It's my PSU enough for the K8N Neo 4 Plat. Sli

I have an Nspire PSU 450W
+12 25A
+5 40A
+3.3 28A
It is enough for...
K8N Neo 4 Platinum Sli
AMD Athlon 64 3500+
MSI NX6600GT-TD128E
PCI Video Capture card
Zalman Ultra Quiet CPU Cooler
HD SeaGate Barracuda 120GB
CD-ROM
DVD/CD-RW
??????????????????????????

Dude, if you're even thinking about SLI on your new K8N Neo 4 Platinum SLI mobo, you should forget about that Aspire PSU (unless you want to fry everything in your Rig) and bite the bullet and get a PC Power and Cooling Turbo-Cool® 510 SLI (510W) http://www.frozencpu.com/psu-151.html.

Similar Messages

Quick Question MSI K8N NEO 4 PLAT SLI

Hey guys,i am new to this forums just needed some help, i am about to purchase a:
AMD 64 3000 VENICE
LEDTEK 6600 GT PCI EXRESS GDDR3
CORSAIR VALUESELECT 1GB RAM DUAL CHANNEL
MSI K8N NEO 4 PLAT SLI
EPOWER 450 WATT PSU
i was wondering woud i need to update the bios 1st or will the stock bios that comes with the motherboard will work with the venice. I am getting all these parts from Zip Zoom Fly, accept the PSU. Thanks for your help.

Quote from: Dream_true on 28-June-05, 08:14:40
Only BIOS 1.4 and above support Venice & San Diego. However BIOS 1.4 has shut-down issue with RAID. It is suggested that you let your reseller help you flash BIOS to the latest version 1.5. After flashing BIOS, Loading Optimized defaults is needed of course. Good Luck!
Support new features in that cpuid yes. But that is not the same as you are not able to boot/post your system
with an earlier bios .
I booted up a venice on a K8N Neo2 with an aged 1.3 bios (with no venice SD support) just fine .
If the bios supports 90nm cpu it will post .
New CPUID added means :
Shown on post (display)
And e.g new model spesific features (like e.g SSE3 ) enabled .
Use the CPUID instruction to properly identify the processor.
• Determine the processor type, stepping, and available features by using functions 0000_0001h
and 8000_0001h of the CPUID instruction.
• Boot-up display - The processor name should be displayed according to the processor name string
defined in CPUID Guide for the AMD Athlon™ 64 and AMD Opteron™ Processors, order#
25481.
Chapter 12 , Bios and Kernel developers quide for athlon 64 . 26094.PDF

Is a 24 pin atx cable needed for the k8n neo 4 platinum?

i have a Thermaltake Silent Purepower 480 Watt PSU. i am thinking about upgrading from an msi k7n2 delta to the k8n neo 4 platinum motherboard.
if i do this, do i need this adaptor cable?

Quote from: Deathstalker on 08-June-05, 22:18:54
ryansebiz,
That Power Supply has the 24 Pin Cable as part of its cables. You do not need any adapters.
Take Care,
Richard
thanks richard, you saved me $11 on a cable adaptor

Which bios savior for the k8n neo chip???

I'm not sure which chip is in the k8n neo platinum so I hope someone knows....here's the link to the bios saviors http://www.frozencpu.com/cgi-bin/frozencpu/scan/se=Electronics/se=IOSS%20BIOS%20Savior/mp=menu_search.html

i have an ioss rd1-pmc4 bios saviour so i popt the bios chip out of my board and the chips look identical. i did not try it in though as i only got my cpu and motherboard the other day.will try soon

Better HSF for the K8N Neo Plat?

I have been looking at a few HSF's for about a month now, and I'm still not sure if I will buy it now or not but I will sooner or later, but these are the two that I have seen suggested the most, and seem to be the best (that don't sound like a vacuum):
Zalman 7000-CU= $38.50
or
Thermalright XP-90= $39.99
and keep in mind that the XP-90 doesn't come with a fan so that will be an extra $5.
So which one should I get?
Specs in sig
EDIT: Also if you don't like either one of these, could you suggest an alternative.
Thanks

