It says Login failed. it shows error code: -1 . we have 2 ipads and the other one is log in
My ipad shows Login failed, error code: -1 whereby my husband's ipad is working fine
Well, I wanted to have the audio come from one camera scource and it seemed to be the only way that I could acomplish that by duplicating the cam 2 track. One thing that helped me trouble shoot this was to create a new event and project and optimize all of my media instead of using the proxy, (I don't know why but it worked)
I was able to edit the multicam track with two camera angles and it used the camera 2 angle's audio... as soon as I finished my project and exported the files.. my hard drive crashed. I don't know if it was a buggy software, or a failing drive that caused the blank angles in the original multicam edit. I guess I will have to find out weather or not this new hard drive crashes during my next job.
I appreciate your reply to this post Tom.
Similar Messages
-
hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out
olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao. -
is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't
It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary
-
I have two email accounts set up on my Mail application. Both pull in and send just fine but ever since I upgrade the exchange sever and re-setup the account It won't show the unread (number) to the right of the inbox? The other one shows up just fine. Any clues would be great! Thank you.
Hi Rochdr,
You can use the following article to help you address this issue with your mail account in OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
computer felt hot and while running apple hardware test the screen glitches covered the screen and it froze. Now computer wont boot up. Again AHT code is 4MOT/2/40000004:ADD and I have just seen ODD and HDD codes discussed on other threads.Those were hardrive or superdrive fans, so I am guessing this is a fan issue and then it fried by graphics card. Any help as to whether this is game over or worth repairing would be very appreciated.
You need to take it to your local Apple Store or AASP for a professional evaluation. Apple does not publish the codes from AHT, you can Google the code you got and see if you can determine what it means however the best method is to let a pro handle it.
-
How does one fix error code 2324 that I receive each time I attempt to upgrade my iTunes. Of course now iTunes will not work until this issue is fixed. Thanks, D
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled -
Error code: sec_error_unknown_issuer while opening Gmail and many other trusted websites!
I tried opening G-Mail and some other trusted website and Got "This Connection is Untrusted" with Error code: sec_error_unknown_issuer.
There is no other button then "Get me out of here".
Date/time are also set right.
I am using Eset Smart Security 7 and Firefox on Windows 8 Single.
I faced this problem just 2 days back just in Firefox. All other Browsers (Chrome, Iron, IE10) are working as Normal.
How do i solve this Problem?
RegardsThanks a lot Sir.
It worked wonders. -
Can someone explain why one code works and the other one doesn't?
Hi,
I have been doing a little work with XML today and I wrote the following code which did not function properly. In short, it was as if there were elements in the NodeList that disappeared after the initial call to NodeList.getElementsByTagName("span"); The code completely drops through the for loop when I make a call to getTextContent, even though it is not a controlling variable and it does not throw an exception! I'm befuddled. The second portion of code works. For what it is worth, tidy is the HTML cleaner that's been ported to java (JTidy) and parseDOM(InputStream, OutputStream) is supposed to return a Document, which it does! So why I have to call a DocumentBuilderFactory and then get a DocumentBuilder is beyond me. If I don't call Node.getTextContent() the list is processed properly and calls to toString() indicate that the class nodes are in the list! Any help would be appreciated!
import com.boeing.ict.pdemo.io.NullOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.PrintWriter;
import java.util.Properties;
import org.w3c.dom.Document;
import org.w3c.dom.NodeList;
import org.w3c.tidy.Tidy;
public class HTMLDocumentProcessor {
// class fields
private Properties tidyProperties = null;
private final String tidyConfigFile =
"com/boeing/ict/pdemo/resources/TidyConfiguration.properties";
* Creates a new instance of HTMLDocumentProcessor
public HTMLDocumentProcessor() {
initComponents();
private void initComponents() {
try {
tidyProperties = new Properties();
tidyProperties.load(ClassLoader.getSystemResourceAsStream(tidyConfigFile));
} catch (IOException ignore) {
public Document cleanPage(InputStream docStream) throws IOException {
Document doc = null;
NullOutputStream nos = new NullOutputStream(); // A NullOutputStream is
// is used to keep all the
// error output from printing
// check to see if we were successful at loading properties
if (tidyProperties.isEmpty()) {
System.err.println("Unable to load configuration file for Tidy");
System.err.println("Proceeding with default configuration");
Tidy tidy = new Tidy();
// set some local, non-destructive settings
tidy.setQuiet(true);
tidy.setErrout(new PrintWriter(nos));
tidy.setConfigurationFromProps(tidyProperties);
doc = tidy.parseDOM(docStream, nos);
// assuming everything has gone ok, we return the root element
return doc;
public static void main(String[] args) {
try {
String fileName = "C:/tmp/metars-search.htm";
File htmlFile = new File(fileName);
if (!htmlFile.exists()) {
System.err.println("File : " + fileName + " does not exist for reading");
System.exit(0);
FileInputStream fis = new FileInputStream(htmlFile);
HTMLDocumentProcessor processor = new HTMLDocumentProcessor();
Document doc = processor.cleanPage(fis);
if (doc == null) {
System.out.println("cleanPage(InputStream) returned null Document");
System.exit(0);
NodeList spanTags = doc.getElementsByTagName("span");
int numSpanTags = spanTags.getLength();
System.out.println("Number of <span> tags = " + numSpanTags);
for (int i = 0; i < numSpanTags; i++) { // Loop falls through here!
