It says my iPad is low on memory when it's not.

When I play certain games that involve save files, it won't let me make save files because it says I don't have enough memory, even when I have 44 oit of 64gb left. I've closed all my running apps besides the game and I've turned my iPad on and off. Any help?

if you are relying strictly on what you see on Settings>General>Usage>Storage>Manage Storage - and to do not use iTunes with your iPad - you might not be seeing something critical that can be using up the storage space on your device. It may be that "other" data is taking up all of the storage and you can only see that when the iPad is connected to your comouter's iTunes.
THere are many web articles that describe ways of getting rid of a large amount of "other" data. Take a look at these.
http://www.howtogeek.com/194292/what-is-other-storage-on-an-iphone-or-ipad/
http://www.imore.com/what-other-storage-category-iphone-and-ipad-and-how-fix-it
http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/
You cannot get rid of all of it and you don't want to get rid of it all because it is data that you need. It should never be a large amount like 10 GB. If it grows too large, that usually indicates something has gone corrupt on the device and sometimes the only way to bring it back down to where it should be is to restore as new.

Similar Messages

  • HT5654 My iPad is low on memory and it says to turn off apps running in background . How do I do that

    My iPad is low on memory and it says to turn off apps running in background . How do I do that

    Hello Skittles1202
    It sounds like more of the storage of your iPad is full. Plug it into your computer and check in iTunes or on your iPad go to Settings > General > Usage and it will sort out in order of what is taking up the most space. Once you figure that out you can either delete what is not needed or import any photos that you may have to your computer. If you want to close out any application that you may have open previously, then double tap the home button and then swipe up on any app that you want to close
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    Regards,
    -Norm G.

  • I got a message saying this ipad cannot be backed up because there is not enough icloud storage available but when i try to close it it didnt gone looks like it got hang

    i got a message saying this ipad cannot be backed up because there  is not enough icloud storage available but when i try to close it it didnt close its looks like get hang up

    Try this now.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • My ipad says : this ipad cannot be backed up because there is not enough icloud storage available . you can manage your storage in sttings ..... i dont understand .. i need you help me please

    my ipad says : this ipad cannot be backed up because there is not enough icloud storage available . you can manage your storage in sttings ..... i dont understand .. i need you help me please

    Hi jasmin,
    Did you read what Demo wrote? He wasn't saying he had a problem. He was responding to the OP who had a problem, and was providing a solution. Follow what Demo said to do....
    Cheers,
    GB

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I can 'see' my wireless printer but my iMac believes it is low on loner when it is not.  How can I clear this condition?

    I can 'see' my wireless printer but my iMac believes it is low on loner when it is not.  How can I clear this condition?

    Remove the toner cartridge and gently shake it from side to side while holding it level (in the position it is in while in the printer). Re-insert the cartridge, restart (power cycle) the printer. Then restart the Mac and test.

  • Message saying my I Cloud storage is full when it is not?

    I keep getting messages saying my I Cloud storage is full .. when it is not.. 

    <Edited by Host>
    Restore the device to clean up OTHER. If Other is still over 2 gbs after restoring, restore again as new.

  • Macintosh Clients keep saying that they are up to date when they are not!!

    All My Macs keep saying that they are up to date when looking at the local SUS server. There not up to date and there are loads of updates that are downloading onto the SUS, do I have to wait for the updates to finish downloading before the cleints can get their updates?

    Hi
    When inspecting the updates in the Service GUI do they have a light blue circle by the side of the update? If they don't they've not been downloaded yet.
    Depending on your internet connection and bandwidth it can take up to 3 days (sometimes longer) to download them all. Once downloaded they should be available assuming everything else is configured as it should be. By this I mean, as a minimum, a correctly configured DNS Service that does not involve the use of .local for the domain suffix.
    HTH?
    Tony

  • When I tried to update to os6 on my iPad2, it says "Your iPad was updated successfully, but when I hit "continue" the bar turns blue, but nothing happens. I powered off and restarted, but nothing changed.

    When I tried to update to OS6 on my iPad 2, it got as far as "Your iPad was updated successfully. There are just a few more steps to follow, and then you're done!" The Continue bar at the bottom turns blue momentarily, then back to white. Nothing happens. I powered off and back on, still nothing. When I use the "Home" button, it says "Setup incomplete" but won't continue. Any thoughts?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • "System is running low on memory" when exporting.

    I'm using Premiere Pro CS3 (which, I'm aware has issues with system memory due to it being a 32bit program.)
    It only seems to happen when I tie all my video segments together. It warns me to "save my project and proceed with caution," but as I export, it gets to 300 frames out of 12,000 and the entire program just crashes. All up they'd equal 2GB at the most with my export settings.
    I've stopped any non-essential programs and applications, including my anti-virus out of desperation. (How clever)
    I'm running Windows 7 Professional 64-bit SP1
    Intel Core i7 3.60GHz CPU
    16.0GB DDR3 RAM
    60GB SSD as my OS (with 4.7GB free)
    And am saving them to a 1TB HDD with more than enough room free.
    As I'm exporting, my CPU and RAM are running well below 30%
    As far as memory is concerned there's plenty of it. But, is there a way to increase how much Premiere Pro uses, similar to hosting a Minecraft server?
    Or perhaps just tricking it?

