IT'S BACK-MDD COOLING AND LIGHTING MODS
A while back I posted a few pics of my MDD 1GHZ. I have since changed a few things. I swapped out my 2 60mm heatsink fans for 1 80mm led. The 60 mms worked AWESOME but I wanted to spice it up, so I got an 80mm with a CFM rate of 35.8 and only 23DLB. So far it seems to work just as good as the 2 60s. I only notice about 1 degree increase. So at Idle I'm right aound 88-91 degrees.
Much better the the 125-130 the temps the " Stock" machine. I also switched the rotation of my front 80. I now use it to remove the hot air from inside. Blowing in just seems to recirculate the already hot air inside since there is not really a good exit on this machine. anywho heres some pics. You can't really tell how BRIGHT red this thing is at night. Boy it looks KILLER.
http://img235.imageshack.us/img235/3356/dscf0124lj9.jpg
http://img232.imageshack.us/img232/8330/dscf0126ss0.jpg
http://img296.imageshack.us/img296/5797/dscf0146ic2.jpg
http://img241.imageshack.us/img241/8040/dscf0125ax6.jpg
If you have windows, reinstall PSE 11 and you can copy over the plugin for it. On a mac, it's gone and that's all there is to it.
Similar Messages
-
I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.
do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?
-
I backed up my iPhone 3GS to iCloud. Activated my iPhone 5 and restored it from iCloud. But iPhone 5 will not backup to iCloud, only to my MacBook. When I try to turn it on on the phone it gives me an error that I must turn on Wi-Fi or turn off Airplane mode. Wi-Fi is on an the phone is talking to the internet just fine and airplane mode is off, but I still get the error. Is this a known problem?
You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly? -
I updated my ipod touch 5th gen to iOS 8.2 and left it but when I got back it was in recovery mode with a red iTunes logo and I plugged it into my computer to reset my ipod and it wouldn't do it what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My computer died when I was syncing music from iTunes onto my iPad. I can reset it and get it running, but I want to get back my photos and videos. How do I get back photos and videos in recovery mode?
Clucktastic wrote:
How do I get back photos and videos in recovery mode?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My mac randomly turned off last night had some trouble with an uncertified usb cable that I was trying to charge my iphone 5S with but it came up with that message of not being able to charge with this accessory or something so i plugged it into my mac thinking it was my plug to charge my phone then like 5 mins later my mac just randomly turns off and it did have like 90% batt but i still plugged it back in thinking it was just being wierd but then i pressed the power button after it being plugged into my mac and it wouldnt even turn on no fan starts or anything and now the colour of the charger light is very faint and is almost flickering between green and amber, please help me out I dont want to pay loads of money for something that I might be able to fix?!?!?!
I actually just fixed it. Here is what to do;
1. Unplug everything from your computer.
2. Take off the bottom of your MacBook / Pro / Air. (There are usually 3 screws that are longer than the rest near the vent, remember where they go.)
3. Carefully unplug the battery from the logic board.
4. Wait 10 seconds.
5. Plug the battery back into the logic board.
6. Put the bottom cover back on.
7. Reboot the computer holding the "Option" key.
It's not exactly what I did but it should work. If it doesn't work, what I really did was unplug the battery and then plugged my charger into the computer, the fans started spinning and then it shut off again. Then I plugged the battery back in, put the bottom on (with no screws), and tried booting up again. The Apple chime played and then the computer shut off. So I tried booting again holding the "Option" key and it booted up like normal. I then restarted my computer to make sure it is back to normal and it is.
Wow what a relief. I was really scared there for a minute.
*And for everyones information I was using a Belkin USB cable but it had never done that before. -
Please somebody help me !!!! I just got back from Paris and Israel and this update got my iphone 5 in recovery mode. I can't loose all my pics and videos from my vacations ??????????????????????????????????
