IT Resource parameters through API
Hi,
does anybody know what API is used by provisioning processes to get IT Resource parameters (such as hostname, port, admin pass etc?)
Hi...
U can use the
method -
public Thor.API.tcResultSet getITResourceInstanceParameters(long plITResourceInstanceKey)
from the Interface -
tcITResourceInstanceOperationsIntf
to fetch the IT resource instance parameters...
rgds,
Priya
Similar Messages
-
How To Load a Project Budget Line Through API in R12 ?
Hello
Could you please let me know how to load the project budget lines through API in R12 system, I am trying with below script but it is not working.
Could you please let me know if you have any solution.
=========================================================================================================================================================================
Script
DECLARE
--––variables needed for API standard parameters
l_api_version_number NUMBER := 1.0;
l_commit VARCHAR2 (1) := 'T';
l_return_status VARCHAR2 (1);
l_init_msg_list VARCHAR2 (1);
l_msg_count NUMBER;
l_msg_data VARCHAR2 (2000);
l_data VARCHAR2 (2000);
l_msg_entity VARCHAR2 (100);
l_msg_entity_index NUMBER;
l_msg_index NUMBER;
l_msg_index_out NUMBER;
l_encoded VARCHAR2 (1);
i NUMBER;
a NUMBER;
--––variables needed for Oracle Project specific parameters
l_pm_product_code VARCHAR2 (100);
l_pa_project_id NUMBER;
l_pm_project_reference VARCHAR2 (100);
l_budget_type_code VARCHAR2 (30);
l_change_reason_code VARCHAR2 (30);
l_description VARCHAR2 (255);
l_entry_method_code VARCHAR2 (30);
l_resource_list_name VARCHAR2 (60);
l_resource_list_id NUMBER;
l_budget_lines_in pa_budget_pub.budget_line_in_tbl_type;
l_budget_lines_in_rec pa_budget_pub.budget_line_in_rec_type;
l_budget_lines_out pa_budget_pub.budget_line_out_tbl_type;
l_line_index NUMBER;
l_line_return_status VARCHAR2 (1);
l_user_id NUMBER;
l_responsibility_id NUMBER;
API_ERROR EXCEPTION;
BEGIN
-- SET GLOBAL INFO
SELECT user_id,
responsibility_id
INTO l_user_id,
l_responsibility_id
FROM pa_user_resp_v
WHERE user_name = 'RAJU';
PA_INTERFACE_UTILS_PUB.SET_GLOBAL_INFO (p_api_version_number => 1.0,
p_responsibility_id => l_responsibility_id,
p_user_id => l_user_id,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status
IF l_return_status != 'S'
THEN
RAISE API_ERROR;
END IF;
--––PRODUCT RELATED DATA
l_pm_product_code := 'GMS';
--––BUDGET DATA
l_pa_project_id := 6271;
l_pm_project_reference := NULL;--'ABC';
l_budget_type_code := 'FC';
-- l_change_reason_code := 'INITIAL';
l_description := 'New description –> 2';
l_entry_method_code := 'PA_TASKLVL_BASELINE';
l_resource_list_id := 1001;
--––BUDGET LINES DATA
a := 1;
FOR i IN 1 .. a
LOOP
l_budget_lines_in_rec.pa_task_id := 405156;
l_budget_lines_in_rec.pm_task_reference := NULL;
l_budget_lines_in_rec.resource_alias := 'Labor';
l_budget_lines_in_rec.resource_list_member_id := '1034';
-- l_budget_lines_in_rec.budget_start_date := '01-Jan-13';
-- l_budget_lines_in_rec.budget_end_date := '31-Dec-14';
-- l_budget_lines_in_rec.period_name := 'JUL-10FY2011';
l_budget_lines_in_rec.description := 'Some Text';
l_budget_lines_in_rec.quantity := 100.00;
l_budget_lines_in_rec.raw_cost := 300.00;
l_budget_lines_in (i) := l_budget_lines_in_rec;
END LOOP;
--––INIT_BUDGET
pa_budget_pub.init_budget;
--––LOAD_BUDGET_LINE
FOR i IN 1 .. a
LOOP
pa_budget_pub.load_budget_line
(p_api_version_number => l_api_version_number,
p_return_status => l_return_status,
p_pa_task_id => l_budget_lines_in (i).pa_task_id,
p_pm_task_reference => l_budget_lines_in (i).pm_task_reference,
p_resource_alias => l_budget_lines_in (i).resource_alias,
p_resource_list_member_id => l_budget_lines_in (i).resource_list_member_id,
p_budget_start_date => l_budget_lines_in (i).budget_start_date,
p_budget_end_date => l_budget_lines_in (i).budget_end_date,