    As you are using PrPro CS 3, though on a 64-bit OS, I would also look at the Windows Virtual Memory (Page File) settings.
    What is the size set for the Page File?
    Where is the Page File located on your system?
    Do you let Windows dynamically manage the Page File, or have you manually set its size?
    For video editing, I set my Page File fairly large, and remove the Windows dynamic Page File management. That has worked well for me, and many others.
    Good luck, and I am sure that Jim Simon will Move your post to the CS 4 & Earlier Sub-forum.
    Hunt
    [Edit] PS - Jim DID Move the post, while I was typing.

  • TS4036 my ipad is frozen-it says the ipad cannot be backed up because there is not enough icloud storage space.  It prompts you to manage your settings but it is completely frozen and won't respond when you hit "close" or "settings"

    My ipad froze after the icloud attempted a backup and there isn't enough storage space.  It will not respond when I click "close" or "settings" to monitor my icloud storage.  Any suggestions?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • It says my iPad has 700 mb, but when I try to download a game that is only 300mb it says I have no space available. I have shut it down and turned it back on, and nothing changed. Can anyone help?

    I don't know why it won't let me download a game when I have enough space. help please.

    I'm not 100% sure of how this works - but it works something like this  -You typically need twice the amount of space required and maybe even more to allow the download to "expand" when it completes. Like on a computer, the download size is smaller than what the finished size of the app will eventually be, so even though the download is only 300 MB, it may expand to a size that exceeds what space you have left.

  • My iPhone will not play music, and says it's connected to a dock when it's not. Help?

    My iPhone will not play music. Whenever I try to play music through the speakers on my iPhone it won't let me adjust the volume (like it's connected to a dock) and when I do connect it to a dock, the music plays through the iPhone speakers. Also I've tried just listening to my music through earphones and it plays for around 6 seconds then it goes back to like it's connected to a dock. Help? I've tried turning it off and on, restarting it and even restoring it and nothing's worked.

    It says this when not connected to the dock. His dock is an ihome which isn't an official Apple dock. I think my next step is to take the thing in to an Apple store.

  • DVR says it's full and stops recording when it's not

    About 10 times over the past 3 months, I've gotten an on screen message saying the dvr was full and it would stop recording.  When I would go to check how full the drive was it would be 10%, 7%, 20%.  Very rarely does it go above 50% full.  Anyone have this happen to you?

    To fix the space being reported incorrectly press menu, then go to CUSTOMER SUPPORT, then IN HOME AGENT, then SET TOP BOX AUTO CORRECTION. Please let us know if further assistance is required.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Final Cut won't open, says identical serial number running on network when it's not

    I've been running my Final Cut Pro version 6.06 on my Mac 0S X (v. 10.7.5) for years without an incident. This is the only machine it's installed on. I left a project open overnight, and when I came to it this morning there was an error: This application cannot continue because another application with an identical serial number is already running on another computer on your network.
    The project then closes and everytime I try to reopen, the same error appears. If anyone can help fast I would appreciate it.
    Again, this is the only computer running Final Cut Pro under my serial number, so I'm truly baffled as to why this problem came out of the blue. Restarting the computer's not helping. The only way I can use Final Cut right now is by disconnecting to the Internet.

    I tried the preference manager (thank you, good program to have) but in this case it didn't do the trick.
    I'm on a desktop PowerMac connected to a router via Ethernet. Every other device is connected via wifi, including my iPhone, iPad, my wife's laptop, her iPhone, and her iPad. None of these other devices have anything related to Final Cut installed on them, which is why this is so baffling. Plus this problem literally came out of nowhere.
    I'll still try disconnected each device one at a time...

Maybe you are looking for

  • How to determine the contract header's valid period...

    1. How to determine the service contract header's start date, end date, when related muliple items with different start date and end date? i.e., what is the different between the header's valid period and item valid period? For example: Sold to A has

  • Pld printing extra pages

    hi i seem to have a problem with print layout designer. it seems to be printing extra pages for my clients AR invoice. it does not happen every time though. the client works with data brought into sap through a add on. we also feel that the problem c

  • Strange characters when writing files

    I've made a program using a FileWriter. The program is coded and compiled on a Linux PC. I'm using the filewriter to dynamically write HTML-lines. I use "\r" to write returns. On my Linux PC and on my Windows XP sp2 laptop it works fine. On the PC of

  • Why is UTL_DBWS is doing a POST when calling a webservice??

    Hi everyone, I was testing the UTL_DBWS package with a 10.2.0.2.0 database to get a call to a webservice on an Oracle AS. My PL/SQL code is like this: declare l_service sys.UTL_DBWS.service; l_call sys.UTL_DBWS.call; l_result ANYDATA; l_wsdl_url VARC

  • Are Classes better than Function groups and Modules

    Hi, Are classes better than Function groups? For example if you want to execute something is back ground or use parallel processing you can't do it using classes. Even inside classes most of the places we use Function modules. Then how classes are be