I have the copper/aluminum Zalman CNPS7000A-ALCU Pure Copper/Pure Aluminum CPU Cooler which ihas lowered my temp greatly. It's only $34.99 with free 2nd day shipping from ZipZoomFly.com. They have great prices and you can't beat the shipping.
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=371002
Just note that you will have to remove the backplate from the Neo motherboard but if you use a plastic spatula and hair dryer it comes off very easily. Just keep firm but not hard pressure lift on the plate while using hair dryer. I was a little heavy handed and it made a sickening sound when it came off. Nothing bad to board as it was only the sticky stuff letting go.
Again, great HSF especially if you use Artic Silver5 with it. I connected mine to existing motherboard connection and used the included speed controller to slow down my 120mm input fan a little.
Rick
MSI K8N Neo Platinum (BIOS 1.5B6) 231 @ 10x HTF 3x
Athlon 64 3200+ w/Zalman CNPS7000A-ALCU @ 1.57V
1GB Corsair XMS TWINX PC3200C2PT Memory (Slot 1 & 3)
(3-3-3-11, 2T) @ 2.8V
2x160 RAID 0
1x160 Maxtor IDE 133 (Secondary Slave)
NEC 3500a DVD Dual Layer 16x (Primary Master)
NEC 2510a DVD 8x (Primary Slave)
ATI AIW Radeon 9600XT
HSF on Nvidia/NB (29c)
Antec TruePower 550 = +3.3V@32A, +5V@40A, +12V@24A

K8N Neo 4 Plat/SLI Hanging

Hey all, been a couple of months since I threw together my system, and everything has been working extremely well. This morning I rebooted my computer, and upon reboot the system hung and gave me no post. I checked my D-bracket and noticed that it was stuck on the "Detecting on board memory state." I've tried different RAM (that I know works), reseating everything except the processor, clearing CMOS, and running barebones. None of it has gotten me a post or progressed the system past that D-bracket step.
I'm sorry to have to make a new thread about it, but I'm really at a loss for what it might be. Has anyone else had a system crap out on them suddenly for no (apparent) reason? I leave the system on for about 3-4 days at a time, I'm not sure if that's pertinent or not. Any advice would be appreciated.
Specs:
MSI K8N Neo4 Platinum/SLI Rev 1.1
AMD 64 3500+ Venice
Patriot 1GB (2x512) PC3200 DDR @2-2-2-5
Aspire 550W PSU
Leadtek WinfastKVR 6800GT
Lite-On DVD-RW
Hitachi 80GB SATA2
WD 250GB IDE 7200
All at default clocks

What BIOS are you using. There are significant issues with USB in any BIOS below 3.6. I flashed mine to 3.7 using Winflash with no problems, and now it is running sweet. Also, that PSU you are using isn't too hot. Before you flash the BIOS, read the threads about this issue and how to properly flash using Winflash. And before that, try disconnecting all USB devices and disable "Boot from other devices" in the BIOS.

K8N Neo 4 Platnium SLI mobo issues **DEAD**

My first K8N Neo 4 Platnium SLI mobo got RMA'ed due to the fan on the nvidia chip stopping. This replaced board is now getting RMA'ed as it just fried on me. No idea what is gone on it, but I had a local shop diagnose that it was the mobo.
So is anyone else having issues with the K8N Neo 4 Platnium SLI mobo? I've asked MSI RMA dept to replace it with a Diamond Plus mobo as the K8N Neo 4 Platnium SLI mobo is oviously crap.
Do they still make the K8N Neo 4 Platnium SLI mobo or is it now discontinued?
MIke

Quote from: mrking.id on 02-May-06, 07:46:14
OK, I'm starting to understand this dual rail thingy.
Bass, did you mean THIS or THIS Powerstream?
Also, since I have your attention, what about this Enermax
I ask as it is cheaper.
Those OCZs are the same, just a different color.....
Look at the spec's for the 520W, 33A @ 12V.
As for that Enermax, it's one of those Dual-rails ones....I would not go there.
The Enermax EG651-VE is way better, but beware, it doesn't have the SLI videocard connectors, so you may need special inbetween-cables.
If you planning to build an SLI system, better go for the OCZ Powerstream 520W, the blue one, as that one has the SLI connectors.
Other then that, they are both the same

[svn:fx-trunk] 12007: When the Internet Explorer browser window is obscured Stage. width and Stage.height never return the proper sizes until/ unless the IE window is unobscured long enough for the player to feel it needs to render initially .

Revision: 12007
Revision: 12007
Author:   [email protected]
Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/non-0
    http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

Revision: 12007
Revision: 12007
Author:   [email protected]
Date:     2009-11-19 12:45:27 -0800 (Thu, 19 Nov 2009)
Log Message:
When the Internet Explorer browser window is obscured Stage.width and Stage.height never return the proper sizes until/unless the IE window is unobscured long enough for the player to feel it needs to render initially. This was preventing our preloader from completing, since we were waiting for a non-0 Stage size. Took a slightly different approach to solving the bug for which the original logic was added to work around.
QE notes: None
Doc notes: None
Bugs: SDK-24191
Reviewer: Alex, Evtim
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/non-0
    http://bugs.adobe.com/jira/browse/SDK-24191
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as

I'm wondering if anyone else has had problems with their imac fans being extremely loud when running at slow speeds? When the computer heats up enough for the fans to run at higher speeds they quiet down. New HD fan was just installed.