NOO it's not broken it is a software error. What you need to do is put your phone into what is called DFU mode or Device Firmware Upgrade Mode. What you have to do is connect your phone to itunes but do not start the sync process. Ignore any popups from itunes initially. When you are connected to itunes take your phone and hold down the home button and power button at the same time. Hold them down for about 30 seconds or so and you should see your device screen rollover to the black screen and disconnect from itunes once this happens it will reboot and automatically connect to iTunes, after this happens start the restore process through itunes and it should continue past the error message.
* Also before you do this try ejecting your sim card if you have the at&t model if you are on Verizon ignore this. There is a small oval port on the right side of the phone with a small pinhole. Use a paperclip and insert it into the hole, the door will pop open. Take the door out, remove the sim card and wait 5 minutes then return the sim card back into the phone and begin the above process.
If none of this works you may just want to bring it the genius bar and have them look at it. Good Luck and I hope this helps! -
HT201210 I doesn't back up my iphone 3g and it stuck on restore point and recovery mode in itunes
I doesn't back up my iphone 3g and it stuck on restore point and recovery mode in itunes.
Hold the Home + Power button simultaneously for 10 to 30 seconds. Your device should boot into it's original state. If it doesn't, put your device into DFU mode (Google/Youtube how to do so.), and restore your device.
-
My iphone 4 back side names and logo light how to change panel
my iphone 4 back side names and logo light how to change panel
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
my iphone 4 screen went black and will not show anything on it, the phone still vibrates and lights up but the screen is black, HELP.
I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.
-
My Lacie hard drive back up is not showing up and light is flickering
My back up hard drive is not showing up when i plug in the USB to my Macbook Air so won't back up. The light on the hard drive is flickering. CAn you please help?
A: does it show up in disk utility?
B: try a different USB port.
C: If no go, try a different Mac.
D: If still not recognized then its about 90% likely the SATA bridge card inside the USB enclosure is bad....NOT the Hard Drive itself, but the SATA bridge card attached to same.
Is your Lacie a conventional HD or a SSD? (LaCie does NOT make hard drives, internal conventional HD are Seagate inside a LaCie)
If its a conventional HD
A replacement HD enclosure will solve same, ($15 ebay). The Sata card removes from the HD very easily, like LEGOs attached together come apart.
Verify A thru D first before doing anything.
likely bad part pictured below, the SATA card, ... as seen INSIDE a USB external HD -
MSI GT70 2PE Pro Shuts off after power up and sleep mode, then works
I got this laptop less than a year ago and I am kinda getting upset about my decision buying it. It is the GT70 Dominator Pro with the GTX880M graphics card.
Only thing I did was install a SSD drive for my main drive and use the 1TB drive that it came with as a storage drive. Everything was working perfectly for about 4 months without any issues.
My problem started with the laptop shutting off in the middle of playing Watch dogs and wouldnt boot to windows, so i went to the BIOS and found out for some reason it changed my primary drive to the storage so i changed it back and all was good. After about a month it similar thing happened but this time I couldnt even get to the BIOS, after pressing the F10 or whatever it is for BIOS the computer freezes in a black screen.
I contacted MSI and sent it out for warranty, they had to change the whole motherboard as it was not serviceable (Issue was a faulty MB).
Last week the laptop started acting up again, here is my issue. When powering it on the fan and light comes on but after couple of seconds it turns off, then powering it on for 2nd time it works. This happens 80% of the time, i have to turn it on twice before it works. Even more frustrating thing is when it is at Sleep mod, I press the power to wake it up, so it does but before getting to windows screen it shuts off.
I was wondering if anyone have similar issue like mine or know what could cause this. My tower PC that i built have a MSI board and graphic card thats why I went with their laptop but I had pretty bad experience with it so far and its not a cheap laptop either. I might have to go through another warranty work if it keeps giving me the issue.Try update IRST driver.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24006 -
Can I sample a layer's "true" color despite its opacity and blend mode?
I'm doing some painting with a lot of layers set to different blend modes. I find that every time I want to paint on one of these layers, I have to go to that layer, set the opacity back to 100, change the blend mode back to "normal" sample the color, then change everything back and continue painting. I realize I can save a swatch for the color, but it can get confusing when you're using subtle color differences on multiple layers. It seems like there should be a modifier key to the tool that samples the layers "true" color discarding opacity and blend mode. Does this exist? Thanks!
