It's possbile to upgraded from win2003 x64 sp2 which installed SCOM 2007 R2 into windows 2008 R2 directly?

current OS: windows 2003 R2 x64 SP2
current SCOM version: SCOM 2007 R2
current database version: SQL Server 2005
it's possbile to upgraded from win2003  which installed SCOM 2007 R2  into windows 2008 R2 directly without reconfiguartion SCOM?

Hi,
And as far as I know, in-place operating system upgrade could work, but there is no document about this. Please take backup before doing upgrade.
If you want to in place upgrade the OS, we can simply move SCOM databases to  new servers and rebuild management servers one at a time. the downtime for SCOM would be very minimum if the management group has the capacity for agents to report to failover
management servers while the primary MS is getting rebuilt. You do not have to perform in place upgrade on the OS to keep SCOM.
Based on your need, I would like to suggest you add a Windows 2008 R2 as additional management server for your management group. And if possible, please also upgrade your SQL 2005 to SQL 2008.
Here is a thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4713e303-76a7-4954-9494-55565757d65e/scom-server-os-and-sql-upgrade-from-2003-to-2008-r2
Regards, Yan Li
Dear Yan, Since rebuild/config SCOM Server is very complicated so it's better that I can just upgraded OS into windows 2008 R2 without do anything else.

Similar Messages

  • I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

    I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

    Contavct Adobe support thru chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

    You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
    iMovie 11 - cameras supported:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    iMovie 9 - cameras supported:
    http://support.apple.com/kb/HT3290?viewlocale=en_US
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014
    Digital camera RAW formats supported by OS X Lion:
    http://support.apple.com/kb/HT4757?viewlocale=en_US
    Digital camera RAW formats supported by OS X Snow Leopard:
    http://support.apple.com/kb/HT3825?viewlocale=en_US

  • Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

  • Plerase can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I

    Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and  are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi

    BrightBluephotograph wrote:
    I cannot install lightroom 5 until the upgrades from 4 are on the pc,
    You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5.  Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box.

  • X11 Upgrade from 1.0 and Re-install (Mac OS 10.4.8)

    Hi, I have a iMac G5 (PowerPC) running Mac OS 10.4.8 (I upgraded to Tiger from 10.3). Before I upgraded my OS I had installed X11 V1.0 in order to run OpenOffice. When I upgraded, the upgrade was supposed to replace X11 V1.0 with X11 V1.1.3 but it never did. I tried 3 things:
    1) I tried downloading the X11 V1.1.3 upgrade from the Apple website. But when I ran the update, the update stopped saying "my system didn't need the update".
    2) I then went to my applications folder and deleted X11 V1.0. When I tried running the X11 V1.1.3 upgrade I got the same error message.
    3) I restored X11 V1.0. I then inserted the Tiger OS disc and looked for Option Installs. When I tried to checkmark on "X11" the disc wouldn't let me, saying the file was "0 Bytes".
    I want to upgrade to the latest version of X11. Can anyone help?

    I had the same problem getting Inkscape to run.
    The trouble is that the updater on the web site only works on X11 v1.1. Since X11 is an optional install, 1.1 wasn't automatically installed when you upgraded to Tiger. Here's what to do.
    Insert the Tiger upgrade DVD. Open Mac OS X Install DVD: System: Installation: Packages and double click on "X11User.pkg". Do the installation. It'll update X11 from 1.0 to 1.1.
    Now go back to the "X11 Update 2006" disk image and run the installer. It should go this time, bringing your copy of X11 up to 1.1.3.
    Single 1.8 G5   Mac OS X (10.4.3)  

  • Upgrading from sp1 to sp2

    Team Portal -
    I just upgraded my application from Sp1 to Sp2 (basically right click on application
    and select Install -> Update Portal Libraries).
    Do I need to do anything to the domain, or just rebuild and redeploy the ear file?
    Thanks
    Regards,
    Neeraj

    I didn't do anything to the domain, but I did "install portal" and "install
    weblibs" too.
    I first did only the update too I think, work perfectly till I made a simple
    jsr-168 portlet with the wlw wizard that didn't work.
    Thank you for any and all help,
    Geoffrey
    "Neeraj Harlalka" <[email protected]> schreef in bericht
    news:3fe72282$[email protected]..
    >
    Team Portal -
    I just upgraded my application from Sp1 to Sp2 (basically right click onapplication
    and select Install -> Update Portal Libraries).
    Do I need to do anything to the domain, or just rebuild and redeploy theear file?
    >
    Thanks
    Regards,
    Neeraj

  • Restore Exchange 2007 SP3 to Windows 2008 R2 from Windows 2003

    Perhaps I'm being dense, but I had Exchange 2007 SP3 installed on a Windows 2003 Server, and I've used "setup /mode:recoverserver" to restore it to a Windows 2008 R2 server... how do I restore the databases which I backed up with the Windows backup tool
    on 2003?
    I installed KB974674, the restore tool onto the 2008 R2 server but when I try and restore the backup it comes up with "this feature is no longer supported".  Something I'm missing here?