System.out.println("Span tag (" + i + ") = " +
spanTags.item(i).getTextContent());
} catch (Exception e) {
e.printStackTrace();
} finally {
System.exit(0);
}This segment of code works!
import com.boeing.ict.pdemo.io.NullOutputStream;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.PrintWriter;
import java.util.Properties;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.parsers.ParserConfigurationException;
import org.w3c.dom.Document;
import org.w3c.dom.NodeList;
import org.w3c.tidy.Tidy;
import org.xml.sax.SAXException;
* Class designed to remove specific notam entries from the
* HTML document returned in a request. The document will contain
* either formatted (HTML with CSS) or raw (HTML, pre tags). The
* Formatted HTML will extract the paragraph body information from the
* document in it's formatted state. The raw format will extract data
* as simple lines of text.
* @author John M. Resler (Capt. USAF, Ret.)<br/>
* Class : NotamExtractor<br/>
* Compiler : Sun J2SE version 1.5.0_06<br/>
* Date : June 15, 2006<br/>
* Time : 11:05 AM<br/>
public class HTMLDocumentProcessor {
// class fields
private Properties tidyProperties = null;
private final String tidyConfigFile =
"com/boeing/ict/pdemo/resources/TidyConfiguration.properties";
* Creates a new instance of HTMLDocumentProcessor
public HTMLDocumentProcessor() {
initComponents();
private void initComponents() {
try {
tidyProperties = new Properties();
tidyProperties.load(ClassLoader.getSystemResourceAsStream(tidyConfigFile));
} catch (IOException ignore) {
public Document cleanPage(InputStream docStream) throws IOException {
Document doc = null;
NullOutputStream nos = new NullOutputStream(); // A NullOutputStream is
// is used to keep all the
// error output from printing
ByteArrayOutputStream bos = new ByteArrayOutputStream();
// check to see if we were successful at loading properties
if (tidyProperties.isEmpty()) {
System.err.println("Unable to load configuration file for Tidy");
System.err.println("Proceeding with default configuration");
Tidy tidy = new Tidy();
// set some local, non-destructive settings
tidy.setQuiet(true);
tidy.setErrout(new PrintWriter(nos));
tidy.setConfigurationFromProps(tidyProperties);
doc = tidy.parseDOM(docStream, bos);
DocumentBuilderFactory docFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder docBuilder = null;
try {
docBuilder = docFactory.newDocumentBuilder();
} catch (ParserConfigurationException ex) {
ex.printStackTrace();
try {
doc = docBuilder.parse(new ByteArrayInputStream(bos.toByteArray()));
} catch (IOException ex) {
ex.printStackTrace();
} catch (SAXException ex) {
ex.printStackTrace();
// assuming everything has gone ok, we return the root element
return doc;
public static void main(String[] args) {
try {
String fileName = "C:/tmp/metars-search.htm";
File htmlFile = new File(fileName);
if (!htmlFile.exists()) {
System.err.println("File : " + fileName + " does not exist for reading");
System.exit(0);
FileInputStream fis = new FileInputStream(htmlFile);
HTMLDocumentProcessor processor = new HTMLDocumentProcessor();
Document doc = processor.cleanPage(fis);
if (doc == null) {
System.out.println("cleanPage(InputStream) returned null Document");
System.exit(0);
NodeList spanTags = doc.getElementsByTagName("span");
int numSpanTags = spanTags.getLength();
for (int i = 0; i < numSpanTags; i++ ) {
System.out.println(spanTags.item(i).getTextContent().trim());
} catch (Exception e) {
e.printStackTrace();
} finally {
System.exit(0);
}Thank you Dr but the following is true:
I placed this code in the for loop before I posted the question :
for (int i = 0; i < numSpanTags; i++) { // Loop falls through here!
System.out.println("Span tag (" + i + ") = " + spanTags.item(i));
}And I receive 29 (The correct number) of non-null references to objects (Node objects) in the NodeList.
