It's in, it's FAST!, and I can't find it in "About This Mac"...
Greetings all,
I just got my SATA card and HD installed and now I have a question. I've been scrouning around in about this mac but can't find the drive info. Anybody have any ideas? It's there and it works but no info. For all I know this is typical but I'd appreciate any advice anyone has.
Cheers,
Chris
G4 466 Digital Audio 1.5 gB RAM Mac OS X (10.4.6) Pioneer DVR-111DBK, FirmTek SeriTek 1V4, Hitachi 500GB SATA II HD
look under scsi devices under the profiler.
Some SATA controllers use the same chipset as their scsi counter parts.
That is where my Acard SATA controller shows up.
Similar Messages
-
the InitCVIRTE function is not listed in the NIDAQ function reference online help? Why? and what does she do?and where can I find a description of this function? Can i use this function with visualc++ 6.0?
The InitCVIRTE function is in the CVI run time engine (cvirte.dll)..not part of NI-DAQ.
Applications written or using CVI may call this function..
How are you running into this ?
From the CVI help...
This function performs initialization of the CVI Run-Time Engine. It is needed only in executables or DLLs that are linked using an external compiler. Otherwise, it is harmless.
It should be called in your main, WinMain, or DllMain, function. The parameter values you should pass depend on which of these three functions you are calling InitCVIRTE from. The following examples show how to use InitCVIRTE in each case.
If you are using main, your code should be as follows.
int main (int argc, char *argv[])
if (InitCVIRTE (0, argv, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are using WinMain, your code should be as follows.
int __stdcall WinMain (HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpszCmdLine,
int nCmdShow)
if (InitCVIRTE (hInstance, 0, 0) == 0)
return -1; /* out of memory */
/* your other code */
return 0;
If you are creating a DLL, you must call InitCVIRTE and CloseCVIRTE in your DllMain function, as in the following.
int __stdcall DllMain (void *hinstDLL, int fdwReason,
void *lpvReserved)
if (fdwReason == DLL_PROCESS_ATTACH)
if (InitCVIRTE (hinstDLL, 0, 0) == 0)
return 0; /* out of memory */
/* your other ATTACH code */
else if (fdwReason == DLL_PROCESS_DETACH)
/* your other DETACH code */
CloseCVIRTE ();
return 1;
NOTE: The prototype for InitCVIRTE is in cvirte.h, not
utility.h.
NOTE: In CVI 4.0.1, this function was expanded from one to
three parameters. Executables and DLLs that were
created using the one-parameter version of the function
will continue to work properly.
/*-------------------- Prototype ---------------------*/
int InitCVIRTE (void *HInstance, char *Argv[], void *Reserved);
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team -
I was wondering if I could reinstall Airdrop. I accidentally deleted it and I can't find it anywhere on my Mac! It disappeared when I tried to drag it on my desktop.
Thanks Niel, but I don't really know what you mean. Sorry, but if you can, would you mind adding more detail? I'm really thankful for your help though!
-
I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.
Get in touch with support if it doesn't show up on your Adobe account.
Mylenium -
I have not replaced or manipulated the logic board (or any other hardware) on my mid-2012 13 inch MBP. Under the "about this mac" tab, the serial number is no longer displayed (it now states "unavailable") and the model year is also no longer displayed. I understand that I can find the serial number and model year several other ways, I am seeking to determine why this happened and if it could indicate further problems.
Has anyone else experienced this?
Thank you in advance for any help or insight.
JBMan oh man. What a day. New symptoms again!
Lets start with the MBP dying in its sleep. I closed my MBP and left it for a few hours to come back to find it completely dead. Looked into this issue and with the help of the activity monitor cleaned up some things, turned off some sharing settings, got rid of some extensions, etc. Seems to have solved this issue.
Later on, I picked up my MBP while it was on with my left hand and the same display (horizontal lines), freeze, auto shutdown happened. Out of curiosity I tried to recreate the symptom. Sure enough, pressing (with little force) on the left side of the bottom case caused it to happen again. I researched this a bit and found several possible culprits (bad logic board, metallic sticker may cause shorts, bad RAM bank, google drive). The google drive one really surprised me, I removed google drive (worked for many people) and it did not fix the issue. A buddy had some good RAM for me to use today so I swapped it out and had the same issue. Decided to test the individual RAM banks and it turns out that the deepest bank must be faulty. Running with only one 4 gig stick in the outermost bank and the freeze, shutdown, beep issue is gone!
