It's 2014 and I am still with iOS 6

I have an iPhone 4s on iOS 6.0.1 and I want to update to iOS 6.1.3 (I'm not a big fan of iOS 7/8) I have watched many videos on updating and I have deleted the last line in the host file but I am still getting 3194. Will it be possible to update at all? Please help if you can. Thanks.

Not to 6.1.3. Your device can only be updated directly to 8.1.2.
(118230)

Similar Messages

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

HT6117 I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

I don't have Safary and facetime after update with IOS 7 my Iphone 4S, and sometimes the Wife is no able.

Howdy syafiqahmad,
If your iMessage and FaceTime still hasn't activated by now, I would recommend you use this specific section of the following article as long as you verify you've done all the other troubleshooting from it for this issue:
If you get an error when trying to activate iMessage or FaceTime
If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
Contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling

Xserve and xserve raid works with iOS 10.9

xserve and xserve raid works with iOS 10.9

For the Xserve hardware:
OS X Mavericks: System Requirements
The Xserve RAID is known as a DAS (directly attached storage) device and provided the HBA card you're planning to use is fully supported in whatever server platform you've chosen (Apple, Microsoft etc) it will be work regardless of OS version.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

How do I clear the bookmarks and history on safari with ios 7 system?

I'm using safari on my ipad with ios 7.02 operating system. I've searched for answers in several places but no one seems to know how to clear the bookmarks and history on safari which show up below the address bar when you type in a new website address. Does anyone know how to clear this out? I've searched several places and others seem to have the same problem.

Click on the bookmark icon > Edit > Create a New Folder and call it whatever you want then
Settings > Safari > Favorites > select the new empty folder you just created.
To clear the history:
Settings > Safari > Clear History
or
In Safari click the bookmark icon > History > Clear

IPhoto deleting issues and iTunes syncing issues with IOS 5 on my iPhone.

While upgrading to IOS 5 my iphone (3gs) would not allow me to restore to back up so I had to restore to original settings, ugh, losing everything on my iphone. Thought this wouldn't be a problem but iTunes won't let me pick and choose what music I want to add anymore even though I have "pick checked music only" checked. It refers now only to full albums, etc, instead of whatever songs I want from each album. I had to create specific playlists with all the music I wanted on my iphone. And it only added one playlist. I have loads of space on my iPhone so don't know what the issue is. Does anyone know why I cannot add more than one playlist?
Also, I discovered I can't delete iPhoto pics on my iphone. I can trash whatever I add to my Camera Roll but nothing else. I had to designate a specific folder for pictures from iphoto to be added to iphone and those I cannot delete. Anyone know what to do here as well?
Thanks!
Found answer to iPhoto question here: https://discussions.apple.com/message/7636294#7636294
...but still need help with music. thanks

It's inside the iPhoto Library package. Open it from the Finder as show in this screenshot:
Then drag the iPod Photo Cache folder to the Trash, close the package, launch iPhoto and try again.
OT

Why is my iMessage and FaceTime not working with ios 7?

I just updated my iphone 5 to ios 7 and it's not letting me use FaceTime or iMessage. It's saying it's still activating. I'm afraid if I reset I will lose everything, but is there any other way to fix it?

Hi there,
both services send a silent SMS (one that is not listed anywhere on your device) containing a configuration request to an Apple server. This server then responds with the needed configuration details. It can take some (from a few minutes to several hours) time for this answer to come. Also if for whatever reason text send/receive is not working properly, iOS can get stuck on the "waiting for activation" message.
Hope this helps,
Chris

I have a laptop with microsoft outlook for work emails, and an ipad (with IOS 7.1) and an i-phone with ios 7.0.6 currently. Since about 2 weeks ago, I now get all spam emails coming to my aple device inbox.

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

CBWFQ and Priority Q Scheduling with IOS

All,
I have a question in regards to scheduling in QoS.
I have below 2 priority queues (both pri quese go into one queue we beleive), and 3 CBWFQs.
The qestion is, how are these queus scheduled. I know that priority Qs will be emtied before moving onto the CBWFQ.
On the CBWFQ side, how are these scheduled, in a round-robin way? or is the amount of time they get serviced increased, the bigger the bandwidth statement is configured (Like custom-queuing and bigger queue configured in terms of bytes equates to more time being scheduled to empty the queue before moving onto the next queue)
policy-map carrier_cos
class carrier_EF
priority
police 1605000 8000 8000 conform-action transmit exceed-action drop
class carrier_AF4
priority
police 1530000 71500 71500 conform-action transmit exceed-action drop
class carrier_AF1
bandwidth 6120
class carrier_bulk
bandwidth 5480
class class-default
bandwidth 15265
Sounds to me like CBQFQ is a mixture of priority-queueing and custom-queuing combined.
Many kind regards for you help with this question.
Ken

