It's not possible to print from muse? Print as a PDF or export as jpg or psd? Nothing???? I cant belive it!

It's any way to get my website out of Muse? I need to send the desig to my client before develop and, as I'm using it for the first time, I've found that I can't export it in anyway!!! How it is possible? No printing neither????Does anybody know how can I do it as I could do in Fireworks?

I created different sites with Muse, and I never felt the need to print them completely. In this case, I normally would use the test sites, which you can use for free as a Muse subscriber.
But if you want and need printing command badly – why not post a feature request?

Similar Messages

  • Mac OSX Reader 10.1.2 – Cannot Change Default Printer From "Any Printer"

    With Mac Acrobat Reader 9.x it was possible to use Page Setup to set the default printer from “Any Printer” to one of our choice.  Once set it was possible to print many documents without having to go back and reset it every time.  In other words it would ‘remember’ the setting.
    Mac Acrobat Reader 10.1.2 does not remember the setting of the printer in the Page Setup dialogue and keeps reverting to "Any Printer" between printing; either from the same document or multiple documents.  Thus on each occasion I need to print I need to go to Page setup and reselect the printer.  Irritating, and time wasting.
    Now this would not matter if there were not a slight, but nevertheless significant, improvement in print quality between a document printed with the correct printer and “Any Printer” selected in Page Setup.
    NOW, before you all jump in with suggestions read this:
    1:  I do have the printer selected as the default printer in System Preferences (no difference anyway).
    2:  Selecting printer in the Print dialogue makes no difference to the print quality.  It MUST be selected in Page Setup.
    ADOBE, can you please get Mac Acrobat Reader X (10.x) to revert to the same behaviour as Reader 9.x ?
    Thank you.

    The same problem exists in Reader 11.0 for Mac.  In my case, it defaults to our specialty photo printer instead of the workhorse laserprinter.

  • Printing from the Word to the pdf printer,

    Printing from the Word to the pdf printer,
    I wanted to print a Word document using the pdf printer but sounds this printer doesn’t provide a dialogue box to choose where to save the printed pdf file. It prints the document but couldn’t know where does the acrobat stick it!
    What might be the problem?
    Is there some option that controls this behaviour?
    Thank you for the help,
    Best
    Jamal

    If you select the properties (or preferences) when right clicking on the Adobe PDF printer, there is a Settings tab (if not select the Advanced button on the general tab) and select the settings tab. There are selections there for requestion the file name and other items related to PDF creation. Sorry if my selections are not clear, I am on the wrong computer to check the correct selections for you, so give it a shot and try various selections until you find the settings.

  • Problem printing from HP printing Pro to Z5400 Designjet

    In October last year I purchased a Z5400 Designjet Postscript ePrinter. The software on both the CD and down loaded from the website called 'HP printing Pro' produces an error on the printer's screen "Wrong file format, cannot print". This happens with .JPG, .PDF and .TIF files (any graphic file).
    THe printer will not accurately respond to Photoshop CC commands either. Attempting to compose a set of 5"x7" photos across the top of a 36" wide roll of paper results in the images being printed down one side of the paper with massive wastage. THe problem seems to be that the printer will not allow a page size to be created that is shorter than the width of the paper.
    I've been in touch with HP about this and got offered a refund even though I sent evidence my Bank own to printer, not me.Replies like "This is an offer from HP to you, not the finance co" suggests HP are trying to get me to commit Larceny as a Bailee... A Criminal offense.
    I didn't buy this printer to get a refund, I bought it to earn a living with. Twice now I've tried to access the "Next day guaranteed support" part of the Customer care pack I paid $1200 extra for and not received any response.
    I'm able to print from this printer but not by using either HP's own software or from Photoshop CC. Any help here as to who I contact for the "Next day" service I bought or the highest level of management I can access to lodge complaints with about the terrible service I've been getting would be apreciated. I have a broadcast quality Video of the mess that happens when trying to use this printer but I hesitate to post it publicly until someone at HP has actually been and looked at the problem. It is either the printer or HP software causing it.
    Thanks,
    Ryadia.
    This question was solved.
    View Solution.