When I replace the exact same for loop with this code :
for (int i = 0; i < numSpanTags; i++) { // Loop falls through here!
System.out.println("Span tag (" + i + ") = " + spanTags.item(i).getTextContent());
}Nothing prints. This discussion has never been about "clever means to suppress exceptions" it has been precisely about why a loop that has the
exact same references, exact same indices prints one time and doesn't print the other and does not throw an exception. If you can answer
that question then I am interested. I am not interested in pursuing avenues that are incorrect, not understood and most importantly shot from the hip without much thought. -
The Header describes my question, but is ther some way to recover it not by e-Mail becasue it's not going through and I don't know the birth year that was put down?
Thanks!Delete those apps that are not under your Apple ID and re-download them using your Apple ID.
-
I have a problem for download in app store . it shows error code : 1009
i have a problem for download in app store . it shows error code : 1009
https://discussions.apple.com/thread/2439043
-
my ipod classic 160 gb keeps showing error code 1439 and says it is corrupted and i have done everything the article on it says to do and still reads the same thing. has anyone else had the same problem if so what can i do to fix it. the ipod is only 2 months old
If it is under warranty, bring it in to Apple Store, most of our suggestions, comes from the Apple support site..
Besides Restoring the iPod, there are winsocks which have conflict with iTunes, perhaps, disable those plugins and disconnect the Internet and stop antivirus, while you are Restoring or Syncing the iPod. -
BIG QUESTION!!!!
My mini ipad has frozen and won't let me restore showing 3014 error code. I have tried all suggestions to correct error and now is frozen saying connect to itunes which just shows the error message.. Can't i just reboot it somehow?Hi annababs,
This article has troubleshooting specific for error 3014:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
If that does not work, this article may be able to help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Take care,
- Ari -
Help, my iphone is in recovery mode, and itunes shows error code 1
help me, please. my iphone 4 is stuck in recovery mode, and when trying to restore, itunes shows " error code 1, an unknown error occurred"
please help!!!me to ;/
[23:05:36.0982] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[23:05:36.0982] [nand_part_core:INF@3169] next 98 pages of boot blocks written with LLB image of size 150080 bytes
[23:05:36.0982] [nand_part_core:INF@3172] final 156 pages of boot blocks written with random data in full page format
[23:05:36.0982] entering update_gas_gauge
[23:05:36.0982] entering update_ir_mcu
[23:05:36.0982] looking for mcu nub...no entry from path!
[23:05:36.0982] TiSerialFlasher not supported on this platform. Exiting.
[23:05:36.0982] entering update_baseband
[23:05:36.0982] update_baseband: registering for progress notifications
[23:05:36.0982] create_baseband_update_options: Got imeisv: 16
[23:05:36.0982] baseband updater options = <CFBasicHash 0x17533030 [0x59b710]>{type = mutable dict, count = 7,
[23:05:36.0982] entries =>
[23:05:36.0982] 0 : <CFString 0xcf1e38 [0x59b710]>{contents = "SystemRoot"} = <CFString 0x1761cb70 [0x59b710]>{contents = "/mnt1"}
[23:05:36.0982] 5 : <CFString 0xcf1dc8 [0x59b710]>{contents = "DisallowFusiing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 6 : <CFString 0xcf1f48 [0x59b710]>{contents = "autoSetupEnv"} = <CFBoolean 0x59b918 [0x59b710]>{value = false}
[23:05:36.0982] 7 : <CFString 0xcf1e48 [0x59b710]>{contents = "DataRoot"} = <CFString 0x1761e8e0 [0x59b710]>{contents = "/mnt2"}
[23:05:36.0982] 8 : <CFString 0xcf1d98 [0x59b710]>{contents = "forceUpdate"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 9 : <CFString 0xcf1f58 [0x59b710]>{contents = "disablePing"} = <CFBoolean 0x59b910 [0x59b710]>{value = true}
[23:05:36.0982] 10 : <CFString 0xcf1eb8 [0x59b710]>{contents = "IMEISwVersion"} = <CFNumber 0x17533010 [0x59b710]>{value = +16, type = kCFNumberSInt32Type}
[23:05:36.0982] }
[23:05:36.0982] update_baseband: querying baseband info
[23:05:36.0982] bbupdater: BEGIN: Querying info at stage first
[23:05:36.0982] bbupdater: BEGIN: Preparing first stage
[23:05:36.0982] bbupdater: Requested boot mode: kBBUBootModeNone
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 5...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 4...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 3...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 2...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 1...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: powercycling modem
[23:05:36.0982] bbupdater: Creating transport, attempts remaining 0...bbupdater: FAILED(kBBUReturnIOError)
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Preparing first stage
[23:05:36.0982] bbupdater: END(kBBUReturnIOError): Querying info at stage first
[23:05:36.0982] send_bbupdate_status: sending baseband update status to host
[23:05:36.0982] update_baseband: calling CFNotificationCenterRemoveEveryObserver
[23:05:36.0982] update_baseband: bbupdater error: The operation couldn\U2019t be completed. (BBUpdater error 3 - Failed creating a communication transport to baseband.)