p_period_name => l_budget_lines_in (i).period_name,
p_description => l_budget_lines_in (i).description,
p_raw_cost => l_budget_lines_in (i).raw_cost,
p_burdened_cost => l_budget_lines_in (i).burdened_cost,
p_revenue => l_budget_lines_in (i).revenue,
p_quantity => l_budget_lines_in (i).quantity
END LOOP;
IF l_return_status != 'S'
THEN
RAISE api_error;
END IF;
--––EXECUTE_CREATE_DRAFT_BUDGET
pa_budget_pub.execute_create_draft_budget (p_api_version_number => l_api_version_number,
p_msg_count => l_msg_count,
p_msg_data => l_msg_data,
p_return_status => l_return_status,
p_pm_product_code => l_pm_product_code,
p_pa_project_id => l_pa_project_id,
p_pm_project_reference => l_pm_project_reference,
p_budget_type_code => l_budget_type_code,
p_change_reason_code => l_change_reason_code,
p_description => l_description,
p_entry_method_code => l_entry_method_code,
p_resource_list_name => l_resource_list_name,
p_resource_list_id => l_resource_list_id
IF l_return_status != 'S'
THEN
NULL; --––RAISE API_ERROR;
END IF;
--––FETCH_LINE
FOR l_line_index IN 1 .. pa_budget_pub.g_budget_lines_tbl_count
LOOP
pa_budget_pub.fetch_budget_line (p_api_version_number => l_api_version_number,
p_return_status => l_return_status,
p_line_index => l_line_index,
p_line_return_status => l_line_return_status
IF l_return_status != 'S' OR l_line_return_status != 'S'
THEN
RAISE api_error;
END IF;
END LOOP;
--––CLEAR_BUDGET
pa_budget_pub.clear_budget;
IF l_return_status != 'S'
THEN
RAISE api_error;
END IF;
--––HANDLE EXCEPTIONS
EXCEPTION
WHEN api_error
THEN
FOR i IN 1 .. l_msg_count
LOOP
pa_interface_utils_pub.get_messages (p_msg_data => l_msg_data,
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out
DBMS_OUTPUT.put_line ('Error Mesg ' || l_data);
DBMS_OUTPUT.put_line ('Error Mesg ' || l_msg_data);
END LOOP;
WHEN OTHERS
THEN
FOR i IN 1 .. l_msg_count
LOOP
pa_interface_utils_pub.get_messages (p_msg_data => l_msg_data,
p_data => l_data,
p_msg_count => l_msg_count,
p_msg_index_out => l_msg_index_out
DBMS_OUTPUT.put_line ('error mesg ' || l_data);
END LOOP;
END;
=========================================================================================================================================================================Not knowing how its embedded... you will need to get the report instance from the dll and cast it as a ReportDocument object.
Given the info so far, that is all we can say.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Difference in Creation of BRF+ artifact through API / Workbench
Hello ,
I am new in BRF+ development. Need your help . While creating BRFPlus artifact in NW 7002 , what will be differences
1) if we create Application / function / Data object / Ruleset etc using BRF+ workbench and use ABAP code for calling /passing parameters
2)if we create all these through through APIs .
can anyone guide me please .
Thanks in advance.
PSHI Carsten,
Thanks for you response.
Just to clarify some more ...Is there any issue later / limitation while extending/ changing the functionality of rulesets if we create those with workbench in place of using APIs .
For example in production server if we need to change / replace some context parameters OR adding one more row in decision table / or any other change.
Thanks & Regards,
PS -
Task Does not get triggered when User is created through API
Hi,
Each new user in our OIM environment is supposed to have a iPlanet account. I have configured the access policy for the same and it works.There is also a process task which needs to be triggered once the user is successfully created in the DS. Following is my issue:
1.When the new user is created through the admin console, the user is provisioned successfully to DS as well because of the access policy and the task also gets triggered successfully.
