It's not possible to check the photography box to see it on my PC. How can I see photos on PC?

Ah, you had Photoshop 7.0 working, and now it's not. I see that as a separate issue to updating it. I'm not sure why it would ask you to update it.
Do you know whether you have 7.0 or 7.0.1 at this point? You might be able to do a Properties function on Photoshp.exe and see that info.
You could make an attempt to reset Photoshop's preferences to defaults. Press and hold Control - Shift - Alt simultaneously immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
Only other thing that comes to mind is to use Windows System Restore to restore back to a restore point where Photoshop was working, or restore from a backup (you do make backups I hope).
If that fails, and you need to do a fresh install but no longer have the original disk and serial number I'm afraid you may be out of luck. There's no place I know of from which to download a fresh full copy of Photoshop 7.0.
-Noel

Similar Messages

Change of Adobe Creative Cloud subscription not possible online. The annually subscription is in its last month. How can I preceed?

See title

Hi Rajshree,
Thank you very much for your supply.
I did not mention anything about a Email. I wrote about my subscription of creative cloud. I know it should be possible to cancel the subscription in the last month, but unfortunately it is not possible on my account. I only get a popup message that told me to contact the support. I want to either downgrade the subscription to lightroom and photoshop only, or if it has to be, to cancel it and then reopen the new one. But as I wrote I simply do not have that possibility on my account.
Regards
Roger

I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

I have a MacBook Pro.
App - Adobe Creative suite 5.5
The only app that does´t initialize is the photoshop
Problem solve
FAQ: How do I reset my preferences?
Thank you Jeffrey Tranberry

HT5824 when I make revisions to my calendar on my iphone, it does not sync and copy the revisions onto my desktop outlook ....how can I do that ?

how can I copy calendar revisions I make on my iphone to my desktop PC's Outlook ?

Hello bsquared94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Click the download icon to download that item.
Best of luck,
Mario

When I type word to search in the Find box, Firefox will jump to the first grouping of letters it recognizes. I have to click back in the find box to continue typing my word. How can I make this stop?

I wanted to search for the word "medieval" on a web page. I started typing the word in the Find box. After I had typed "med", Firefox put the cursor on the word "medicate" in the web page. I have to click back in the Find box to continue typing my word. This is extremely annoying because sometimes I have to click back in the Find box after every letter.

Thanks for responding Chris.
I hadn't restarted after disabling SearchMenu. Having restarted, it would appear that the problem was, in fact, SearchMenu. Which was my suspicion. Once Find highlights a "word" SearchMenu interrupts to offer its services. I guess I'll post on their board, to see if there's a solution.
I should have restarted before posting. My apologies. Rookie move.
Thanks again, Chris.

How can i see my skype contacts? how can i see the contact list or a menu bar to search for contacts?

i downloaded skype and couldn't see contacts or menu bar. downloaded a NEW account, put in separate credit, and still can't see contacts or find new ones. there doesn't seem to be that feature. a contact list and/or menu bar. please help????

Arlene
Here is a link to a demonstration of Skype on You Tube. This might be of some help?
http://m.youtube.com/index?desktop_uri=%2F&gl=GB#/watch?v=Umnc02vTDOg
Have you signed into Skype with your Skype name and password? Do you have an interface similar to that shown in the video? Incidentally, the video demonstrates an iPad in landscape orientation.

TS1591 My Iphone is not being reconized by the computer I synced to before in Itunes. How can I can get my phone to recognize to ITunes so I can unlock my phone.

Hi, I am having trouble getting my Iphone to sync to ITunes. I have synced it before but now its not recognizing my device? Can you please help me with this situsation. Thank You!

Hi there EliC05,
Try the steps here: http://support.apple.com/kb/ts1538
Thanks,

HT201210 I have tried to install the 5.1 iphone update but I am getting the following message 'the iphone could not be updated because the firmware is incompatible' what does this mean and how can i reslove this

I have tried to install the 5.1,1 update but got the message that the firware is incompatible, how do i reslove this

You can upgrade to Mavericks free, just run the App Store program and search for Mavericks. But before you do upgrade I recommend the following:
1) make sure you have a recent backup. TimeMachine is fine.
2) Mavericks is somewhat more memory hungry than 10.7 was. You will need 4 GB of RAM and I strongly recommend 8 GB.
Go back to the Apple menu and select About this Mac - look under the OS info you just looked at. You'll see how much RAM your computer has now. Then click on the More Info button. There you will see your computer info listed as in: iMac, 21.5" mid 2010, for example. Return back with that information and we can tell you how far the computer can be upgraded.
If you decide to procede and you have enough RAM upgrading to Mavericks is quite simple. Click on the download button and let it do its job.

I foolishly removed the firefox toolbar ( meaning I have no file,view, edit, bookmark, or any other kind of tab including the search box or even a address bar). How can I get them back without reinstalling firefox please?

Hi, I wanted more room to view on the web, so I thought I'd get rid of some of the toolbars that were taking up space. I went to the edit tab (i think) and then selected toolbars and then just unticked the ones I wanted to lose.Worked like a charm...
Only problem was that I unticked the wrong one. Now I can't search on the web or enter a url as there is nothing there anymore. Any I do mean NOTHING expect my roboform toolbar and the "Getting Started" Firefox tab just above that.
Reason I stressed the "nothing" is because I went on yahoo answers and someone just said...go to edit and...He obviously didn't get that I don't have any kind of firefox tabs left on my browser ( except for the "getting started" tab)
I don't want to uninstall and reinstall as I'm worried I'll lose my bookmarked pages.
Would be really grateful if you could advise me of an alternative solution to getting my tabs, search bar and address bar back please?
Many thanks
Paul
ps as I don't have any tabs I can't tell you which version I have installed, but your clever software looks like it's got it right.