[23:05:36.0982] 0: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 1: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] unable to convert ramrod error 1004
[23:05:36.0982] restore failed with CFError:
[23:05:36.0982] 0: AMRestoreErrorDomain/ffffffff: failed to update device firmware
[23:05:36.0982] 1: AMRestoreErrorDomain/ffffffff: ramrod firmware update failed
[23:05:36.0982] 2: RamrodErrorDomain/3ec: update_baseband: failed querying baseband info
[23:05:36.0982] 3: BBUpdater/3: Failed creating a communication transport to baseband.
[23:05:36.0982] waiting for host to acknowledge final status received...
[23:05:36.0982] void AppleUSBDeviceMuxXXXXXXXXXXXXXXXXXXX(mbuf_t) received reset, closing 0x97b1e4d0
[23:05:36.0982] recv(12, 4) failed: connection closed
[23:05:36.0982] unable to read message size: -1
[23:05:36.0982] received NULL message from host, expected final status
[23:05:36.0982] attempting to dump restore log
[23:05:36.0982] writing log file: /mnt1/restore.log -
HT1218 Time Capsule is showing error code -6584)
My Time Capsule is showing error code - "An unexpected error occurred (error code -6584)"; can someone tell me what this means? Correlated, Time Machine does not show any backed up data although it says that ~400 GB out of 1 TB is remaining.
On the More Like This.. see the various very common complaints.. just to the right >>>
First one is good.. anything Pondini responds to listen. https://discussions.apple.com/message/17748380#17748380
A simple reboot of the whole network.. from off.. modem .. router/TC.. clients.. 2min gap will probably fix it.
If it keeps happening, tell us your OS. (Most likely Mountain Lion.. which has networking ability of wet string and a pair of tin cans). -
RAID Mirror failed - help interpreting error code?
Hi all - I run the primary disk mirrored on my Dual 2.0 Xserver (10.4.7) using Apple's software RAID. No problems for two years, but found this am a warning on System Monitor, showing my RAID as degraded - one disk had dropped out of the set. All functions continued forward without interruption.
Here's all the system log has to say:
Aug 12 18:29:34 mail kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC), member E612F8B0-3082-4222-A9FE-B58D35CDA3B8, set byte offset = 907558912.
Aug 12 18:32:39 mail kernel[0]: AppleRAID::recover() member E612F8B0-3082-4222-A9FE-B58D35CDA3B8 from set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC) has been marked offline.
Aug 12 18:32:39 mail kernel[0]: AppleRAID::restartSet - restarting set "Xserver80G" (9477A440-E50F-11D9-B65B-000D939C5BEC).
The System Monitor shows no pre-failure warnings on the HD's themselves, and I'm assuming there was an error in the mirroring, and the RAID software gracefully dropped the offending volume.
My questions are: Any help interpreting the error code so I can narrow down the likely cause, if any? any ideas what causes this kind of error? Is it likely to recurr?
Any help much appreciated. I'll be rebuilding the set tomorrow after working hours.The RAID set got out of sync. You might see this from time to time if you use Apple's raid driver.
Take a look at softraid.com for a better driver.
Maybe you are looking for
-
I have an iPod with iOS 4.2.1 and would like to up date to version 5. The pc I normally sync with has XP operating system. So I can't up date to iTunes 10. And my iPod doesn't show the software update button shown in the article. What can I do?
-
Playing embedded sound in a windows office doc on a mac
Does anyone know if it is possible to play embedded sounds created in word docs on a windows machine on the Mac. Office for Mac does not work. The file seems to be looking for the windows recorder. Does anyone have any ideas for a workaround? Thanks
-
Please help me find complete instructions to remove Acrobat 6.0 and 7.0. They do not appear in add remove programs. I now have Reader 8.0. Thanks Frank C Win XP SP 3 Dell Dimension 8400
-
Hi, I have got this Generator&Acquisition vi that saves digital data from a pickup signal and adds 10kHz to the driving signal when I press the "Save and add 10kHz" button. I would like to automate this so that I don't have to press this button for e
-
Should I install Apache Web server to use Jakarta Tomcat Servlet engine?
Hello, I have some problems and now have a question: Should I install Apache Web server to use Jakarta Tomcat Servlet engine? JTK home page is available via http://localhost:8080 Tomcat ver 3.1.3 Thanks.