Perfect! This is exactly what I'm looking for chris....I don't suppose there's any way to toggle the tool's "current layer/all layers" functionality on the fly so i don't have to go to the tool and select which mode I"m in each time is there? I usually access this tool by just hitting "option" while using a brush. Would be cool if i could set "Option + shift" to use the eyedropper in "current layer" mode. Thanks for the speedy reply!
-
Problem #1.
The first top bar has a firefox logo at upper left corner and the words "Ask a Question/Mozilla Support-Mozilla Firefox" are on the logo's right side. The first top bar has minimize, overlap and close buttons at the upper right corner. When I click on the logo, a short menu drops from it, which has choices like "restore"..."close".
The second top bar has the word "Firefox" at the upper left corner with a downward arrow beside it. They look like white letters contrast to the orange background of a huge button. When I click on it, a double paned menu shows up. It has many choices such as new tab, new private window...bookmarks, history, download...exit. The second top bar also has minimize, overlap and close buttons at the upper right corner, too. There are 7 word titles "file, edit, view, history, bookmarks, tools and help" below that huge orange button at the upper left corner. The logos and the address bar are below the 7 words.
I don't need 2 top bars. They occupy too much screen property.
Problem #2
The BACK button doesn't light up and cannot work on many web pages.
Thank youIt sounds like there is either an application or an extension of Firefox that is causing this problem.
You can launch Firefox in Safe mode to try and identify problems: http://mzl.la/MwuO4X
Also, this article might be of interest to you: http://mzl.la/NjT73w
Additionally, you can try and do a soft reset of Firefox if you are not able to solve this problem: http://mzl.la/MnSTZB -
Lockups caused by Cool and Quiet?
Since a few months, I have a MSI K8T Neo2 FIR motherboard with an Athlon64 3200+ (Venice) CPU, equipped with 2x512 Mb dual channel memory. No overclocking or any non-standard BIOS-settings; BIOS version 9.1. The system works great, but for one thing: I had frequent lockups...
After some time, I started noticing that my lockups occurred only when the system (running Gentoo Linux) was not doing very much (idle, or only doing some browsing with Firefox). Because of that, I started suspecting that my Cool and Quiet-setup had something to do with it: the lockups occurred when my system was running at 1000 MHz, never when running at 2000 MHz. Since I turned off Cool and Quiet (in the Linux kernel, I didn't touch the BIOS-settings) a week ago, I haven't had a single lockup, even though I've kept my computer running 24 hours a day mostly. So I guess my guess was right.
Can anyone explain what exactly is happening? Why is my system less stable when in 1000 MHz than in 2000 MHz? Can I do something to make the 1000 MHz-mode stable and return to running Cool and Quiet?hi,
i have the same problem with the same chipset. (even if its another mb)
your post has been a big hint because after my lockups occured i tried to reproduce them with system/cpu torture tests but have not been succsessful. after that i declared that my system has been miraculously cured and went back to normal (i.e. mostly idle) usage and. bang, lockups again. so i disabled cool'n quiet for now and will see if that helps.
raoulst
Maybe you are looking for
-
Using a variable in netsh command to set ip address on NIC
hi friends i wrote an script which gets an input & use that variable to set ip address on NIC. but actually it doesn't set ip address. may you please help me. my script contains: $VMNumber=Read-Host "please enter your VM number (for example 2)" Netsh
-
Data is not updating in DB Table
Hi...All we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Databa
-
Trying to add data to phone with money already on my accout how do i do it
trying to add data to my phone with money already on my account how do i do it
-
Purchase Transferring to Another system
I wonder if I can transfer my PS4 purchases to another PS4
-
Subject : Problem with Virtual key figures for one scenario.
Hi Gurus, I have implemented Virtual Keyfigures for my Bex report and it is working perfectly bUt for one scenario. If i give PLANT and MATERIALS in the selection , The report calaculates the Virtual keyfigure value correctly But if i give Only PLAN