It seems the point has been missed....

After many hours trying to get out fo the "Cloud" mess -I recently noted that all the Holidays (religious) have disappeared from Apple Calendar choices.
That fact is evident, the question is WHY! We ought not to have to keep looking elsewhere until you find a replacement.
I joined the Apple "conglomerate" 5 years ago hoping they would continue to support their CLIENT BASE, but alas, more and more I see them abandoning us!
Truly, not a healthy business plan!
Bob P.

A number of subscription calendars, made by third-party authors not Apple, were hosted on the web.me.com server (part of the now defunct MobileMe) and their authors have never got round to hosting them on a server which works. It looks as if Apple have now decided to remove them from the listing, which makes sense rather than have people wondering why the links don't work.
It's no good complaining about Apple - you would need to complain to the authors who appear to have lost interest in their products.

Similar Messages

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

My daughter ipod touch has been missing for at least a month, tried the find my iphone but her battery is dead is there any other ways to find it??

My kids ipod touch 4 has been missing for 2 months I tried the find iphone app but her battery is dead so I get no sound or signal, is there any other ways to find it??

Only the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

"The destination has been deleted" & messages missing!

The server nohup.out is showing the stack trace below with the message, that "The destination has been deleted". However, the destination is still visible in the Weblogic console.
          I could live with this message, if our application would still work properly. After 3 weeks of successful working, some (perhaps 5%) messages are missing and are not delivered to the topic subscribers. However, if this message is really correlated to our problem is not clear.
          We use a Weblogic 9.2 cluster with 3 Nodes. A JMS distributed JMS topic is configured with a member on each node. The messages are persistent. As the application sends a message and stores data to a DB, we use JMS XA factories and XA jdbc drivers. Durable subscribers are connected to the topic members. There are no current and pending messages for the durable subscribers. However, the current messages count of the topic member are 17, 392, and 3636 respectively.
          What to do? How to debug this problem?
          Peter
          <Mar 18, 2008 6:32:16 AM MET> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destination member datadispatcher-jms-module!HandlerTopic-2: weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
          weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
          at weblogic.jms.dispatcher.Request.handleThrowable(Request.java:63)
          at weblogic.jms.dispatcher.Request.getResult(Request.java:51)
          at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:475)
          at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:285)
          at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
          at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
          weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
          at weblogic.messaging.dispatcher.Request.getResult(Request.java:291)
          at weblogic.jms.dispatcher.Request.getResult(Request.java:49)
          at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:475)
          at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:285)
          at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
          at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
          weblogic.jms.common.JMSException: weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
          at weblogic.jms.backend.BEDestinationImpl.tranForward(BEDestinationImpl.java:2189)
          at weblogic.jms.backend.BEDestinationImpl.invoke(BEDestinationImpl.java:1503)
          at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
          at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:276)
          at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:141)
          at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:36)
          at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:112)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
          weblogic.messaging.kernel.IllegalStateException: The destination has been deleted
          at weblogic.messaging.kernel.internal.DestinationImpl.checkDeleted(DestinationImpl.java:217)
          at weblogic.messaging.kernel.internal.DestinationImpl.checkDestinationState(DestinationImpl.java:394)
          at weblogic.messaging.kernel.internal.QueueImpl.send(QueueImpl.java:304)
          at weblogic.messaging.kernel.internal.TopicImpl.send(TopicImpl.java:155)
          at weblogic.jms.backend.BEDestinationImpl.tranForward(BEDestinationImpl.java:2161)
          at weblogic.jms.backend.BEDestinationImpl.invoke(BEDestinationImpl.java:1503)
          at weblogic.messaging.dispatcher.Request.wrappedFiniteStateMachine(Request.java:759)
          at weblogic.messaging.dispatcher.DispatcherServerRef.invoke(DispatcherServerRef.java:276)
          at weblogic.messaging.dispatcher.DispatcherServerRef.handleRequest(DispatcherServerRef.java:141)
          at weblogic.messaging.dispatcher.DispatcherServerRef.access$000(DispatcherServerRef.java:36)
          at weblogic.messaging.dispatcher.DispatcherServerRef$2.run(DispatcherServerRef.java:112)
          at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
          at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
          >
          Edited by peter05 at 03/18/2008 9:13 AM