    These things marked as answers are not answers.
    I have now thoroughly tested using setup /mode:recoverserver and it works fine going from Windows 2003 to Windows 2008 R2 with Exchange 2007 SP3, done several installations now without a problem.
    "Setup /m:RecoverServer cannot be used across operating systems. A server that was originally running Windows Server 2003 can be recovered only on Windows Server 2003, and a server that was originally running Windows Server 2008 can
    be recovered only on Windows Server 2008."
    This appears to be wrong, unless someone can tell me why it's right (I haven't tried moving Unified Messaging yet).  I've done it to 2008 R2 several times now and also in the other direction, from 2008 R2 to 2003, I can't find anything that didn't work
    afterward, although I haven't really thoroughly tested OWA yet, I admit (but it does appear to be working).
    I think that documentation is out-of-date as it doesn't mention R2 plus I think it was written before SP3 came out and that paragraph is just wrong.
    Basically how I do it is like this:
    Dismount databases from the 2003 server and copy the storage group folders to a network location or removable media.
    Install the Windows 2008 R2 server using the same machine account that was being used by the 2003 server.  Install the prerequisites needed for Exchange 2007 SP3 installation on 2008 R2 (note in addition to the IIS components and RPC over HTTP this
    also requires the AD tools in RSAT, which I haven't found mentioned in technical documentation).  Install the relevant windows updates.
    Install Exchange 2007 SP3 using setup /mode:recoverserver  Install the update rollup.
    Copy the storage groups into the relevant folders on the new server and mount them.  Migrate any relevant certificates (e.g. for ActiveSync).
    Obviously then check it all over with the diagnostic tools and check it with EXBPA.  The backups are obviously totally different, but really I think you should be using DPM anyway.
    To me that was pretty easy to do, to be honest.  About 1.5 on a scale of one to ten.  Basically install it, recover it, copy over some files and mount them.
    Seriously on a halfway decent server I've done it in under an hour.

  • Upgraded from flash x64 to new multib flash. errors!

    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    multilib is up to date
    community is up to date
    warning: flashplugin-10.1.82.76-3 is up to date -- reinstalling
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: lib32-libstdc++5: requires lib32-gcc
    I've also tried
    sudo nspluginwrapper -v -a -i
    and I get
    Auto-install plugins from /usr/lib/mozilla/plugins
    Looking for plugins in /usr/lib/mozilla/plugins
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libnpgoogletalk64.so: wrong ELF class: ELFCLASS64
    Install plugin /usr/lib/mozilla/plugins/nppdf.so
      into /usr/lib/mozilla/plugins/npwrapper.nppdf.so
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libvlcplugin.so: wrong ELF class: ELFCLASS64
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libnpgtpo3dautoplugin.so: wrong ELF class: ELFCLASS64
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/librhythmbox-itms-detection-plugin.so: wrong ELF class: ELFCLASS64
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libnpsoplugin.so: wrong ELF class: ELFCLASS64
    *** NSPlugin Viewer  *** ERROR: /usr/lib/mozilla/plugins/libnpjp2.so: wrong ELF class: ELFCLASS64
    Auto-install plugins from /usr/lib/firefox/plugins
    Looking for plugins in /usr/lib/firefox/plugins
    *** NSPlugin Viewer  *** ERROR: /usr/lib/firefox/plugins/libnpgoogletalk64.so: wrong ELF class: ELFCLASS64
    *** NSPlugin Viewer  *** ERROR: /usr/lib/firefox/plugins/libnpgtpo3dautoplugin.so: wrong ELF class: ELFCLASS64
    Auto-install plugins from /root/.mozilla/plugins
    Looking for plugins in /root/.mozilla/plugins
    any ideas?

    I get this as well now since activating the new multilib.
    ~  $ sudo pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    multilib is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: lib32-libstdc++5: requires lib32-gcc
    ~  $
    I would really like to be able to upgrade my system at some point in time and i kinda like the multilib thingy so does anyone have a clue as to what to do?