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

How can I see the url of a link before clicking on it?

Hi. I have Firefox 10.0.2. I used to be able to see the url of a link on web pages in the bottom left of the browser. That way, if I the url didn't seem legit I wouldn't click on the link. But now, when I put the mouse over a link, nothing comes up. How can I see the link addresses again? Thanks.

The Status Bar. where the link previously showed on mouse hover, has been replaced by the Add-on Bar. You can install the following add-on to get some of the former Status Bar functions back. The Add-on Bar must be turned on. The add-on will also stop the showing of the "tooltip" type status loading text, and will, instead, show it in the Add-on Bar:
*See --> https://support.mozilla.org/en-US/kb/what-happened-status-bar
*To turn on the Add-on Bar, see --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar '''and click on "Add-on Bar" to check it'''
*Add -on '''''Status-4-Evar''''': https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
*If necessary, after install and restart:
**Open Customze window (Firefox button > Options > Toolbar Layout '''''OR''''' View > Toolbars > Customize '''''OR''''' ALT+V+T+C '''''OR'''''right-click in the empty space at the end of the Tab Bar and choose Customize)
**'''While Customize window is open''', drag any or all of the following from the Customize window to the Add-on Bar in the order and position you want them to appear. Then click "Done" button at lower right on the Customize window.
***"Status Text" ('''''link on mouse hover or during page loading''''' or "Done" when page is loaded)
***"Progress Meter" (progress bar of page loading)
***"Download Status" (status of download)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How could it be possible to check the product number here to find that it is not factory reject?, How could it be possible to check the product number here to find that it is not factory reject?

How could it be possible to check the product number online to find that it is not factory rejection?
My product is Iphone 5 by the way.

<https://selfsolve.apple.com/agreementWarrantyDynamic.do>

Not possible to scroll the menu without lagging - Set Up a Repair service is not working

Hi,
It is not possible to scroll the menu without lagging.
The latest version has been restored but nothing.
I think the touch screen is having some problems.
I wanted to use the Set Up a Repair / Send In for service but it seems that the application form doesn't working.
As soon as push the Continue button, nothing happens.
Is there anybody from Apple who can check this issue please?
Thank You.
Anmary

Restoring a phone from a backup will put the device back to the state it was when the backup took place, i.e. all info that you had on that phone before using the backup will be gone.
You could try to restore the phone, which will back up the actual data on the phone, including the passcode, and use this backup to set up a new phone with. The passcode will still be the same, because it is part of the backup.
More info here, iPhone and iPod touch: Wrong passcode results in red disabled screen
Not being able to fill in the passcode is not much different from forgetting it.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Also have a look at this one: iTunes: About iOS backups

Is it not possible to give the select single field without an into clause

Hi,
i have to check whether my input value( only one filed) is available in the table.
for eg i need to check whether company code is available in the table t001.
then i will give .
data lv_bukrs type t001-bukrs.
lv_bukrs = 1010.
select single bukrs from t001 where bukrs = lv_bukrs.
here its asking for me to give a vaible to store the bukrs that is
select single bukrs into dummyvalue from t001 where bukrs = lv_bukrs.
Is it not possible to give the select single fieldname without an into clause

Its Possible by declaring the tables statement
<b>tables : AFKO.
select single * from AFKO where <condition>.</b>
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Notes
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
If accessing tables for which SAP buffering is planned for single records, the SAP buffer is bypassed if the addition SINGLE is not specified. This behavior depends on the current implementation of the database interface and may change in future releases. In particular, it should not be used to bypass the SAP buffer. You should use the explicit addition BYPASSING BUFFER for this instead.
The addition SINLGE is not permitted in a subquery.
Regards
- Gopi

Is it possible to check the log of IP accounts tha...

I would like to check if certain people have been hacking into my skype and reading my conversations, if not the IP address then would it be possible to check the general location of people logging into your skype?

No Alvin I'm sorry but you can't access a list of used passwords for an Apple ID (or any account for that matter) as it would be consider a security flaw

Error - Logon not possible; none of the active logon procedures is possible

Dear Gurus,
I'm trying to configure SSL with User mapping to SICF service: NWBC.
-SSL configured with STRUST transaction and I see that it is working via Internet Explorer
-SICF service NWBC was set to: "Required with Client Certificate (SSL)"
-User mapping was set like described in this article: https://help.sap.com/saphelp_nwmobile71/helpdata/en/17/1514e9b7eb4f74b0b49327b8f2a662/frameset.htm
But I get error:
Logon not possible; none of the active logon procedures is possible
Any idea ?
Please advise,
Dimitry Haritonov

Hi,
I would try to check logs first. In transaction SMICM you can set up level of logging for ICF services. So set it up to the highest possible level (this one actually dumps whole content of HTTP request, so maybe that's not necessary) and try logon again. You should get a reasonable info and you can try to figure out why it fails.
Cheers

It's not possible to check the photography box to see it on my PC. How can I see photos on PC?

Similar Messages

Maybe you are looking for