Please investigate these possibilities:
          * Is it possible that the Destination you have looked up from JNDI is stale?
          In other words, did you do the destination=context.lookup(distributedDestinationMember) only once in your application, but afterwards one or more of the servers has rebooted?
          If so, you should re-create the initial context after the server has gone down, and refresh the destination with a new context.lookup
          * Are you sure the durable subscription has been created before the first message has been sent?
          Messages sent before the subscriber has been created will be missed by this dur sub.
          === a combination of both of these:
          When a durable subscriber is created, WLS JMS looks to see if the subscription has CHANGED and should be replaced. Unfortunately if you are using a STALE destination from a previous boot, the destination will not match.
          This may inadvertently replace an existing dur sub that has messages with a new one that has no messages.
          Sal Gambino, BEA Messaging Team Lead

A NULL interface pointer has been dereferenced

This was an answer to someone who had this error message. I scoured the web to see what I could find. This is what I wrote to him. Does anyone else have any answers or know a work around???
Hello,
After doing some research on the error message, "A NULL interface pointer has been dereferenced". There may be a work around.
Are you on a Mac? If you are, you may want to try updating CS4 and Installing the 9.0.2 update either manually or using the Adobe Update Manager. However you mentioned you exported to AVI which I know is a PC codec. Still maybe there is a adobe update for the PC as well.
Also, if you are using video footage that uses interframe compression in any of the video placeholders (mpeg, h.264, mp4, etc), or if you have one or two mp3 or aic audio files, that may be an issue as well.
If that's the case, convert audio files to aiff or wav, and convert the video into something that doesn't use interframe compression. Maybe Photo Jpeg, Animation, or apple pro res.
Are you using just pictures? If so, then that info won't help either.
If you are just changing the text and using pictures, I'm not sure why you are getting the NULL interface error.
Answer the questions above and I'll try and help you out some more.
Thanks,
Cassidy Bisher
President
DropDrop
http://www.dropdrop.com
Hello once again,
If you could review this small issue I had with one of the templates or forward this to the customer service department.
I have been attempting to render the Grid Warp Final Main Comp for some time now. It took me about 10 minutes to swap the text and pictures out, but the rendering process has taken me over 20 hours and I still havent been able to pinpoint the issue. I have tried rendering in After Effects CS3 and After Effects CS4 both which give the same result. The rendering process will get to anywhere from 400-600 frames and it will give me a warning saying: "After Effects warning: A NULL interface pointer has been dereferenced." Right after clicking OK on this warning another window comes up saying After Effects error: Quicktime export failed (14). This happens whether I export as FLV or if I use the render queue to do avi. Please advise on a possible solution when you have a chance as this heavily delayed our project time line. I have made sure there is no missing files in the project.
David

I got the same exact error in Windows 7. Seems to be a video inside the composition or a part of the composition itself thats the problem. I've tried increasing both the swap space and the ram usage. Still nothing but the video does push a solid 3 gigs of ram usage. I'm using cs3 myself.

Error message: ni: A frame has been dropped and the acqusition has been canceled

I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
Do you have any pointers why this error message appears and what can be done about it?
Thank you!
Reto

Hello,
I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
I also want to know how to solve that.
Yang

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels

I imported a COMPLETED book project into Aperture 3, only to discover that the resolution of all the photos has been reduced to totally unacceptable levels. Any easy solution?
Steps:
1. I finished an Aperture 2 (Two) book project and tried to submit it to Apple for printing. At that point I learned (belatedly, obviously) that Apple no longer accepts books from Aperture 2. I don't know how I would have known to even ask if Aperture 2 had been sunsetted as far as book projects go.
2. So I tried to download Aperture 3 ($79.99), only to be told that I couldn't download Aperture 3.5.1 because I was still running OSX 10.8.x. So I read current reviews for OSX 10.9.x, and ...
3. Downloaded and installed the current operating system (about a 3-hours process for me). OSX 10.9.2, here we are!
4. Then I returned to the Apple Store, found, and purchased Aperture 3. [For safety's sake, it would sure be nice to have a .dmg file I could copy and file away. I lost a perfectly legal and good copy of Adobe's Photoshop Elements 3 years ago because I wasn't smart enough to make a safety copy, and when my iMac crashed (fried electronic components), I was left with a copy of the software that wouldn't run, and couldn't be verified as legit.]
5. When Aperture 3 finished installing, I found and imported my COMPLETED Aperture 2 book project, which import seemed to proceed nominally -- the right number of pages, the right content on those pages, that sort of thing -- until I started looking more carefully at the pictures themselves. All of them, about 300 of them, have been imported into an Aperture 3 book project in such a reduced resolution that they are fuzzy at the size the book will be printed. Screen-capture of just one example (at 100% viewer setting):
I don't know what to do at this point to correct the problem, short of going through the entire book project, copy the custom captions (since those go away when you "delete" photo content), delete the photo, re-insert the photo, and paste back the custom caption. Lather, rinse, repeat - ~300 times! An estimated 2-3 hours of additional work.
Or does anyone in this community know either (1) that I did something wrong in the Aperture 2-to-Aperture 3 import (I don't recall being offered any options or choices in the process); or (2) that there is a wholesale one-step solution to my problem?
BTW, I tried to edit my "Product" info, but OSX 10.9.x is not in the pick list. I am running OSX 10.9.2
<Re-Titled By Host>

Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix?

