It's dos't work Launch Monitoring & Report Viewer

It doesn't work "Launch Monitoring & Report Viewer"
If i click Launch Monitoring & Report Viewer" , that 's show up " The monitoring and reports database is currently unavailable. Attempting to reconnect in 5 seconds. If problem persists, please contact your ACS administrator " this message...
where do i check on ACS 5.0 ?
Regards
Gangmo.

ooooops..
reload the acs.. and database process is on..
It work well ....
Thanks...

Similar Messages

ACS 5.1 "Launch Monitoring & Report Viewer" not working

I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's trying to load is this: https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
Any insight would be appreciated.
Thanks,

I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
Let me know if you can apply patch here is the link for that :
http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
here is the procedure to apply patch 3 ( on both primary and secondary)
downlaod the file : 5-1-0-44-3.tar.gpg
and place the file in the FTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
then run this command :
acs patch install patch-name.tar.gpg repository repository-name
#Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Thanks
Waris Hussain.

Launch Monitoring & Report Viewer URL

Hi,
is there a way to change the URL of Launch Monitoring & Report Viewer? I want to use the IP address of the ACS 5.2 and not the hostname.
thank you
Fabrizio

HI Sebastian,
What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
Supported Web Client/Browser Platforms
ACS 5.1 supports the following Web Client/Browser Platforms:
•Windows XP Professional (Service Pack 2) and Windows Vista
–Internet Explorer version 6.x
–Internet Explorer version 7.x
–Mozilla Firefox version 3.x
•MAC OS 10.5
–Mozilla Firefox version 3.x
•Linux ReaHat (latest version)
–Mozilla FireFox version 3.x
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
Regards,
Steve.

Cannot launch Monitoring & Report Viewer

Hi everybody,
i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.
Everything works fine except for the "Monitoring & Report Viewer"-Tab:
When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.
I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
Am i missing something? Did anybody experience the same issue?
Thanks in advance,
Sebastian Jessulat

HI Sebastian,
What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
Supported Web Client/Browser Platforms
ACS 5.1 supports the following Web Client/Browser Platforms:
•Windows XP Professional (Service Pack 2) and Windows Vista
–Internet Explorer version 6.x
–Internet Explorer version 7.x
–Mozilla Firefox version 3.x
•MAC OS 10.5
–Mozilla Firefox version 3.x
•Linux ReaHat (latest version)
–Mozilla FireFox version 3.x
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
Regards,
Steve.

OBIEE 10g - Unable to see data in the report view with grand total applied

Hi,
We're facing with a strange issue.
We're working on a report view.
We're able to see data when Grand total is not applied on the report. The moment Grand Total is applied, it's showing either an empty table with NULL values or "No Results" page.
Please help.
Thanks in advance.
-Rama

Hi Dpk,
Thanks for your reply.
I included it in the instanceconfig.xml, but the issue still exists.
Couple of Observations
#1 - We noticed this issue when we drill down to the level which has really sparse data.
It works fine when we look at the enterprise wide report.
#2 - Works fine with few dimensional attributes and facts on the report
When we add a fact that doesn't have any value at that level, the issue starts to appear.
Thanks in advance.
-Rama

Only showing APP monitoring Reports in SCOM 2012 Reporting

Hi all,
Recently i upgrade the SCOM 2012 from 2007 R2 Managament Server only because in previous environment we have only one MS server and SQL server 2008 SP2.
Now i have 4 servers for SCOM 2012.
1) SCOM Managament server (which was upgraded)
2) SQL server 2008 SP2 (running 3 instances)
3) SCOM ACS server (New installation)
4) SCOM Reporting server (New installation)
I have using two accounts
1) SCOM.action 2) SCOM.sdk
When i install reporting, reporting Tab are showing in the SCOM
2012 console but only Application monitoring reports are showing in Reporting. I was deleted some MP’s and then import it but the report are not imported in reporting tab. I also check SSRS, it works fine. Both SSRS url’s works fine.
I don’t know whats the problem.. Please clarify me what’s the problem.????
Regards,
Kamran

Hi Muhammad,
I am also facing the exact issue as expalined above.
Even the application monitroing reports are not working. When i try to launch application monitoring reports from reportmanger , I get dataset error and see that apm.* views are missing.
Also tried deleting and importing the managementpacks, without any success. This issue is happening only in production environment.
It will be very helpful if you can let us know what Account permisisons need to be checked for. Thanks in advance.
Thanks

Cannot launch Java Report Panel

I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan

I am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you.

