It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

  • My computer was dropped yesterday and it will not turn on past this gray screen that tells me to reboot it but everytime I reboot it, it just goes back to that same screen and tells me to do it again. Anyone know how to fix this?

    My computer was dropped yesterday and it will not turn on past this gray screen that tells me to reboot it, but everytime I reboot it, it just goes back to that same screen and tells me to do it again. Anyone know how to fix this?

    When you jar or drop a hard drive when it's operating the heads strike the platters and ruin sectors and the data on them.
    Your getting the spinning wheel because the OS has been damaged and/or quite possibly the drive.
    You'll first have to determine if it's a hardware issue
    Do #3 Hardware Test and #5 Disk Utlity Repair Disk/Permissions here (check the SMART status)
    Step by Step to fix your Mac
    If the drive is fine and you don't have a recent copy of your data off the machine then also do this
    Create a data recovery/undelete external boot drive
    Then proceed with fixing the damaged software, likley by #8 your problem will be fixed.
    Step by Step to fix your Mac

  • Is anyone else having problems downloading apps with the new iOS 7?

    Is anyone else having problems downloading apps with the new iOS 7?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • TS1424 I cannot download apps with the iPad, I touch the screen to either download or even to read about the app but nothing happens - any ideas?

    I cannot download apps with the iPad, I touch the screen to either download or even to read about the app but nothing happens - any ideas?

    thank you very much this has solved my problem and for that i am going to give you ten points.
    Kind Regards Alex

  • I don't know why I can't download apps in apps  through wifi but only can download apps in the computer??

    I don't know why I can't download apps in apps store through wifi but only can download apps in the computer??

    See these previous discussions:
    Downloading apps stuck on waiting...: Apple Support Communities
    Waiting applications: Apple Support Communities

  • I just bought an Iphone 5s and it I'm trying for more than an hour to charge it , but it doesn't work. What could be the reason?

    I just bought an Iphone 5s and I'm trying to charge it for more than an hour, it simply doesn't work. What could be the reason??

    ELIZ BARB wrote:
    The screen shows the apple and once in a while turns to blue.
    A couple of things to try: What to do if your iPhone or iPad will not turn on
    And: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If neither of these resolve the problem the phone is almost certainly broken.

  • HT1296 My daughter has an Ipod touch 3.1.3. I know it's old but she doesn't need it for much more than games and music. Does anyone know how or if I can update the Ipod 3.1.3 or is it too old? Thanks!

    My daughter has an Ipod touch 3.1.3. I know it's old but she doesn't use it for anything except games and music. Does anyone know how or if I can update this device or is it just too old?
    THanks!

    A first generation iPod touch can't be updated past 3.1.3. If it's a newer model, update it from iTunes on a computer, and if possible, the one it normally syncs with.
    (98699)

  • TS3682 I have erased my iphone in error and now itunes does not even detect it do I can't restore from the backup

    I have erased my iphone in error and want restore from my backup but all I have ia a black screen with a white apple and its not detected by itunes anyone anyideas to help me

    Place your phone in recovery mode (search Google) and restore.  If that doesn't work, place in DFU mode (again, search Google) and restore.

  • IPad and proxy settings for more than AppStore and Safari?

    Why am I having problems w/ most apps and the proxy settings?  My corp. network requires proxy settings to get to the internet and only the AppStore and Safari (and a few specifically designed apps) will use the proxy settings.  All other apps simply do not work.
    Is this an Apple problem?  Why was this not addressed by Apple?

    NestOfRobins wrote:
    That sounds like a "cop-out" to me.  Do individual applications on desktop machines have to be "proxy aware"?
    Yes, they have. Not only on iPad, but every internet application, on Mac or on PC or on *nix, have to be coded internally to use proxies. Some are, and are also smart enough to check for any proxy info on network options of your system, some other will have the proxy info to be given in internal application setup, and some other, simply does not know what proxies are.
    NestOfRobins wrote:
    How can Apple expect to compete in the Enterprise space with this glaring hole in their operating system?  Why can't there be a setting, e.g., "all internet traffic to use proxy server".?
    That is a SOCK, and is another different stuff. There is no hole in the O.S., it is the app you want to use, because that app wants connect the internet by herself, without using your proxy.
    Best advice is, you ask that app's developer, to add in future releases, proxy connectivity or (best) to check if network requires a proxy and act accordingly without bother the user on the issue
    Anyway, I'd like answer also your other questions:
    NestOfRobins wrote:
    Why am I having problems w/ most apps and the proxy settings?
    You have problems because that apps don't think about the proxy setting you have in your network configuration (app poorly coded), or they require direct internet access in their specs (app aware of proxy, and do not want use it), access that you don't have because of proxy. Not your fault. Nor Apple's
    NestOfRobins wrote:
    this an Apple problem?  Why was this not addressed by Apple?
    Not an Apple problem, so there is nothing to address.