    Hello ryadia,
    I just sent you a private message.  If you are not sure how to check your forum messages, this post has instructions.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • I am using the hp 3525 model printer , i like to know how to take photo print from the printer

    Hi,
    I am using the hp 3525 model printer , i like to know how to take photo print from the printer .
    Regards
    Mukesh.R

    Hi Mukesh,
    I'd like to help, but can you clarify the issue?  Are you asking how to print a photo from your printer?  Also, can you confirm that your printer is a HP Deskjet Ink Advantage 3525 e-All-in-One Printer?
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • Accidently deleted the Adobe PDF printer from the Printer List

    Hi Guys,
    I have accidently deleted the 'Adobe PDF printer' from the Printer List and am now unable to print any files to PDF from any application.
    Any ideas of how to get it back?
    Cheers, Nosaj68.
    Power Mac G5   Mac OS X (10.3.9)  

    Hi Nosaj68
    Welcome to Discussions.
    1. In Applications/Utilities/Printer Setup Utility, select Add printer and reinstall it.
    2. If you can't find this file, reinstall Adobe Acrobat and that should put it back again for you.
    If this solves your question, please consider awarding stars, by checking the helpful or solved button on the post. This is not a requirement, merely an expression of thanks.
    regards roam

  • I'm trying to print from a full size 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer?

    I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

    You might be better off contacting an AutoCAD support group.

  • When attempting to print from a printer friendly version the print window is empty.

    When attempting to print from a printer friendly version the print window is empty. I have also noticed if I click on all programs and Acrobat.com the window that opens says unable to connect to the internet. I can even be on the internet and do it. I have downloaded the reader DC suggested under document to print. [personal information (email address) removed by moderator]

    Hi,
    Would you tell us the exact name of the application that you use?  What is your operating system?
    Is it "Adobe Acrobat Reader DC", "Adobe Acrobat Pro DC", or "Adobe Acrobat Standard DC" for desktop computers? 
    Or "Adobe Acrobat DC for iOS" or "Adobe Acrobat DC for Android" (for mobile devices)?

  • When printing from file, print or print preview, must set page size @ 40% to get correct printing. IE is ok only wrong on firefox!

    when printing from file, print or print preview, must set page size @ 40% to get correct printing. IE is ok only wrong on firefox! edit

    What happens when you select a scale higher than 40%?

  • I am using Aperture 3 to edit RAW and JPEG photo images on my Macbook.  I am having color printing issues with my Canon MP640 Pixma color printer.  The image I see on my macbook is not reciprocated in printing from my printer?

    My issue is that I am not getting print quality compared to the image I see on my screen.  Just recently it has been very wishie washie.  My printer is supposed to be excellent for producing color prints
    I have contacted Canon support but they told me that the signals that are sent to the printer originate from an Apple product, therefore, it is an Apple mac problem not there's.  I am wondering if my on screen proofing and/or printing profiles are correctly set.  I notice that in 'print profiles' there are nine different options for printing from my particular printer.  How confusing is that? 
    I have also found that when I choose a high standard print option my photo print comes out very red. 
    Can some kind person please help me?  I don't seem to be getting any help from anyone else!  Thanks in anticipation.

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • SmartForm Text not printing from SAP printer but prints on LOCL

    I have a smartform that looks great on the screen and if i print locally ( default printer). When i print it on an SAP printer the text is not readable. It looks like barcodes or that the text is stretched about 1 inch high. The data that doesnt print is only in the table sections. if i increase the font size to 10.0 it prints but is too large for the form. Any suggestions? I could send a PDF of the document if you wish.
    Dave Baxandall

    Hi,
    What is the printer model and what devce type is defined in the output device for the SAP printer? Perhaps the device type used doesn't support the font size. Check via SE73 -> Printer Fonts -> < Device type>.
    Regards,
    Aidan

  • Can print from HP printer assistant but not from windows

    I ran the basic driver setup for my wireless printer.  Everything looked OK.  I then tried to print a test page from the control panel printer properties page.  The document was shown as printing but nothing printed.  I also had the same results when trying to print a Word document.
    I then ran the HP Printer Assistant and successfully printed a Printer Status Report and a Wireless Network Test Results report.  Both showed everything was OK.
    The printer is on a wireless network with a dynamic IP of 192.168.0.4
    The printer works fine on 2 Windows 7 computers.

    Hello @JimTW and welcome to the HP Forums!
    I would like to help get you printing on that Windows 8.1 computer
    I'd recommend first that you run the HP Print and Scan Doctor. Does it find any problems? If so, please follow whatever suggestions it makes for you. Are you able to print the test page from the tool?
    If that doesn't work, are you able to put the printer's IP address into an Internet Browser (Internet Explorer, Firefox or Chrome) and get the printer's information page?
    If you're still unable to print from Word or the Control Panel Printer Properties, please let me know which model HP printer you have and I'll have a further look into things.
    Hope to hear from you soon,
    Happy Holidays!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Officejet 4620 prints from HP Printer Assistant but shows as offline for normal print jobs

    I just purchased an Officejet 4620 to use wirelessly on our home network -- we have two Thinkpads running  Windows 7 64-bit.  I followed the installation instructions and successfully printed out test pages using both the Printer Properties page in Windows and the HP Printer Assistant (which, by the way, shows that the printer is online and ready).  However, when I try to print from any other program (Word, Chrome, etc.), after a moment or two I get an error message saying the printer is offline and asking if I want to cancel the print job.  Yet when I check the online status, it again shows that it is online and I can, again, successfully print a test page.  
    What could possibly be causing this?  It makes no sense to me.
    Thanks in advance for your assistance.