MRP-Vendor Monitoring Report

Hello,
There is a need of vendor monitoring report from my client.
Here is the detail of the report need:
Its a report ,that will be used by MRP controller and expidetators to track vendor for the critical items
These critical items are the one ,which are due for delivery and with stock quanity going negative ,so these expidetors followup with vendors to make sure the delivery happens on time ,before negative stock situations
Note:Expidators ,wont take receipts into account ,during this period calculation of negative stock
Let me know ,if there are any questions ?
thanks,

Rajen,
True,its a report to monitor vendor delivery based on exisiting stock situation
So basically ,first understanding existing schedule from vendor ,we can get the expected delivery date,
based on which we need to keep run date as reference ,and calculate next 5 daily available capacity and list the same ,by excluding any receipts in b/w.
I have given descrption of the requirement in my earlier comment,the reason for asking the same is to confirm if someone has already worked on such scenario ,and can guide the report map in right direction.
Please read my earlier post again and provide any valuable reply
Regards,Srinivas

Unable to configure monitor & report in Lync 2013

We have SQL Server 2012 in our environment. I want to enable monitor report in Lync 2013. i have separate Lync sql instance.
I am trying to configure new database in Reporting Service Configuration manager in report Server database Configuration wizard.
while testing connection getting below error.
could not connect to server:A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to
allow remote connections.(provider:Named Pipes provider,error:40-could not open a connection to SQL Server)
kindly help to resolve issue.

In my opinion, if you have problem with your firewall, try disabling it and connect. If it doesn't work, means it could be your SQL configuration / enabling of TCP/IP problem.
Check the below blog:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
If you are able to connect to SQL Server by physically logging on to the server, but unable to connect from a client computer then execute the below to check the SPN.
-- run this command to see if SPN is not found
EXEC xp_readerrorlog 0,1,"could not register the Service Principal Name",Null
If the SPN is not found setup and register an SPN. (https://msdn.microsoft.com/en-us/library/ms191153(v=sql.110).aspx#Manual)
Tek-Nerd

Including a new Process Monitor Report

Hi all
I was wondering if by adding a new kind of report on the workbench under Process Monitor Reports (default reports are : Process Monitor, Process Monitor with Locks, Process Monitor All Categories, Process Status Period Range, Process Monitor Sorted by Location Hierarchy) I could modify the information showed by this "new report"
For example currently if I generate the Process Monitor with Locks it will show every single location I have within my application, however I need this "new report" to show only some of those locations filtered by an attribute, I supposs the correct way to do this is to locate and modify the script being called by the adapter to publish this report. The problem is I can't find this so called script.
Am I wrong and this publishing process is being done through an already compile library, a .dll ?? If this is the case is there anyway to override this call ??
I hope I made my problem clear enough
Thanks
Edited by: HFMColUser on 26-ago-2011 15:41

Hi,
Login to FDQM (FDM) work bench client and click reports tab.
Copy the report you want to modify and paste (I prefer to do this way, so we will not create any issues in the existing reports)
change the report description.
Right click on the report now. Clcik report definition properties, Click SQL tab on the top.
Now add vpartcatpercartesian.partname like 'E%'. so you will get only locations starting with E in your report.
Edited by: PadmajaV on Aug 27, 2011 3:15 AM

Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL

Hi, I am deploying the monitoring reports in a single host different to FE or Backend
When I launch the wizard the installation fail with the message:
> Deploying Monitoring Reports... This might take a few minutes.
The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
The data source is using SQL instance "(local)\ARCHLYNC2013".
System.Runtime.InteropServices.COMException (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
Reporting Services.
I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
Somebody else have this problem.
THX.