  • "Back" arrow doesn't work sometimes when I want to go back to a previous page, especially when I'm managing an item on my Craigslist account and I want to get back to my account home page from the item I'm looking at.

    I don't know what other details I can provide. I don't have the problem with Safari. I did recently update Firefox.

    It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

  • Can included apps with the iPad air be deleted (garageband, pages and the other iWork apps)

    Planning on purchasing an iPad air and I just wanted to know if these apps were permanent on the iPad air or if you could delete them
    Or do you have to install them yourself

    They are not preinstalled and are available as a free download after you've registered and activated your new iPad (after Sept 1, 2013). They are then yours to delete (they are stored in the cloud if you do) or install on any of your compatible iDevices as long as you use the same Apple ID.

  • I have a brand new iphone 4 but after trying to activating it through wifi it says to connect to iTunes on a computer to complete the activation process.

    What can I do?

    Young justice wrote:
    What can I do?
    Do what it told you to do.

  • Premiere Pro and Soundbooth won't play video/audio for more than a second.

    Ok, so my issue is that Soundbooth won't play audio for more than a second. It plays a quick bit then stops. Premiere Pro also does the same with video, it plays a quick bit then stops. I don't know if it is connected or not but when I try to change the audio output in Soundbooth to System Default I get this error:
    I set the permissions to premiere and soundbooth to full but it didn't work. I've tried UnInstalling and ReInstalling but that didn't fix the issues either. All of the other programs seem to work. Any help would be much appreciated!!

    Here is the fix.
    1. Open Finder and navigate to /YOUR_HD/Library/Preferences
    2. Rename or move to the Trash the file:   com.apple.audio.AggregateDevices.plist
    3. Relaunch The Program

  • Attach Database running for more than 2 days

    Hi,
    I have a sql sever 2005 database of SAP development which is having a deferred transaction error while DBCC.  After restart the SQL log says the below. Still the DBCC error exists.
    2013-04-19 14:27:22.10 spid14s     Recovery of database 'BDS' (5) is 99% complete (approximately 3 seconds remain). Phase 2 of 3. This is an informational message only. No user action is required.
    2013-04-19 14:27:22.10 spid14s     1830496 transactions rolled forward in database 'BDS' (5). This is an informational message only. No user action is required.
    2013-04-19 14:27:22.71 spid14s     Recovery of database 'BDS' (5) is 99% complete (approximately 3 seconds remain). Phase 3 of 3. This is an informational message only. No user action is required.
    2013-04-19 14:27:23.34 spid14s     CHECKDB for database 'BDS' finished without errors on 2012-10-14 19:22:43.603 (local time). This is an informational message only; no user action is required.
    I have copied the mdf, ndf and ldf file to another location and try to attach the database it is running for more than 2 days now. Still not given any error.  DVM  shows the create database  status as running.  The SQL Log shows the below
    message.
    2014-03-29 19:19:52.04 spid52      Recovery of database 'BDS' (8) is 99% complete (approximately 3 seconds remain). Phase 2 of 3. This is an informational message only. No user action is required.
    2014-03-29 19:19:52.04 spid52      5313464 transactions rolled forward in database 'BDS' (8). This is an informational message only. No user action is required.
    2014-03-29 19:19:52.29 spid52      Recovery of database 'BDS' (8) is 99% complete (approximately 3 seconds remain). Phase 3 of 3. This is an informational message only. No user action is required.
    Please help me to solve this issue.  
    Regards,
    suren

    >I have copied the mdf, ndf and ldf file to another location and try to attach the database it is running for more than 2 days now.
    It is safer to:
    1. Backup the database:
    http://technet.microsoft.com/en-us/library/ms187510.aspx
    2. Copy backup file over to destination server
    3. Restore the database
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Change Capture For Siebel OLTP task in DAC running for more than 10 hours

    whole etl load used to complete in 2 hours (as on now siebel data having sample data). since last Friday Change Capture For Siebel OLTP task in DAC execution plan running for more than 10 hours. I am not able to trouble shoot the problem because no log for this task
    what could be the reason for this problem? how can I fix that problem?
    Appreciate your help
    Thanks
    Jay.

    Which ETL is it that is taking the longest (is it an SDE, SIL, PLP?). I have seen someOracle vanilla ETLs coded in a way that is very ineffective. Check the DAC and Informatica logs and find out which mapping it is and where the delay is (e.g. SQL, write to DB..etc).

Maybe you are looking for