    Hi oyfpro,
    The Xfinity router may need some tweaking.
    Login to your router using the provided instructions by Xfinity and navigate to the wireless settings.
    Change the channel to 11 or something less crowded.
    Change the network encryption to WPA2 as it is the most secure and most reliable.
    Last but not least, update the firmware on the Xfinity router to make sure it's fully up to date with everything.
    Thanks.

  • CANNOT PRINT FROM ADOBE 8.1.2 PDF FILE TO OLIVETTI ANYWAY

    Hi I have had this problem before wiht a laserjet printer and cannot remember how I have solved it.
    I am on a Macbook pro running leopard OS 10.5.2 and trying to print a standard pdf from Adobe Acrobat Professional Reader 8.1.2 to an olivetti anyway. I have no other probs printing,and can print this same pdf through preview, but the fonts default.
    It goes through as if it is printing then in the printer set up it just stops itself and won't print.
    Any ideas?
    Cheers

    I did download new drivers, but the situation gets even more interesting. It is only one file I can't print. I print .pdf files from a particular website quite often. When I started having problems with this one file - I just got stuck there. Well, I went to some of the other "new" pdf files and was able to print those. I still cannot print one particular page. I have tried downloading the file to my hard drive but still could not print. I have decided there is some code in this particular file that my printer cannot compute. I did manage to get it printed in B/W on an HP laser printer. Just is a weird glitch. Thanks for responding.

  • Can't print from Firefox - "Printer Error- An unknown error occured while printing"

    I am unable to print anything from Firefox! I am using Firefox 19.0.2.
    I performed a "Reset To Default State" for Firefox yesterday to fix some performance issues. Those issues are resolved, but now I can't print!
    I am able to print to 'Microsoft XPS Document Writer' and save as an .xps file. But I am unable to actually print to my HP LaserJet printer.
    Here are the steps I have taken trying to resolve the printing issue-
    I opened the prefs.js file in WordPad and removed all entries beginning with 'print'.
    (When it did not resolve the issue, I restored the prefs.js file with a backup)
    I downloaded and installed the latest driver for my printer from HP.
    Still unable to print from Firefox after taking those steps. Note that I am able to print from any program other than Firefox.
    What steps can I take to fix this issue?

    @sklein65
    I thank you for your reply. My problem occurred when trying to print to the XPS printer, I found, that, if I disabled the UAC, the problem went away. You may want to give this a try. You can access you UAC by entering 'UAC' in the Window's Search Box. I had an additional problem with my 'Pinned' websites becoming unusable, I traced this down to Firefox version 24 (beta channel). I reverted back to v23.0 and I never had the problem, again. Note, that, all versions of v23.0 worked, the problem occurred when v24 was installed. I disabled all auto updating in Firefox.

Maybe you are looking for

  • How do I use iCloud to get the info from my old iPhone 5 to my new one?

    I just got a new iPhone 5.  The girl in the store wiped my old phone (also a 5) and assured me that everything was backed up to iCloud and that I'd be able to get all my apps, photos, contacts etc onto the new phone - all i had to do was update the s

  • [Incoming Payments for WTax] Primary Key not exist in DB

    While performing the TDS upgrade, I am getting an error message as "[Incoming Payments for WTax] Primary Key not exist in DB". I have checked that the sheet conforms to the instructions provided in the Upgrade guide but am not able to resolve this. A

  • IPlanet WebServer 4.1 + App Server 6.0 sp3

    Hi, I've got a problem with iWS 4.1 and iAS 6.0 sp3 on solaris. Both installation was successful so I deploy the helloworld ear for testing. It was completed without errors. Then I visit the site http://<host>:<port>/ias-samples/helloworld/docs/index

  • Zend Remote-Finally !!!

    Hi All, Hundreds of dollars and hundreds of hours and finally I can see a basic mysql database table on a remote host.  I'm not quite ready to say Woohoo !!! yet as this took paying for a hosted virtual machine and going through several variations on

  • Nef open in photoshop cc help

    photoshop cc cannot open nikon d800 nef files...help please