It's possible to make simultaneous changes in the following architecture?

For safety issues we can't deploy apps through nwds, so the only way to impact on the environment is release and import activity in the environment.
We set the nwdi with environments dev, qa and prd.
What I see is:
- I make a change to a dc A and released it to test in qa.
- Then i make a change to a dc B, released it to test in qa, the user test, gime the ok and i transport it to prd.
- When i make the assembly proccess it put all the changes, which i did in the dc to and which I did in the dc b (I guess it's because both tasks released).
- So this is a configuration problem of di, or a limitation that does not allow assets to pass separately changes
Regards.

Limitation of NWDI in combination with the Software Component model...
So in other words you couldn't do anything about it
But... since EHP1...
This limitation can be overcome by using "Activity based transporting":
see: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b016d936-6d90-2b10-159e-ecbe904cbd8a (starting chapter 3.3 on page 28)
Cheers,
Benjamin

Similar Messages

Is it possible to make a change in the library that is called in a subvi? (in this case the GetCoefficients in the Levemberg-Marguardt curve fit)

Hi,
I need to make a change in the way the new coefficients are calculated. It's the "get new coefficients.vi" in the nonlinear levenberg marquardt algorithm.
A library is called, but the change must be made in that library. Is there any way to do this? I do understand C++ or similar language where the library might be programmed in, that's not the problem.
with kind regards
Hasse wiersma

No, we do not have access to the source code for that shared library, it ships as part of LabVIEW and only NI has the source code. You will need to re-write (either in LabVIEW or C++/DLL) all the code completely.
-Jim

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

Is it possible to make a slipstream using the recovery CD (SM30-154 WXP)?

Is it possible to make an slipstream using the product recovery (satelite pro SM30-154 and windows XP home) and die windows XP sp 3 update?
If so, how?
grtz
Bert

Hi
What you could do is to create a new image using a 3rd party application like Norton Ghost for example.
You could firstly install the Windows XP using the Toshiba recovery CD.
Then you could install the MS service pack 3 and then you could create the new image.
Such image could be stored on the new CD or as file on the second partition.
I did it too. Ive got two partitions on my HDD and have created a backup of C (system partition) using the Ghost. The file is stored on D (data partition) and if something will go wrong with my Windows I can restore it using this file.
Easy ;)

Portege R600 - Is it possible to make a call with the SIM?

Hi,
I wonder if its possible to use the Wireless connection manager 5 and to make or receive a call?

Hi,
I see that nobody answered so i will try to explain what i meant -
Is it possible to make audio call with the Wireless Manager by the GSM modem module?
I succeed to send SMS and to connect to HSPA data services but i dont find any reason why i can not connect to the GSM and make a call.
I have Portege R600 model PPR61E-01C00NG3
I even succeed to use the GPS that probably installed in the GSM/HSPA modem (wireless manager 5).
If anyone can explain how and if it possible to make a call please send your reply ... i wnat to use the laptop with BT instead of cell phone ....
Thanks
Yan

Case number 0123115765 ser no serial numbers removed send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without

case number 0123115765 ser no <serial numbers removed> send me the download of the mac version please. You are the most troublesome to make a change did the same with Norton they handled it over the computer without any fuss!!! Regards answer via email what to do! Regards Bo

Call Apple to get the replacement DVD > http://support.apple.com/kb/HE57 When you have the DVD, insert it and install iPhoto. Finally, open  > Software Update and install the most recent version

E71 : Is it possible to make a shortcut to the mai...

Is it possible to make a shortcut to the mail for exchange inbox? I am used to having the inbox accessable from the main screen and I would like to find a work around.
Any ideas?
Message Edited by massi on 16-Aug-2008 12:35 PM

On Eseries device you can assign the Mailbox key to this MfE Inbox.
However, most Nseries devices do not have such a key.

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

My photos are not showing up as layers in the layers panel, only as one layer, so I can't make any changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong?

My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.

barba87623950 a écrit:
My photos are not showing up as layers in the layers panel, only as one layer, so I am not able to make changes to the layers. Does anyone know why this is happening? Am I downloading them from my camera wrong? I have watched the video and the photos don't open that way on my layers panel. Any help would be appreciated, I would like to edit out the background and turn it a different color.
Photos from cameras or scans have only one layer (the 'background' layer).
You can start with that 'background' layer and duplicate it or add other layers in the editing process. For instance you can make a selection of a subject and put it on another layer; a common use is to desaturate the 'background' and to keep the color in the selected subject in your newly created layer.

Sender make some changes to the data

Hi,
Could anybody please answer to this question. In file to idoc scenario, the data has been sent from sender(file) to receiver(R/3) . If the customer wants to make some modifications in the data is it possible to update the receiver system.How can it be achieved.
regards
Pavan

hi,
depends on what you post (on the kind of document):
if the customer sends you sales orders via file - IDOC
then you can just open the sales order in R3 and update it...
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to make/save changes to the file - /etc/httpd/httpd.conf - in Terminal

I'm new to Unix/Terminal and am attempting to make changes in the Apache Web server's configuation file - /etc/httpd/httpd.conf - so that I can use PHP locally. (The "LoadModule php4" has a "#" mark in front of it which I am attempting to remove.) This approach is suggested in the book "Dreamweaver MX 2004 with asp, coldfusion, and php." The book includes instructions on how to adjust the files using pico in Terminal. But the book doesn't explain how to work with Unix/Terminal to enable the right access permission to save the changes in Terminal. I've been able to make the changes in pico the book recommends, but I'm not able to save the changes. I'm the only user of the computer.
Please advise how to be able to save the changes. Thank you!
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9)

jamesk,
httpd.conf is owned by 'root'. therefore, to save your changes you need to use 'sudo' when editing the file. before you do that, you should type in
man sudo
and read about what sudo actually does. be aware that it can give you all-encompassing power to do many things - including messing things up.
once you have read about sudo, first do (substitute full paths, if necessary - e.g. /etc/httpd/httpd.conf for httpd.conf)
sudo cp httpd.conf httpd.conf.bak
to backup your httpd.conf file (in case you make an error), then do
sudo nano httpd.conf
to make your changes, then save the file.
then do
sudo apachectl configtest
to test changes to the server config (it should let you know if there is an error).
finally do
sudo apachectl graceful
to restart the server and re-read the config file.
cheers,
b

Not able to make a change in the row

I get a message - No data found - ORA-01403
when I try and make a change in my row

Hi 994226,
We could use a lot more information. Like:
Full APEX version
Full DB/version/edition/host OS
Web server architecture (EPG, OHS or APEX listener/host OS)
Browser(s) and version(s) used
Theme
Template(s)
Region/item type(s)
and more detail about what you want to do.
Also, If you could read this -- if you haven't already: "Welcome to the Oracle Application Express Discussion Forum!" https://forums.oracle.com/forums/ann.jspa?annID=1324
Are you doing this with Automated Row Processing (ARF)?
Can you tell us details of the application? Whatever is happening is causing it to go to the database and find no data. I usually get this, say, when I update a record and the primary key is changed. Or I delete a record but APEX does a refresh which tries to retrieve it. The process tries to retrieve with the old PK and, of course, NO DATA FOUND. But we don't have enough information to diagnose your error.
Kind Regards,
Howard
Rule #1: Believe the error message.
Rule #2: If you think the error message is wrong, see Rule #1.

It's possible to make simultaneous changes in the following architecture?

Similar Messages

Maybe you are looking for