  • Oracle upgrade from 32-bit Oracle 9i to 64-bit Oracle 10g (Windows 2003 R2)

    Hello Gurus,
    Existing I have SAP R/3 4.7 200 Oracle 9i Windows 2003 32bit
    I want to upgrade Hardware to x86 EMT64bit 
    I would like to upgrade to 64-bit Oracle 10G from 32-bit Oracle 9i. runs on Windows 2003 32bit. Target DB is Oracle 10G on x64 Windows (EMT64 hardware) on Windwos 2003R2 64bit. & Add Solution manager to new System
    Please give me any advise which is the better way of upgrading Oracle 10g. Or better yet, please advise a safe way of upgrading to Oracle 10g from 9i
    Please guide me about request shipping DVD For This Solution to my site
    Many thank in advance
    Kuekul

    Hi
    You can download Oracle 10g from service market place www.service.sap.com>downlaods>Installations and Upgrades-->
    Installations and Upgrades - Entry by Application Group>SAP NetWeaver>SAP NetWeaver7.0>Installation and upgrade>windows server-->oracle check for below software and download it
      EXE 51031678_1 ORACLE RDBMS 10.2 Windows 1 of 5 
      RAR 51031678_2 ORACLE RDBMS 10.2 Windows 2 of 5 
      RAR 51031678_3 ORACLE RDBMS 10.2 Windows 3 of 5 
      RAR 51031678_4 ORACLE RDBMS 10.2 Windows 4 of 5  
      RAR 51031678_5 ORACLE RDBMS 10.2 Windows 5 of 5
      ZIP 51033272 ORACLE 10.2 Client  
    ZIP 51036971_2 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA32 32bit 
    ZIP 51036971_3 ORACLE RDBMS Patch 10.2.0.4 Windows Server on IA64 64bit 
    ZIP 51036971_4 ORACLE RDBMS Patch 10.2.0.4 Windows Server on x64 64bit 
    Regards
    Uday

  • Upgrade from 4x2 GB to 2x8 GB Ram results in strange Windows 7 64bit behavior

    I wanted to upgrade my System, swapped the 4x2 GB (Adata 1600G) to 2x8 GB (G.Skill F3-2133C9D 16GXH) Ram to the Dual Channel Slots (2 x Blue)
    The System asks me to enter Setup with F1 recognizing the mem change.
    I have OC Genie active and tried it later without.
    When I boot to Windows with the new RAM my NVIDIA Card has a yellow exclamation mark in my device list. Also NVIDIA Software can`t access the card telling me I would have not such an device active. I tried to reinstall the drivers without success.
    I tried a couple of changes in bios and rebootet, but gave up after 40 Minutes of experimenting.
    After I went back to my old RAM the system runs smooth like always.
    Now I hope someone here can give me the right advice what to do, or ì`ll sent them back to the shop.
    System:
    MSI Z68A-GD80 (B3) (MS-7672) (Bios V20.1 01/09/2013)
    Intel Core I5-2500k @ 4200
    NVIDIA N560GTX-Ti
    New Ram: G.Skill RipjawsX F3-2133C9D 16GXH
    Old Ram: A-data 1600G @ 667 MHZ
    What I did:
    1 G.Skill Ram in DIMM1 works good, also with OC
    changed the other one G.Skill module workd ok (to be sure both are ok)
    as soon as I add the second RAM NVIDIA Card doesnt work correctly, some programs give me strange warnings, blue screens, random crashes.
    I choosed DIMM1 + 3 (Blue) or DIMM2 +4 and all other positions with no good result.
    Even with default settings no luck.
     i get the following error on my nvidia card in the device manager
    "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
    Is it an error on the motherboard ?
    How can I proof that? Any tools ? I`m really out of ideas ...
    Thank you

    Quote from: cekay on 29-March-13, 00:58:11
    thank you. that`s what I had in my back mind
    I didn`t thought that the performance increase is that less. any reviews you can recommend ?
    Here is the memory scaling on a Core i7 2600K:
    As you can see, in both cases (non-3D and 3D apps) the performances boost is close to zero.
    So again: for all the current Core i5 / Core i7 processors, DDR3-1600 is the best match.
    Above that, nothing but troubles.