2. There is an approval workflow for another resource, at the end of which a user needs to be created through APIs in OIM. The user gets created successfully in OIM and also get provisionined to DS just like in the above use case. However, the task fails in this case. I see that the task is being triggered from the user's resource profile, but the status is rejected.
Can someone please tell me why is this happening. I initially though there was some issue with my adapter for the task, but in case 1 it works just fine.
Following is the exception I get as soon as the iPlanet connector finishes creating the user in DS:
java.lang.ClassCastException: java.lang.String
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSETFIELDSONUSERCREATE.implementation(adpSETFIELDSONUSERCREATE.java:51)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
Thanks,
SupreethaHi,
Have you checked the process data that you are passing to this adapter and check the mapping of process data to the adapter variable. Try to log the value which you get from process data. I got this error when I was trying to use the literal value from process data as "true" for a boolean value. This is a bug. This value is not actually a boolean value. It threw me error too sometimes back. Either you pass the boolean value from adaptor factory as a literal value or change the type boolean both in your code and the adapter.
OIM works strangely. ;) All the best,
Manila -
Direct provisioning through API - OIM 11g
Hi,
OIM 11g here. I am trying to use the APIs to make direct provisioning. What i have done till now:
tcUserOperationsIntf userIntf = (tcUserOperationsIntf)ioUtilityFactory.getUtility("Thor.API.Operations.tcUserOperationsIntf");
ResourceData rd = userIntf.provisionResource(userkey, objectkey);
now, in the ResourceData object i have two ids, obiKey and ouiKey. Now i need to extract the process instance key with those numbers. How can i do this?
Using the userIntf getObjects method i can get the list of objects provisioned, iterate over it and retrieve the process instance key of the object which matches obiKey and ouiKey. Is there an easier method to do this?
Another question, which one is the process instance key, ORC_KEY or ORC_TOS_INSTANCE_KEY ?
Last, how do i trigger the task responsible for provisioning given the filled process form?
thx in advanceOk, i guess the process instance key is ORC_KEY.
Now i am trying to provision through APIs a resource object (say AD User) to an OIM user. I have used the provisionResource(userkey, objectkey) method, but the Create User task is not put in the Resource History (there is only the System Validation Task), and i don't know how to look for it's task id to add it manually. -
Add approval task through API call
Hello, I am attempting to solve the following problem.
I have a UDF defined on the Resource Objects form (OBJ table), this filed contains a comma delimited list of OIM groups which is of size n (based on the resource object).
I would like to create an approval task for each group in this list. In addition i would like the name of each task to show up as the group name. so when a user logs into the UI and looks at the approval details the see the approval task as the group name.
I have been able to add a task using tcProvisioningOperationsIntf.addProcessTaskInstance API however this API does not allow me to modify 1) the group to assign the request to and 2) the name of the task.
thanksHey Kevin, thanks for responding.
This query will allow me to get the process task key, so i can be added to the approval task via. tcProvisioningOperationsIntf.addProcessTaskInstance. However the issue is, no task currently exists. So before i can add an instance of the task i have to actually create a new task. but i was un-sure how to accomplish this through api calls.
The goal here is to allow a list of groups to be configurable at the resource level without having to modify the approval process.
thanks -
Check resource connection through workflow
Hello..
How we test resource connection through a workflow.
I am using getConnection method but that is not working fine for me. I guess i am giving some parameters wrong.
Would be helpful if anyone could share their knowledge on the same.
Thanks in advance.Create a Java method like in the following example and call if from anywhere you like
public static void testConnectionExample() throws WavesetException {
Resource resource = (Resource) getSession().getObject(Type.RESOURCE, "Active Directory");
ResourceAdapter adapter = ResourceOp.findAdapter(resource, resource.getCache());
WavesetResult result = adapter.testConfiguration();
assert result == null || result.getErrorMessages() == null;
} -
Error while creating contact through API in Install Base
Hello
I am trying to create contacts when creating a install base through API...
I tried below code as per metalink note# 215456.1 and giving the below error. I checked setup andI have 'Ship To' exists in Instnace Party Account Relationsship setup in the aplication and also I have a party Id 1232890 exist in hz_parties table with party type as 'Person' and I passed contact_ip_id as instance_party_id from CSI_I_PARTIES table for the instance to be update...