So, it seems I have fixed the dying in sleep problem and have a temporary work-around for the bad RAM bank. The SN issue remains.
I am going to try to find out what could make a RAM bank be faulty and if there is a way to repair it.
What are the chances that all this happens as soon as I try to find out why the SN is unavailable??
Below is the thread that I found interesting and useful.
2011 Macbook Pro 3 Beeps/Freeze -
File History split 1 gig file in to 5 200 meg files, and I can't find how to restore this file
I setup file restore on a Windows 8 computer.
Backed up all the files to a NAS.
Wiped and reloaded 8.1 pro and did a file restore.
All of my files, except one large file, restored.
The file that didn't was a 1 gig TrueCrypt (VeraCrypt) file in the root of "documents".
When I browse out to my NAS, I see 5 files.
One of them is named: TCvol (2014_12_09 02_17_05 UTC) and it is 200 megs.
I believe these 5 files need to combine themselves again to restore my original 1 gig file, but I cannot find any documentation.
Pretty much everything shows that you open file history restore and your data should appear there.Hi,
It should be caused that Windows Server Backup cannot recognize the encrypted file - I cannot confirm how the third party application (TrueCrypt) work, it seems that it will split an encrypted file into several files and Windows Server Backup only restored
files physically. You can contact TrueCrypt support about this issue.
I searched on your website and found several threads which related to get TrueCrypt working with Windows Server Backup. Specifically to your current issue you can confirm with them about any suggestion to get file recovered or how to do such backup job for
a healthy recovery.
https://veracrypt.codeplex.com/discussions/581529
https://veracrypt.codeplex.com/discussions/577924
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I purchased photoshop Elements 12, downloaded it and I can't find the icon on my Mac.
I purchased Photoshop Elements 12, downloaded the dmg version, and I cant find the icon on my Mac.
Go to
/Applications/Adobe Photoshop Elements 12/Support Files
and double click on the
Adobe Photoshop Elements Editor.app
then to keep the ps 12 editor icon in the dock so you can start it from there, right click on the pse 12 icon in the dock and under Options, click Keep in Dock -
I understand that iTunes Radio is only available in the UK, but now that I am back in the USA I can't find the button anywhere.
nbrebol wrote:
I understand that iTunes Radio is only available in the UK, but now that I am back in the USA I can't find the button anywhere.
iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085 says
iTunes Radio availability by country
iTunes Radio is available only in the United States. -
Thank you anyone for the help.
The new format of what?
If you're running iOS 6 and want to dowonload updates directly to your iPhone, you can open the App Store and click "Updates" in the lower right and install them from there.
If you're talking about iTunes 11 on your computer, then switch to the Apps button on the upper left and you can download them from there. -
iPad 2 with iOS 7.01 After the last backup to Icloud, unrequested by me, my calendar has been filled with public holidays of the UK which there doesn't seem to be any way of deleting. Also, I have been trying to delete a birthday from the calendar for months, this time using all variations of 'delete' and it keeps popping up again!
Are you also restoring from your backup? That sounds like what is happening or someone else has your Apple ID.
A backup to iCloud would have no way to add UK holidays to your calendar. Open Calendar, tap on Calendars at the bottom middle of the page and untick the ones you don't want. -
My Pro makes a low beeping sound once in a while and I can not find the source to this.
Can anyone help? This beeping sound is really annoying.
No, its just running, only things open are Safari and Mail.
-
My screensaver preference was set at showing the last 12 months of iPhotos on my Mountain Lion. Just updated to Maverick and now it shows "no photos." Tried to reset, but it does not give me the option to personalize using my iPhotos as an option to do so. I do not want to use what Apple has chosen, but want my pictures. How do I get this back?
You need to upgrade to the latest 64 bit Mavericks optimized, compatible version of iPhoto.
Older versions of iPhoto will no longer work under OS X Mavericks.
What will happen is that the new iPhoto library will be updated to work the new version of iPhoto an Mavericks and the updated iPhoto library will no longer be accessible to older versions of iPhoto or older versions of OS X.
If you want to be able to access the current configuration of your Libary with older version of iPhoto an older versions of OS X, then you need to create a copy of the IPhoto lIbrary and move this copy to another location
You can save the duplicate iPhoto Library anywhere on your Mac's internal hard drive.
I created a new folder in my Home folder/directory called My Photos and stored the duplicate iPhoto library there along with other images I didn't want to be in iPhoto.