  • Upgrade from CRM 4.0 sp6 to CRM 2007

    We are in the process of upgrading our sandpit from CRM 4.0 sp 6 to CRM 2007 as part of an overall CRM upgrade project.  The technical upgrade phase went fine we now have the sandpit running some of the standard delieved business roles etc.  My question is with respect to my original customizing:
    - what customizing/configuration needs to be redone
    - what needs to be adjusted.
    - what is no longer relevant
      Is there any documentation out there that deals with addressing this topic.  Can anyone share their experiences. 
    We have a number of different Web based interaction centers some dealing with order taking in place in our original installation. 
    Thanks in advance
    Eddie

    Eddie,
    The rule of thumb is the following:
    - All UI based modifications/configurations/enhancements done in the lower release, must be redone in the new release.  Classic example is you removed fields from a screen or added new fields.  You also lose all your UI work done in CRM 40.
    - All non-UI based config/development that is in the business layer of the system should be fine, and may need some minor adjustments, but you should be able to keep this.  You probably though will have to redo some of your IC config as there were functional changes between releases.  I don't think however you will find that the configuration adjustments to take a lot of time
    - The old PCUI/IC webclient and SAP GUI applications(for data entry) are no longer relevant.
    Take care,
    Stephen

  • Tips to upgrade from OS 10.5.8 to 10.9 on macbook aluminium 2008.

    Hi,
    I'm looking for tips on how I could or should upgrade the OS of my macbook aluminium since I bought an Iphone 5 that can't be handle by itune 10.6.1 and a new time capsule that can't backup my macbook as it is.
    Here are the specs of my computer.
    Macbook aluminium early 2008
    Os X 10.5.8
    processor : 2GHz Intel Core 2 Duo
    Memory : 2GB 1067 MHz DDR3
    L2 cache : 3MB
    Hard drive : 150G
    Wireless Card Type:          AirPort Extreme  (0x14E4, 0x8D)
    LCD Resolution:          1280 x 800
    Is there any danger to loose data from my Itune library or garage band? What's your advices?
    Thanks for helping me getting a little more up to date. ;-)
    Marc

    Your computer can't run 10.9. Back up your data, click here, install the DVD, run Software Update
    , go to the online Apple Store, and order a download code for Lion 10.7. 
    Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004.
    (105668)

  • Upgrading from SP1 to SP2 not possible?

    Hi,
    when installing CRRuntime_12_1_mlb.exe (Crystal Reports 2008) and after that CRRuntime_12_2_mlb.exe, there is an error message like "A different version of this product is already installed...cannot continue...." (translated from German). Why is that? Isn't it possible to upgrade?
    Regards,
    Florian
    Edited by: floele on Aug 13, 2009 1:55 PM

    It should be possible. Unfortunately, my testing indicates the following:
    If you try to install CRRuntime_12_2_mlb.exe over CRRuntime_12_1_mlb.exe, you get the error.
    Trying to update the runtime using the CRRuntime_12_1_mlb.msi results in the same error.
    Same error is produced trying to update runtime installed by CRRuntime_12_1_mlb.msi and trying to update that with CRRuntime_12_2_mlb.msi.
    Possible workarounds:
    1) Preliminary test indicates that if you create your own setup project (setup.exe) or msi, the issue goes away.
    2) Uninstall the runtime from the CRRuntime_12_1_mlb.* and do a new install using CRRuntime_12_2_mlb.*
    This issue will be tracked with R&D for a resolution. I will update this thread once I have the tracking number.
    Ludek

  • Just upgraded from Tiger to Snow Leopard on a 2007 Macbook. MASSIVE speed boost. Why?

    I'm just wondering, is there any way to tell exactly why a mac was slow before a system upgrade but fine again afterwards?
    My old Tiger OS had got to the stage where Safari would bounce about 10 times before opening, remain unresponsive for minutes after that, when clicking the spotlight icon in the corner would produce a spinning beachball for ages, when the entire machine had turned into an incredibly slow piece of junk.
    I upgraded to Snow Leopard last night and it's as fast pretty much as it was when I first bought it. Have 2GB of RAM, 30GB free disk space, etc.
    What caused the massive speed boost? Should I now assume that there was some sort of mismatch in my old OS installation or something, some out of date extensions or files which were causing it to slow down?
    I know a new OS brings a speed boost, but this is so dramatic I can only assume some sort of gigantic error was fixed when I upgraded. Any way to know exactly what?

    OSX directory structures get a little wierd over time (thus the "Repair Disk" item under DU which many people need for very minor fixes).
    Also some of your system files may have been living on hard disk sectors that were questionable, and the upgrade process forced enough of a re-evaluation of disk sectors to find good ones.
    Either way, I would just say "Thank you, Santa", and move on.
    <Following OSXFreak> ... Or maybe I know nothing about Tiger ... which is very likely.

Maybe you are looking for