Also, can anybody help me how to purge the error messages before calling the API, suppose if i have 2 records and all two records will error then my second record error getting contatenated with my first error and message count also getting increased(see error message below as message count coming as 2 even though there is only one error)
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
p_instance_rec CSI_DATASTRUCTURES_PUB.INSTANCE_REC;
p_ext_attrib_values_tbl
CSI_DATASTRUCTURES_PUB.EXTEND_ATTRIB_VALUES_TBL;
p_party_tbl CSI_DATASTRUCTURES_PUB.PARTY_TBL;
p_account_tbl CSI_DATASTRUCTURES_PUB.PARTY_ACCOUNT_TBL;
p_pricing_attrib_tbl CSI_DATASTRUCTURES_PUB.PRICING_ATTRIBS_TBL;
p_org_assignments_tbl CSI_DATASTRUCTURES_PUB.ORGANIZATION_UNITS_TBL;
p_asset_assignment_tbl CSI_DATASTRUCTURES_PUB.INSTANCE_ASSET_TBL;
p_txn_rec CSI_DATASTRUCTURES_PUB.TRANSACTION_REC;
x_instance_id_lst CSI_DATASTRUCTURES_PUB.ID_TBL;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_msg_index_out NUMBER;
t_output VARCHAR2(2000);
t_msg_dummy NUMBER;
BEGIN
p_party_tbl(1).instance_party_id := null;
p_party_tbl(1).instance_id := 1216497;
p_party_tbl(1).party_source_table := 'HZ_PARTIES';
p_party_tbl(1).party_id := 1232890;
p_party_tbl(1).relationship_type_code := 'Ship To';
p_party_tbl(1).contact_flag := 'Y';
p_party_tbl(1).contact_ip_id := 1699185;
x_msg_count := 0;
p_party_tbl(1).OBJECT_VERSION_NUMBER := 1;
-- Now call the stored program
csi_item_instance_pub.update_item_instance(
1.0,
'F',
'F',
1,
p_instance_rec,
p_ext_attrib_values_tbl,
p_party_tbl,
p_account_tbl,
p_pricing_attrib_tbl,
p_org_assignments_tbl,
p_asset_assignment_tbl,
p_txn_rec,
x_instance_id_lst,
x_return_status,
x_msg_count,
x_msg_data);
-- Output the results
if x_msg_count > 0
then
for j in 1 .. x_msg_count loop
fnd_msg_pub.get
( j
, FND_API.G_FALSE
, x_msg_data
, t_msg_dummy
t_output := ( 'Msg'
|| To_Char
( j
|| ': '
|| x_msg_data
dbms_output.put_line
( SubStr
( t_output
, 1
, 255
end loop;
end if;
dbms_output.put_line('x_return_status = '||x_return_status);
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line('x_msg_data = '||x_msg_data);
-- COMMIT;
END;
ERROR
SQL> @p
Msg1: The Party Relationship Type (Ship To) entered is either invalid or it does
not exist in the Installed Base Lookups
Msg2: The Party Relationship Type (Ship To) entered is either invalid or it does
not exist in the Installed Base Lookups
x_return_status = E
x_msg_count = 2
x_msg_data = The Party Relationship Type (Ship To) entered is either invalid or
it does not exist in the Installed Base Lookups
PL/SQL procedure successfully completed.Hi
We are in 11.5.10.2 and I already checked notes which you sent before and setups are fine as the relationship type' Ship to' having 'contacts' enabled in the setup.
I am also seeing a differernt issue as once I update existing item instnace with the status 'Return for Credit' through API, system is not allowing me to update the extended attributes through front end application manually and I am seeing a note at the end of the screen as 'Note: This item instance cannot be updated. ' and this is only happening when I update the item instance status to 'Returned for Credit' not when I create new item instances with status as 'Created'. Is this intended functionality to restrict update on extended attributes if I change the status of item instnace to 'Return for Credit' ?
Thanks -
I want to Pick Release in 11.5.9 through API , What API I can Used?
Hi.expert
I want to Pick Release through API in 11.5.9, What API I can Used?You need to apply patch 3438823 which provides the Pick Release Public API to create and release a picking batch and also provides the functionality to allow picking criteria of groups of items based on Item category and category sets and also provision is provided to "exclude/include only" ShipSets/SMCs in a batch.