Spool list recipient has been missing

In one of our defined background Job in Sm37, the spool list recipient has been missing and we have no ideas what has gone wrong, Is there a way to check or rather to check who and what has been changed to a Job defined in Sm37?

HI Jack,
we can check the JOB in SM37 and find out if any variants/Program changes have occured which triggered this change. In Job details, the prog name and the Job logs provide the varinat for which it has been scheduled. A program change is traceable by Version history and a Variant change can be traced by its owner...
Hopefully it helps.
Br,
Sri
Award points for helpful answers

Determine the number of times the document has been printed

Hi all,
I have a form here ( SAPSCRIPT), there is certain field to show how many times the document
has been printed, i use NAST-ANZAL, but it seems to display no correct value.
Am I using the riht field anyway? Or missing something?
Thanks ,,
AUD

Hi,
Check for the field NAST-VSTAT.
IF NAST-VSTAT = '1' meaning that document is printed.
Refer below example from NAST entries. 4000010000 document is printed 4 times.
OBJKY                          KSCHL SPRAS PARNR      PARVW USNAM        VSTAT
4000010000                     ZSGI E                      XXXXXXX                             1
4000010000                     ZSGI E                      XXXXXXX                             1
4000010000                     ZSGI E                      XXXXXXX                              1
4000010000                     ZSGI E                      XXXXXXX                             1
Rgds,
Arun

Since the last update of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you check why it taking so long since the update on firefox.

since the last update a few days ago of firefox, the time has been 25 to 35 seconds to enter bookmarks or even the time it takes to page down when it used to take a few seconds. can you tell me why it taking so long since the update on firefox. may another update is in order.

I have now done pretty much every suggestion that even vaguely applies in the various helpful link provided. Thanks for the ongoing help. =)
I have managed to get FireFox's start-up memory usage down to about 100,000K, however it appears that memory usage keeps creeping up the longer FireFox is open. (It seems to top out around 500,000K.) And I'm not talking open for many hours or days - but rather for minutes and possibly up to a couple hours. (Based on how long I've been fiddling with all this so far.)
On the plus side, it does not appear GreaseMonkey is the culprit since with it active or disabled this memory creep still occurs. Although having GreaseMonkey enabled definitely increases the rate of memory creep. Though once it has creeped up to 150,000+K, disabling GM does not make it drop back down to the starting 100,000K.
I should point out I run a MacBook Pro and use Bootcamp to partition the hard drive and run it as a Windows 7 PC about half the time. I am running it literally as a PC or, alternately, as a Mac depending on which hard drive I choose to load. (I'm not "windowing" it.) This problem exists regardless of whether I am using the PC or the Mac. These repairs have been made currently on the PC side, and I will attempt them all again on the Mac side. I find it odd that this enormous memory drain has occurred on 3 different computers at the same time. (The two "halves" of my home laptop as well as the PC at my work place.)

The docfile has been corrupted : Windows 7 + CS 4 FLA

There seems to be an issue w/ Windows 7 + CS4 FLA files where
some don't open with the error "The docfile has been corrupted".
The same FLA opens fine in Vista or OSX on the same machine &
other machines. Any ideas on how to fix or work around this would
be greatly appreciated!

I've received these errors as well, and yes, of course Adobe
won't offer solutions to the problem yet since Windows 7 is in
BETA. Here's a simple explanation of a beta release:
"The beta version of a software release is considered to be a
preview. It sometimes has all the standard features, but is not yet
ready for wide release or sale. During this point, the company will
collect feedback from users about the product's usability —
what they like and what should be changed — before the
product's wide release."
So, it would be in all of our best interests to send feedback
about this issue directly to Microsoft through their "send
feedback" link that appears on every window in the beta OS. When
the OS releases, that's a whole new story if the error still
occurs.

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

It seems the point has been missed....

Similar Messages

Maybe you are looking for