It's possible creating new markings/points ("joints") on the body?

Someone know if is possible and how to create a new point on the body?
I need for instance, put a new point between two body joints and be able to calculate the distance from one kinect body joint and the my new created custom point.
Regards,
Adriano.

I think you can have a look at the BodyBasics sample for this. In that sample, points in the "body space" are created from Kinect data. If you want to add other points you can draw them in a similar way but you will have to provide the position
for these points as Carmine said. For example, you can add a point in the middle point between the elbow and the shoulder but you will have to calculate its position in the code each time you want to draw it, Kinect is not going to track this point in the
user.

Similar Messages

  • Creating new mount points on pre installed Solaris 2.7

    Creating new mount points on pre installed Solaris 2.7

    Hi,
    Thanks for suggestion.
    I have checked note 1521371, so as per note I have to provide the locations as given below..
    For PI1 (i.e. PI Development)...............
    Oracle Base Location : /oracle/PI1
    Oracle Home Location : /oracle/PI1/112_64
    Inventory Directory : /oracle/PI1
    For PI2 (i.e. PI Production)...............
    Oracle Base Location : /oracle/PI2
    Oracle Home Location : /oracle/PI2/112_64
    Inventory Directory : /oracle/PI2
    Correct me if I am wrong..
    Could you please tell me, does we need to set the ORACLE environmental variables i.e. ORACLE_BASE, ORACLE_HOME and ORACLE_STAGE before start the ORACLE database installation?
    Kindly suggest,
    Thanks and regards,
    Amit....

  • Can not edit or create new power points since installing Yosemite.

    I can not edit or create new power points since installing Yosemite.  I can open and run the power points I have previously created but every time I try and edit or create a new power point it simple comes up with this
    Also when I open the font drop down menu all the font names are in Chinese

    Have you run all the office updates? We have to assume this is a proper copy of Office 11 of course and not one 'from Hxxx-Kxxx'. I  would also consider re-installing Yosemite-something is screwy on your installation of something if its picking up China..unless of course it is true that the Chinese have been hacking into iTunes and are secretly trying to make you into an agent of the state..you will speak Mandarin..you will speak Mandarin  

  • How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

    How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

    What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

  • With PS 7  create new  Place two objects on the new file  then you may cut copy and paste Cs2  create new  place two object on the new file Cut is not available how does one cut and paste in new file

    With PS 7
    create new
    Place two objects on the new file
    then you may cut copy and paste
    Cs2
    create new
    place two object on the new file
    Cut is not available how does one cut and paste in new file

    If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
    In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
    Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
    If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

  • How do i ensure the new access point is joined the controller or not

    How do i ensure the new access point is joined the controller or not

    To Verifying that Access Points Join the Controller or not there are two ways as below.
    Please go through the step by step to find the APs joined state
    When replacing a controller, you need to make sure that access points join the new controller.
    Using the GUI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 Follow these steps to configure the new controller as a master controller.
    a. Click Controller > Advanced > Master Controller Mode to open the Master Controller Configuration page.
    b. Check the Master Controller Mode check box.
    c. Click Apply to commit your changes.
    d. Click Save Configuration to save your changes.
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.
    Step 4 Once all the access points have joined the new controller, configure the controller not to be a master controller by unchecking the Master Controller Mode check box on the Master Controller Configuration page.
    Using the CLI to Verify that Access Points Join the Controller
    Follow these steps to ensure that access points join the new controller.
    Step 1 To configure the new controller as a master controller, enter this command:
    config network master-base enable
    Step 2 (Optional) Flush the ARP and MAC address tables within the network infrastructure. Ask your network administrator for more information about this step.
    Step 3 Restart the access points.

  • HT1766 I hooked up my phone because I needed to restore my contacts, instead my phone set up a new restore point losing all the info I wanted.

    I hooked up my phone to my computer so that I could have my contacts restored, instead it made a new save point effectively losing the info I needed.  Is there any point to backing up your phone?

    Ocean20 wrote:
    I thought itunes only keeps the latest backup and every time you do a new backup it overwrites the old backup
    iTunes will keep all backups until you delete them.
    When you Restore from backup, iTunes renames the current backup and adds the date to the name and new backup is named Your_iPhone_name iPhone.
    iCloud will keep backups until you delete them. You are not necessarily limited to 3 but Apple can limit you to 3 iCloud backups.

  • Create new backup point

    How do you create a new individual/independent backup in iTunes for the iPhone, so that that specific backup never gets updated again? When I click on the "Restore from backup" by right clicking on my iPhone in iTunes I have about 5 backups in there from different dates. For example, I have a backup dated Jan 14 2009 that never gets updated anymore, but I know I can revert back to that date if I need to. For the past few months, no new backups have been created, and instead I have regular iPhone backup that gets updated every day. I'm worried that if I have to restore my iPhone, and then I accidentally sync my empty iPhone, I'll have lost all my data because it will just replace the default backup. Is there a way to manually create a new backup that will then never get updated again, for archival purposes? I've tried the "Back Up" option, but that doesn't seem to create a new backup point.
    Thanks in advance!

    For some reason iTunes seems to overwrite the existing backup with a new one, unless (as has been noted) there is a firmware upgrade. It is possible to keep some old ones and force a new backup file....
    Go to the backup location (mac is similar):
    C:\Documents and Settings\<name>\Application Data\Apple Computer\MobileSync\Backup
    And notice the folder names - Noticing the naming convention.... The folder without a numeric ending is current. It is possible to give it a time/date ending and then it will not get overwritten. So if you have a bunch of folders, take the one without a numeric ending, copy it and just add "-20090321-091358" to the end of the copy. To the system it is no longer the current backup, but it was made on date-time.
    I have done this successfully quite a few times - I usually do it before a firmware upgrade, just to make sure.
    Before you backup again, look at the backup list in iTunes and you should see an "old" backup with whatever date and time you gave it. Your next backup should be the same alpha-numeric string and no date-time.
    Message was edited by: tokatta

  • How do I create new mount point

    Hello,
    I'd like to create a new mount point. The Admin guide says to click the Create button on the toolbar but I don't see anything that says Create (I have New, Edit, Upload,...).
    Searching here I've seen references to some code snippets that purport to do it but I'd rather use a GUI.
    Thanks for any help

    You have to use iFS Manager, not the WebUI.