Check Note: 435444.1 - WSH_PICKING_BATCHES_PUB Package for Pick Release Public API does not Exist in Release 11.5.9
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=435444.1 -
I am facing problem in loading data in ap_invoices_all in R12 through API
Hi,
When I am trying to load data in R12 through API (ap_invoices_pkg. Insert_Row), I can see my record in base table ap_invoices_all but I can't find my record from frontend application.
MAGSA AP Supervisor -> Invoices -> Entry -> Invoices.
I will be very greatful if anyone can tell me the reason why I am not able to find my record.
Thanks
RanjanaI believe the issue is related to Multi Org Access Control (MOAC) - pl see MOS Doc 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code - for a discussion.
HTH
Srini -
How to set FTP parameters through Module Processor?
Hi
We read parameters set in the communication channel of an adapter through method getSupplementalData("module.parameters") of com.sap.aii.af.mp.module.ModuleData.
I have following question regarding reading/writing configuration data, set in communication channel for a File adapter:
1) How can I read the FTP Connection Parameters in a module of a module processor?
2) Is it possible to update FTP parameters at Module Processor level for Receiver Adapter?
3) If update of parameters through Module Processor is not possible, then is there some other way I can set the FTP parameters?
Regards
VijendraHI Vijendra,
Check out this -
https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=130
<i>2) Is it possible to update FTP parameters at Module Processor level for Receiver Adapter?</i>
You can not dynamically determine the FTP server etc. In the Receiver Adapter, Module is called first, then control is given XI Adapter to output the file into FileSystems. You can modify the Payload.
For more~
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/frameset.htm
Hope this helps,
Regards,
Morothy -
Passing User Parameters through Run_Report_Object
hi,
How to pass multiple user parameters through run_report_object.example i have to pass 20 parameters, have i write 20 statements? is there any way to come in single statement.i am using Forms 6i.
thks in advance,A parameter list can be the second parameter of RUN_REPORT_OBJECT,
rjob := RUN_REPORT_OBJECT(rep_id,paramlist_id);
Gerald Krieger -
Passing Parameters through a URL to a Report..
I have noticed a lot of message about similar situations where people have had problems sending certain parameters through a URL.. so this is maybe something that's not possible.. but you if you dont ask then you dont know.
so..
We have a form that has search options in it
(its a customized form that replaces the customization bit that you get with a report -> .show_parms - just so we could do different things with it)
and one of the fields is a combobox populated by an LOV
- it has usernames in it
so when you search using a value in the combobox it will show all the records that that person has entered into the table..
however we are currently getting an error
Error: An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
this is the URL with the parameters
http://portal.somewhere.com/pls/portal30/foldername.RPT_Edit_Request_Old.show?p_arg_names=Request.RID&p_arg_values='||nRID||'&p_arg_names=Request.CID&p_arg_values='||nCID||'&p_arg_names=Request.ATID&p_arg_values='||nATID||'&p_arg_names=Request.REQUEST_NAME&p_arg_values='||nREQNM||'%&p_arg_names=_request_rid_cond&p_arg_values=%3D&p_arg_names=_request_cid_cond&p_arg_values=%3D&p_arg_names=_request_atid_cond&p_arg_values=%3D&p_arg_names=_request_request_name_cond&p_arg_values=LIKE';
when you remove the condition at the end
the report is displayed (but not customized obviously)
however you can see the value has been picked up from the combobox as it's in the URL in the address bar..
so that bit works fine
any thoughts/ideas/or even solutions! :) would be much appreciated
thanks
Richardactually
nevermind
i got it to work without even knowing :)
the condition was causing the error
and adding a % after the value makes it work -
Is it possible to pass parameters through eventlisteners?
Hello everyone!
Inside a .fla file I have some buttons and each button will tween a different image to the stage. All the images are outside the stage in the same x and y position and I just need to tween the x coordinate.
Now I'm working with an external document class where I'm trying to hold all my functions and I'm stucked with the Tweens. I'm willing to stay away from the flash tween engine and I'm trying to work with tweenLite.
My question is: Is it possible to pass parameters through eventListeners so I can use something like this inside my docClass?
public function animeThis (e:MouseEvent, mc:MovieClip, ep:int):void { //ep stands for endPoint.
TweenLite.to(mc, 2, {x:ep});
If this is possible, how am I supposed to write the listeners so it will pass the event to be listened for AND those parameters? And how to build the function so it will receive those parameters and the event?
If this is not possible, what's the best approach to do this?