I have an imac that I've had for a couple years. The fans have always been loud when running at the slower speeds. When the computer heats up enough for the fans to run at a higher speed the fans quiet down. I had installed SMC fan control after multiple attempts with Apple to get the fan issue resolved. That seemed to keep the fans quiet enough. I've never had a problem with overheating. Recently the fans were becoming loud again even running at the slightly higher speeds so I took it to my local Apple store and they replaced the hard drive fan. I got it back and it's now as loud or louder than ever!! And, now SMC fan control won't "stick." The fans will speed up, but then gradually go back to the lower "loud" levels. I'm at a loss as to what to do next.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

Ati HD 2600 XT man enough for the job? Motion and Final cut

Hi all, just got my new 2008 Mac Pro with a ATI HD 2600 XT graphics card
I have a dell 24"monitoer running at 1920x1200 pixels
I am just about to buy the final cut studio package and I'm wondering if I need to spring for the 8800GT card?
so my question is: just how taxing on the gpu is Motion? is the Ati HD 2600 XT man enough for the job running at 1920x1200 pixels?

Rob Morgan at Barefeats.com has some benchmarks that compare the 2600 XT to the 1900 XT in a 2.8 8 core machine. In his test the 2600 XT was only a hair slower with Motion. I have not noticed any performance hit with the 2600 XT. I plan on sticking with the 2600 XT.

System setup advice for MSI K8N Neo 2 Platinum.

Here is the PC I'm putting together:
Enermax EG465P-VE Noisetaker PSU with 29A on combined 12v rail
5v=30A 3.3v=30A 12V1=18A and 12V2=18A (comb 12v=29A)
MSI K8N Neo 2 Plat
AMD 3000+ winchester Retail box (carefully replacing AMD shin etsu with Artic Silver 5)
WD 80GB 800JB 7200 rpm EIDE HD
OCZ 2 x 256 PC3200 Premier Dual Chan Memory (2.5-3-3-7) (List on MSI website as ok)
Matrox G400 max
adaptec 2930u scsi adapter
Pioneer 303S 6x scsi DVD rom
Umax 1200S scsi scanner
Plextor 24/10/40 EIDE CDRW
External USR robotics serial modem
Microsoft regular keyboard PS2
Logitech regular wheel mouse PS2
regular old 1.44 MB floppy drive
Installing Win XP Pro upgrade (have my 98SE CD)
In the future I will possibly ditch my scsi DVD rom and replace with NEC dual layer burner and replace Plextor CDRW with 52/32/52 CDRW/DVD ROM. For now I'm going with what I have.
No plans to overclock now if ever. Perhaps a small amount later. Maybe 2.0 ghz? Maybe no overclocking at all.
Not a gaming rig really, although I'll try the odd game at low resolution.
So is there anything I should do ahead of time? I am carefully installing the board in the case and everything that goes with it. What sort of configuration setups should I do? Do I flash to a more updated BIOS first? Do I leave onboard things un-activated first? How do I setup my memory? For instance, I may look for the best BIOS to start with and have it ready to use if I have problems. I may also use the nVidia drivers for onboard audio instead of the realtek drivers.
Not looking for all the answers, just feel free to point out any of the obvious which may save me time
thanx in advance for any help

There is a compatibility issue betwen the Matrox G series cards and the MSI Neo Platinum motherboards, which AFAIK, hasn't been solved yet. The problem seems to be a result of changes made in the newer versions of the MSI bios, however you may be stuck if you need a newer bios for the Winchester cpu. You can find out more if you do a search on Matrox in this forum.
Robert

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

MOVED: Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

This topic has been moved to Overclockers & Modding Corner.
Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

Im no pro but with your raid setup you need to stay with bios 3.0, 3.1 or 3.2. I understand that 3.3 & 3.4 causes problems but the new 3.53 beta bios fixes the problems in 3.3 & 3.4. See below:
https://forum-en.msi.com/index.php?topic=80933.120
Regarding your pcie clock, if you are using coolbits and nvidia drivers only (no MSI drivers at all), then I have used nvidia's ntune to help set the clock. For my x1 msi 6600gt, working backwards from the bus speed optimization it equalled to 106...but I am really not good at this and you should post your question under the VGA portion of this forum for a better answer to that 1 question.
However, using MSI's DOT works well too and its automated.
Btw, the pcie setting has nothing to do with your cpu/memory overclock.

It's my PSU enough for the K8N Neo 4 Plat. Sli

Similar Messages

Maybe you are looking for