wanted to go that route you would want to disable the CTI, CCMCIP, and Audio profiles within the CUP Admin > CUPC/Jabber > User settings.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Firefox won't open links that require a new window to open

    Links that require a new window to open for the link won't open. I thought it was a Java issue, but I updated both Java and Firefox without any success.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I forgot the apple id for my ipad 2, now it's locked and required active again?!

    I want to give my ipad 2 to my brother in law, so I easered it and update it to version 7.03, and creat a new apple id for my ipad two months ago, then go travelling for more than one month.
    My family try so many times of the wrong password on it, now it's lock and required to be active again.
    But I forgot the id!!!
    What can I do for it?

    Dan Chen-hujiu wrote:
    But I forgot the id!!!
    What can I do for it?
    Go Here  >  iForgot
    Dan Chen-hujiu wrote:
    ... update it to version 7.03,..  try so many times of the wrong password on it, now it's lock and required to be active again.
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    If you do not have that information you will not be able to use the Device

  • Acrobat 7 Pro requires activation from time to time

    I have installed Acrobat 7 Pro v7.1.0 on a netbook.
    Now, Acrobat requires activations. The time distance between activation requirements gets shorter and shorter.
    The Error Message (translated from german to english):
    The configuration of your computer was changed since last activation
    If you want to use your product furtgher press OK to reactivate it again
    for the new system configuration.
    After pressing OK the activation process starts and is finished with a "Thank you for activating".
    The error occurs sometimes 5 timesc a day !!!
    I am wondering how often i can activate the product.
    I have NO VMware or other virtual machine software running on this netbook.
    I've already reinstalled the software. Same error.

    XP 64-bit is unsupported. However, when these problems occur under Acrobat 7, there was a patch downloadable from an Adobe site. It was only made available through the Activation hotline, since it required a reset of the Acrobat activation settings on the Adobe activation server. I do not know if they Adobe makes this patch available to XP 64-bit users or if it will solve the problem in this environment.

  • How can I get the windowRef of the active document window?

    Hello,
    Hou could I get the ADMWindowRef of the active Document window in Illustrator CS4- CS5? I can not use ADMWindowSuite1  because is On Mac OS only.
    Thank you very much to Everybody.

    There's no API for this, not if you want to make use of it in a useful way. You have to write Windows API code to do it. I reccommend using Spy++ to suss out the structure. Frankly, it's pretty annoying. It'd be extremely helpful if the API provided this, but it doesn't.

  • I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flas

    I have checked all of my permissions and contiue to get this message after 68% mark when trying to install Adobe flash player. User does not have sufficient privileges to install adobe flash player. A required file (C:\windows\syswow64\macromed\flash\flashplayer.xpt:5) could not be written due to insufficient permission.

    Perform a clean install as described in https://forums.adobe.com/thread/928315

  • Application Requirement Not Detecting Windows 8.1

    Hi all - Wondering is anyone else is seeing this behavior.  If I deploy an application that has no OS requirement set it will show up fine on a Windows 8.1 machine.  If I add an OS requirement for all Windows 8 (All Windows RT, All Windows 8 (64-bit)
    & All Windows 8 (32-bit))) the machine does not show the application as available.  Below is an excerpt from the AppIntentEval.log before and after the Windows 8 OS requirement is selected.  It appears that SCCM is not picking up the Windows
    8 OS requirement properly.  Am I missing something?  Enviroment is ConfigMgr 2012 SP1, client version is 5.00.7804.1202.
    With no OS requirement selected.
    ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/16 :- Current State = NotInstalled,
    Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
    With OS requirement Windows 8 selected.
    ScopeId_A0D7A85E-A3C2-486D-8931-493AB26E1100/Application_2d5ea2a6-9567-4deb-89c0-03420259ad2e/17 :- Current State = NotInstalled,
    Applicability = NotApplicable, ResolvedState = None, ConfigureState = NotNeeded, Title = App-V 5.0 SP1
    Thanks,
    Rick

    I may have found my issue.  Looking at
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientOS it looks like Windows 8.1 only shows supported under SCCM 2012 R2.  This could explain my unexpected behavior under SCCM 2012 SP1.

  • There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

    here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

    You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • Active SQL Window Truncates SQL

    My active SQL window is truncating the statement being returned from the sql area. Its also not formatted, is there any way to control this?
    Thanks in advance...

    No, but you can request this at the SQL Developer Exchange though, so other users can vote and add weight for possible future implementation.
    And if you're up to it, you can make your own report, using other views to query the full SQL statements.
    Regards,
    K.

Maybe you are looking for