Thanks again!So, I understand you need to match buttons with corresponding visuals.
Here is a suggested approach.
Since SimpleButton is not a dynamic class, I suggest you have an enhanced base class for these buttons that extends SimpleButton. What is enhanced is that button has reference to the target.
I wrote code off the top of my head and it may be buggy. But concept is clear:
This is base class for all the buttons:
package
import flash.display.DisplayObject;
import flash.display.SimpleButton;
public class NavButton extends SimpleButton
public var targetObject:DisplayObject
public function NavButton()
Now, this is your doc class that utilizes this new buttons:
package
import flash.display.DisplayObject;
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.events.Event;
import flash.events.MouseEvent;
public class DocClass extends Sprite
private var btnArray:Array;
private var visuals:Array;
// references to objects being swapped
private var visualIn:MovieClip;
private var visualOut:MovieClip;
public function DocClass()
if (stage) init();
else addEventListener(Event.ADDED_TO_STAGE, init);
private function init(e:Event = null):void
removeEventListener(Event.ADDED_TO_STAGE, init);
// buttons and MCs shouldn't be in the same array - otherwise it is counterintuitive
// assuming all the objects are on stage
btnArray = [price_btn, pack_btn, brand_btn, position_btn];
visuals = [g19_mc, g16_mc, g09_mc, g04_mc];
configObjects();
private function configObjects():void
var currentVisual:MovieClip;
var currentButton:NavButton;
for (var i:int = 0; i < btnArray.length; i++)
currentVisual = visuals[i];
// hold original positioin
currentVisual.hiddenPosition = currentVisual.x;
currentButton = btnArray[i];
// set target MC
currentButton.targetObject = currentVisual;
currentVisual.addEventListener(MouseEvent.CLICK, placeObject);
currentButton.addEventListener(MouseEvent.CLICK, placeObject);
private function placeObject(e:MouseEvent):void
// if NavButton is clicked - make new visual targeted for moving in and currently visible object subject for moving out
if (e.currentTarget is NavButton) {
visualOut = visualIn;
visualIn = NavButton(e.currentTarget).targetObject;
else {
// otherwise - move visual out
visualOut = visualIn;
swapVisuals();
* Accompishes visuals swapping
private function swapVisuals():void {
if (visualIn) TweenLite.to(visualIn, .3, { x:0 } );
if (visualOut) TweenLite.to(visualOut, .3, { x:visualOut.hiddenPosition } ); -
How to edit IT Resource parameters??
How to edit IT Resource parameters??
When I go to the IT Resources type definition and open the IT resource, I see correct parameters. But when I open the same IT resource in IT resources tab, I see one parameter missing and another one duplicate.
Can someone explain what is happening. This is really urgent .. please help!!The IT resource type is like a class definition while the IT resource is an instance of class.
It is likely that the it resource instance that you see was defined using an old it resource type definition. Create a new instance and you should get the correct fields.
Hope this helps
/Martin
Maybe you are looking for
-
Can't build SJSE8 project via CLI with asant
I have written a small, simple enterprise app in SJSE8 on Windows XP. The app compiles, deploys, and runs correctly from within Studio. I would like to build the app from the command line. I assumed all I had to do was run asant from the folder conta
-
Free item gets confirmed before main item if credit limit is exceeded
Hi, I am facing an issue,My stock balance is 10000,in sales order ordered main item is 11000 and free items is 1100.IF the credit limit is not activated for the customer means,Scheduled quantities is coming perfect. Now,The customer's credit limit go
-
Dual Monitors with Zotac DisplayPort to Dual HDMI Adaptor?
Has anyone had the chance to try the "ZOTAC DisplayPort to Dual HDMI Adaptor" with the MacBook Pro's yet? http://www.zotacusa.com/zotac-displayport-to-dual-hdmi-adaptor.html I'm currently using a Mini DisplayPort to DisplayPort adapter to connect to
-
What is an ip address and were do i find it?
i am still not able to connect my c4380 all in one printer wirelessly i need my ip address. i don't know what that is or were to find it. i need help.
-
Hi, I have the following code - DecimalFormat dnf = new DecimalFormat("0.000E0"); System.out.println(dnf.format(4999888888L)); the output i m getting is 5.000E9 I want the output to be 4.999E9 (i.e. i want do not the rounding off) how can i do this?