Thx for that.
So, if I have a 1M/bit cct and have CBWFQ running.
CBWFQ 1 = Bandwdith 600
CBWFQ 2 = Bandwdith 200
CBWFQ 3 = Bandwdith 200 (class class-default)
assume interface is congested. How does the scheduler work?
Is it, within a time period, (let say 1second) it will spend 600ms servicing Q1, then move onto Q2 and spend 200ms on that queue before moving onto Q3 where it will spend a 200MS servicing that Queue and then go back to Q1?
Correct me if Im wrong, but is that the same as Custom Qeueing?
1 Second is a long time so what timer interval is used.
Remember is a 1M/bps circuit.
Kindest regards, and many thx.
Ken

Hello i have the ipad one and im up dating it with the software up date and it comes up with IOS 5.1.1 and it dose not look like the ipad 2 yet help me find away to make it look like the ipad 2

I HAVE THE IPAD 1 AND I NEED HELP UP DATING IT TO LOOK LIKE THE IPAD 2 OR 3 SO .... I WENT INTO THE SETTINGS AND I CLICKED ON SOFTWARE UP DATE AND IT SAYS IOS 5.1.1 YOUR SOFTWARE IS UP TO DATE SO I GO ON TO MY HOME SCREAN AND IT STILL LOOKS THE SAME SO COULD YOU TELL ME HOW I CAN MAKE IT LOOK LIKE THE IPAD 2 OR 3 ???? THANK YOU

The ipad 1 is not supported by apples latest software updates. The processor just cannot handle the newest ios. Im sure there are various third party apps in the app store to give you more of a look alike ios7 but the first generation ipad cannot be updated due to performance issues.

Anyone experiencing diminished battery life and delayed response times with iOS 5 on iPad 1?

Since installing iOS 5 on my iTouch and iPad, the battery life of both devices has been terrible! Before I could get 1-1/2 or more days use, now I'm down to hours without using the device. . .and I've turned off all of the locations services except, find my phone. Next, I'm going to try turning off the auto time zone setting.
I've also noticed diminished response on my iPad when opening Settings, Notes, etc. --like 10+ second delay before anything happens. I'm really considering restoring my devices back to the older OS.

Downgrading the iOS is not supported. My iPad is a bit slower that it used to be, but I havn't noticed any change in battery life.
In terms of response times you could try closing all your apps completely and then do a reset and if that improves things. To close all apps : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
To reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
For battery life have you done a charge cycle since you updated :
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

When on a call my email and text notification still come through how do i stop this

How do I stop my email and text notifications whilst making a phone call?

Well, Rich, here we are in 2014 and this is still a problem. Apparently, Apple doesn't care what we think about this annoyance.

If I were to buy a new iPad 2/iPhone 4s or 4, would it start out with iOS 5?

I've heard some very bad things about 'legacy' devices running iOS 6. Specifically I hear that when the iPad 2, iPhone 4s and 4 are updated to iOS 6, the battery life is reduced and wi-fi connectivity becomes less reliable.
My question is, if I were to buy a brand new iPhone 4s today, would it come pre-installed with iOS 5 or 6? And if it came with iOS 6, would I be able to get an older operating system?

All new stock should be running iOS6 out of the box by now,
iOS6 works fine on most iOS devices .
Maps app is not an issue in performance
Over the air updates did have a bug with thermal controls making phones hot and battery life fall.
Restoring and updating via iTunes often corrected this.
The wifi issue have read about but have not seen myself.
Circumstantially it appears to be related to early 802.11n draft routers and actually may be router firmware based.

Having the animation issue with iOS 5 SDK generated build

I am working on a enterprise application. I upgraded the xcode 4.2 and generated the build with iOS SDK 5. I observed the strange behavior in the animation of the views. The view are moving horizontally, even though we are setting the frame vertically.
But if I run the app in debug mode, it works fine.
Can anyone please help me?

The following piece of code I am using in my application,
Here pBgImageView is UIControl object.
                    CGRect frame =pBgImageView.frame;
NSLog(@"frame x.o = %f, y.o = %f",frame.origin.x,frame.origin.y );
                    frame.origin.y += (62 + 15);
NSLog(@"frame x.o = %f, y.o = %f, bg.x = %f, bg.y =      %f",frame.origin.x,frame.origin.y, pBgImageView.frame.origin.x,pBgImageView.frame.origin.y );
And the logs I am getting is,
frame x.o = 15.000000, y.o = 88.000000
frame x.o = 92.000000, y.o = 92.000000, bg.x = 15.000000, bg.y = 88.000000
frame x.o = 92.000000, y.o = 92.000000

It's 2014 and I am still with iOS 6

Similar Messages

Maybe you are looking for