As long as the copy of the iPhoto library is made before you let the new version of iPhoto convert it, it will still be intact for older versions of iPhoto and OS X to access at some future date, if needed. -
How can I apply drop shadow effects to graphics and pictures? It was very easy in previous versions of Final Cut and I can’t find it. Thanks
Try this one, works marvelous:
http://www.rippletraining.com/using-the-rt-drop-shadow-in-final-cut-pro-x.html
Regards
Nolan -
Hi there
I bought Mac pro OSX 10.9 yesterday. Now its trackingpad does not work does not double click.
Also I could not open finder' preview' downloads' about this mac' and so on.
The arrow shows a crounding olorful circle as said you have to wait. But nothing happens.
Really disappointed
Many thanksSorry to hear you are having so much trouble. The good news is you can return it within 14 days of purchase for any reason. Return it and have them give you another.
-
I can't put numbers on the decimals. It only allow ,00 as decimals. If i put 33.00 it's ok but if i put 33.44 when i press enter changes to 3344 as an entire number, i've try everything and i can't find the solution. This should be a basic thing. How frustrating !!
pedrofromsydney wrote:
€ 55,555.00
that's the result i get. Still why can't i just type for ex. 29.55 and stay like that on the cell ? Why does it always change to 2955 or 2955.00. ??
I don't understand this
It appears you have the cell formatted to Currency, with the default two decimal places.
What I don't understand, though is how Numbers arrived at a result of fifty five thousand five hundred fifty five on your entering the exact keystrokes in Yvan's post:
an equals sign, followed by five ones, followed by a forward slash, followed by a 2.
Here's the result I get:
Could you do the following:
Open a NEW Numbers document using the Blank template.
Drag the Row and Column control (bottom right corner) to reduce the table to two columns and three rows.
Enter the words "My table" in cell A1.
Click on cell B2 to select it, then enter the formula
=11111/5
Use only those eight keystrokes; do not include any commas, periods or other characters not shown.
Click on B2 again to select it.
Open the inspector and choose the Cell Format button.
Do not make any changes in the Inspector window.
Drag the Inspector window to the position shown in my screen shot.
Take a screen shot that includes the Formula bar, the Table (with cell B2 selected) and the Cell Format Inspector pane (the same screen area as in my screen shot above).
Post the screen shot in a reply to this post.
I'm hoping there will be some clues as to what's happening here in the screen shot. Procedure for taking and posting a shot of part of the screen follows.
Regards,
Barry
SCREEN SHOTS (Selected area)
Place the mouse pointer at the top left corner of the area you want to include.
Press shift-command-4.
The mouse pointer will change to a plus sign on a circle.
Hold down the mouse button and drag to the bottom right corner of the area you wan to capture.
Release the mouse button.
The screen shot will be saved to your desktop with the name "Picture 1" (The number will be different if you have taken other screen shots).
POSTING
In the Compose frame, place the Insertion point at the location you want the picture to be inserted.
Click the camera icon above the compose frame to open the Insert Image dialogue.
Click Choose file to open the Choose dialogue.
If necessary, navigate to the Desktop and click on the 'by date column header to sort the files by date, most recent at the top.
Select the most recent picture file.
Click Choose.
Wait for the picture's file name to appear beside Choose file.
Click insert image.
Done.
B.
Maybe you are looking for
-
Table for PO Discount Payment Terms
Hi Experts, I want a report which contains the PO numbers which are having Discount Pyament Terms only. Please suggest from which table can I get. Thanks in advance. Regards, kris.
-
recently I have received a dialog box warning that an unauthorized update to Firefox has been blocked. There are instructions to notify my administrator. I have been having trouble over the past few days with the RX rate being very low and stopping.
-
Moved iTines directory to my home computer, installed 6.0.42- no library
I've moved my iTunes directory from my work computer to home, installed the latest iTunes (6.0.4.2) on XP Media Center Edition. The first time I laucnhed itunes, everythign was ok, I could play my songs. I've launched it today, and suddenly no librar
-
Hi this is nauman , and i want a tool or API which can convert or help to convert Html directly into the XML .. so plz tell me about this tool JTIDY, whether it converts HTML directly into XML or not.. Regards. Nauman
-
Smart folder 'ANY' criteria does not work
I don't need to use this very often, but have just tried to and it simply does not work. For example, I have many emails containing the word 'cat' and many others containing the work 'dog'. If I create a smart folder searching the entire messages for