  • Create New Entry Points

    Hi All,
    I have a requirement to display a folder as an Entry Points in KM.
    Same as displayed in the blog [https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1027]
    I have done the configuartion as mentioned the blog still I am not able to view the folder.
    Request your support to achive the same.
    regards,
    SJ

    Hi
    Thanks for the link; still I am not able to view the new entry point for my folder.
    My requirement is to have other folder displayed in SAP standard favorites.
    Presently, below mentioned folders are displayed:
    --> My Room Folders
    --> Favorites
    --> Personal Documents
    --> Recently Used
    --> Common folders
    --> Public Documents
    --> More...
    I need to add a new folder
    --> XYZ
    I have followed the instruction mentioned in the wiki, but I am still not able to view a folder appearing in KM favorites.
    Regards,
    SJ

  • Creating documents-please point me in the right direction

    Could someone please point me in the right direction:
    I have a couple of tabbed panes which contain some data-
    i save the data to mySql db.
    i read the databack. and get a rs.
    i want to take this data and put it into a document(namely pdf).
    -so that it is not editable.
    -so that i can preview the document before printing it
    I would like to print the data on a template - if possible? can i use a word template?

    Could someone please point me in the right
    direction:
    I have a couple of tabbed panes which contain some
    data-
    i save the data to mySql db.
    JDBC will handle this easily.
    i read the databack. and get a rs.
    Good.
    i want to take this data and put it into a
    document(namely pdf).Consider using XSL-FO (if you are comfortable with XSL) or i-Text (if you want to create the PDF programatically)
    -so that it is not editable.This is the default behavior of PDF.
    -so that i can preview the document before printing
    it
    This is provided by most Acrobat readers within a browser.
    I would like to print the data on a template - if
    possible? can i use a word template?Huh? Now you lost me. PDF is a document format. Word is a document format. You can include a PDF in a Word document. However, why would you do that? You already have a PDF.
    - Saish

  • Instead of creating new resource, recon is updating the same resource object for a user

    Hi,
    I created a DB target recon in OIM 11g. I ran recon and it created resource object. Resource is visible in Accounts tab.Now, I added one more entry with different description in DB. I ran the recon again. This time, instead of creating new resource object, recon linked it the same user with same resource object.
    My requirement is to create as many resource object as there are entries in DB table. The recon should not link all DB entries with same resource object in IDM. For every entry in DB, recon should create that many resource objects in accounts tab of user.
    Please let me know how to achieve the same.
    Regards,
    Kalpana.

    Hint is : Verify Reconciliation Key field mapping in Process definition
    Thanks,
    Pallavi

  • How do you create new groups within Contacts on the iPad?

    Can you create new groups within Contacts directly from the iPad, iPhone,or do you have to do it on the computer first?

    The easiest way is to get the app called group e mail.  There are a couple of others as well.  There is a way to do it on your computer, and sync it, but I find that personally frustrating.  :).  Save yourself the aggrevation, and get the app, that works pretty well.

  • Can I get a newsletter created in pages to open in the body of an email

    I would like to send newletters created in Pages to clients and have them open in the body of the email rather than as an attachment...is this possible?

    Export to pdf, but this really only works for Mac users. Windows users see these as attachments.
    eMail newsletters are usually created in html. Pages '09 does not create html.
    Peter

  • The bookmarks disappeared in safari on iPad and I am unable to create new ones or bring back the bookmark bar

    During the day yesterday, the bookmarks I had in Safari disappeared, as well as the bookmark bar.  In preferences I still have the "show bookmark bar always" option marked.  When I hit the bookmark symbol, to create the bookmarks the display has changed and it looks like it is creating a new bookmark, but when I go into bookmarks it is no longer there.

    Tap Settings > iCloud
    Switch Safari off then back on.
    Give iCloud a minute or two to sync your bookmarks.

Maybe you are looking for

  • PSE 7 with windows 7 cannot get edited pics just  not back in Org ?

    Since installinng windows 7 I have not been able to edit pictures and have them back in Organizer just have a blank icon this happend after installing windows photo gallery. went to default tried to put defalt as Adobe photoshop elements organizer bu

  • How to solve Fusion ADF file upload and download?

    Now we are building web application with Fusion ADF (JDeveloper 11.1.2.0.0). We want to downloading and uploading from tables.Is there any special tool in Fusion ADF or should I going with traditional java coding. Thanks

  • Center speaker playing through su

    can anyone please help, for some unknown reason my center speaker is playing through my sub woofer,? i have a soundblaster li've 24bit external, with a logitech 5. surround system. every thing else works, except center speaker playing through sub, i

  • Windows XP SP2 and Solaris 10 x86- Dual Boot, Single Hard Drive

    I recently decided to look into installing the newly available Solaris version capable of running on my personal x86 Intel workstation (Solaris 10). There were quite a few hurdles, however, in getting the system to install, detect devices and associa

  • I need all drivers for r007txlaptop running Windows 7 64-bit OS.

    For some reasons i have to use windows 7 64 bit os on my r007tx ,and i am not able to turn on wifi or bluetooth on it or anything for that matter. I have searched for the drivers over the internet, i found some files but it says the file is not compa