Hi Lapatinogo
This is how I install Monitoring in my lab series.
http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
Navigate –> Lync Server –> Your Site –>
Lync Server 2013 –> Standard Edition Front End Servers –>
Your Server
Right Click –> Edit Properties –> Scroll Down to Monitoring
Tick Monitoring –> Press New –> Enter your
SQL Server FQDN –> Specify your instance –> Untick
This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
OK
Press OK –> Press Action –> Press
Topology –> Press Publish
Press Next
Press Next –> This should complete successfully –> Press
Finish
Launch Lync Deployment Wizard
Press Yes –> Click Deploy Monitoring Reports
Press Next
Press Specify a User Account and Password that has rights to the instance –> Press Next
Press Specify User Group (I will be using the default group) –> Press
Next
Press Finish
Launch the Lync Server Control Panel
Login with an account that is apart of the CSAdministrator
Click View Monitoring reports –> Click your SQL Server FQDN
You should now see the below window Successful deployment of Lync Monitoring

My iPhoto dose not work from 0:00 Sunday. I was deleting and downloaded again but dosn't work! Why?

My iPhoto '11 dose not work from 0:00 Sunday. I was deleting and downloaded againg but the problem is same.

Sorry but we need more to go on thatn it does not work
what happens? what does not happen? what error messages to you get? if it crashes post the first 50 lines of the carash report
LN

Some Monitoring Reports Are Blank

Hello,
We have deployed monitoring reports for Lync 2013 on SQL 2012 mirrored back end database servers. When I try to open any reports under System Usage Reports, the report is blank. For example, if I try to open report called "User Registration
Report", it is blank. However, if I open any reports under "Media Quality Diagnostic Reports" like "Server Performance Report", it works fine. So, just wondering why I don't see any data for reports like "User Registration
Report". The SQL account I'm using has full sysadmin role on the SQL server. Thanks.

Hi,
Please check if FE server have MSMQ with Directory Services integration installed to complete the message chain between FE and Monitoring server.
Here is a similar case may help you:
http://social.technet.microsoft.com/Forums/lync/en-US/6dfeaaf7-10e6-407c-a8e3-7485f210139b/lync-monitoring-server-empty-reports
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problem with Crystal Report Viewer and Dual Monitors

Post Author: jtgoff
CA Forum: .NET
Hey Guys,
I'm running into another problem with the Crystal Report Viewer. Here's a little info before I get started, I'm developing a Windows App using WinForms in VS2005 and Crystal 11 Release 2. I'm referencing all the latest Crystal dlls from Service Pack 2 of Crystal 11 Release 2. The problem occurs when I drag my Windows Form that contains a Crystal Report Viewer onto my second monitor and try to scroll or resize it, when I try this the Report Document within the Viewer becomes glitchy, blocky, and un-readable. I drag it back onto my main monitor and perform the same actions and the Report appears perfectly fine. I notice this occurs after a number of Report Previews through my App. Initially when I start my App, I can drag the reports onto my second monitor and resize it and scroll through it no problem. However, after a number of Previews, I notice the problem occurs on my second monitor. This is a very strange bug that doesn't produce an error and appears to happen randomly. I was wondering if anyone has come across this problem, if so... Is there a solution for this?
Thanks in advance!

You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
It works awesome and even works on dynamic parameters!

Monitor reports wrong version for NetWare

We're all at 8.0.1 for all our agents now.
However, Monitor reports that on NetWare, it's 8.0a
But if it's on Linux, it's 8.0.1 being reported.
I'm assuming it's a bug?

Welcome to GWMonitorland. It has reported it this way since GW7 and perhaps 65. Two of my biggest problems with Novell is their naming and versioning.
Here is how 8.0 SP1 or 8.0.1 is reported: on the Netware console, the GW NLM modules shows as version 8.00.01. On GWMon, it's (as you see) 8.0a. On the Console screen, 8.0.1. If you're not on a major service pack (e.g., hp2ftf1revdbeta900000), then you're better off paying attention to the date of the .exe, .nlm, or script. The minor revs often show as the main version when queried (e.g., 7.0.2hp3 will show as simply 7.0.2). As you can tell, there's an overall lack of consistency when it comes to reporting versions as to what you think you've loaded and what certain pieces may report as the running version.
So to more directly address your issue, this is "working as designed" as best I can tell. 8.0a = 8.00.01 = 8.0.1 = 8.0 SP1. If this is not working as designed, it's been broken for years.
/minirant
Aaron

It's dos't work Launch Monitoring & Report Viewer

Similar Messages

Maybe you are looking for