It should be easier to change the default copyright company in Application Builder

It should be easier to change the default copyright company in Application Builder.
I got the following from NI support to change the name of the company that is copyrighting the software.
1. To show the desired hidden folder, you must select Tools>> Folder Options >> View >> Under 'Files and Folders'>> 'Hidden files and folders' >> check the 'Show hidden files, folders, or drives' >> Select 'ok'
2. Navigate to C:\ProgramData
3. Open ProgramData >> National Instruments >> LVProductDLLInfo >> 12.0.0 >>LabVIEW_ADE_120000.ini ***Please note that the folder 12.0.0 may instead be 14.1.0 or another numeric value based on which version of LabVIEW you are using***
4. Change the RegisteredOrganization and RegisteredOwner to the appropriate organization and owner respectively.
The fix NI support sent me was to change the name of the current software owner.
The company that owns the software is usually writing the program for another company that is paying to have it developed. If the software owner is not careful they may assign the copyright to their company or to the company that they developed software for last. I am sure that the company that had software developed will be surprised if their name is not listed as the legal copyright owner.
Stan

I've found it now (sheepishly). It is a parameter defined in Home->Application Builder->Application 693->Application Attributes->Edit Definition. I thought it was using the database nls parameters, but it isnt. So I simply had to change the parameter value from $ to £.

Similar Messages

How do I change the default copyright notice?

I'm just getting started using the Xcode tools for app development. When I start a new project all the .h and .m files in the classes folder include a default copyright notice that came from somewhere on my computer. In my case it is a reference to my last job, the company name. I'm on my personal home computer not company owned. Can someone tell me how to find where Xcode is finding that text string? So I can modify it.
Thank you
[email protected]

btw; I found the referecnes to :
# Read the default value
defaults read com.apple.Xcode PBXCustomTemplateMacroDefinitions -dict ORGANIZATIONNAME
# Set the default value
defaults write com.apple.Xcode PBXCustomTemplateMacroDefinitions -dict ORGANIZATIONNAME "Your Company Name"
but I can't fine the file that contains the above.... ??

Indirect evaluation, 2 change the default amount against a wagetype in IT8

Hi Experts,
After providing the paysccale str in IT0008 the default wagetype for stipend is coming along with its amount (in change mode ) but when i am chnaging the amount and trying to save it the amount regains that default value. My requirement is I should be able to change the default amount comimg and then save it.
How it is possible.
Regards,
Tomesh

Hi,
Go to table V_T511 for the wagetype. Tick the Rewritable field. This will allow your INVAL to be chnages in IT0008
Regards,
Devojit

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default JAD Icon image in JStudio

Dear friends,
I have one dought,how to change the default icon JAD image in jstudio application.Its very important to me.And one find answer please tell .

Dear friends,
I developed one application in jstudio.And need to set an special icon for my application.While i download my application in to mobile. The icon should be displayed in the mobile.To show my application as unique from other applications.But i dont know how to set an icon for my application. If any one find answer please reply as soon as possible.
Thank you

How to change the default color of the selected row

hi all,
I need to know how to change the default color(yellow) of the selected row in a table component.whether i need to change anything in the stylesheet.If so, where should i make the changes in the stylesheet.
thanks and regards,
rpk

The chart colors are being referred to *'palette.cxml'* file in these directories
BI_HOME\web\app\res\s_oracle10\chartsupport
BI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\chartsupport
you can change to your custom colors.
Restart OC4J and PS to make the new ones work..
Regards,
Raghu

How to Change the Default Font in Firefox 4 ?

How to Change the Default Font in Firefox 4 , for this >>
http://store2.up-00.com/Mar11/AJG18655.png << ?

Go to properties first: and set before typing anything in as shown here:
http://screencast.com/t/ZTgzOTM3Y
Then right click bring up this menu while inside active field and click on item with arrrow:
http://screencast.com/t/ZTRjMWRkMzk
Now what ever you typed should reflect the new Font setting.
we may be as you say. But then again other people act like whats on the other side.
We do our best. And if we fall short, well we gave it our best shot.
Okay. In the interests of being completely clear:
I have already tried this. Several times. This procedure will change the default for any of the fields that I place by hand. It does not change the default for any of the fields placed by the Wizard. I was unable to find a solution to the problem in any of the manuals, books, or on-line forums, which is why I posted here as a last resort. This leads to two conclusions:
A. Your advice is incorrect
B. There is a problem with my installation of Acrobat
I will assume that A is not the correct conclusion. I will therefore try a re-install of my software to see if this clears up the problem. There have been other issues with other Adobe software on my machine that a re-installed has fixed nicely. Luckily, I don't have to do this at all often.

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default mail server??? Please help.

I need to change the default mail server to my yahoo account. When I had my PC this was easy but I cannot figgure it out on the MAC. I am in China and I need to inform my insurance company of some information or they are going to cancel a policy. When I go to their site for email contact what pops up is the apple email, which I do not have an account for and ofcourse does not work. Their email address does not show and I cannot find it anywhere so I need to change the default to my yahoo account. On my PC this was easy and when I went to a site that had a contact but no email address, my yahoo account would come up. I hope I am explaining this correctly. I really need to do this fast as the letter I got took some time to get here and I just returned from some field work so I have about 2 or 3 days to get the information to them. Thank you.

John,
This does not demonstrate anything for me, since it brings up a Compose window for Mail, with my preferred account as the From address. This happens whether I access with Safari, or with Firefox.
The point that I am trying to make, is that in OSX, there is no way to have web mail access become the default mail method -- it only works with a true mail client, for POP, IMAP or .mac access on your Desktop.
If you have the type of yahoo account that can be setup for POP access with Mail, then when you click, you can choose your yahoo address as the From address to send from.
Of course you can insert the address in a new message with your Yahoo web mail, but I have understood you to want to have the message start containing the info from one of the pages on the site?
See the discussion at the following link, for setting up a Yahoo account in Mail:
http://discussions.apple.com/thread.jspa?messageID=2760483&#2760483
Ernie

How to change the default logo in Oracle UCM11g?

Hi,
I want to change the default oracle logo into custom logo in Oracle UCM11g.Please tell me how can i change that?Is that i have to create any layouts for that?
Thanks

Kyle's Blog offers sample component. Look at the bottom of the blog or use this link: https://www.samplecode.oracle.com/tracker/tracking/id/CS607/linkid/prpl1003
You'll have to register at Sample Code site to obtain access. With this sample it's easy to start and modify by your needs.
For building custom components recomended start is this book: http://www.amazon.com/Definitive-Stellent-Content-Server-Development/dp/1590596846/ref=sr_1_1?ie=UTF8&s=books&qid=1251332342&sr=8-1
It's considered as Content Server Bible.
There are many good advices and guides within this forum. Search for the "custom component development".
Regards,
Boris

How to change the default view of published iCal's URL

I am publishing an iCal for a nonprofit group and link to the calendar from the group's website. The default URL given (in the send publish email option) leads to the week view of the current week. I would prefer the link to take site visitors to the month view of the calendar. If I go to the month view and copy the URL for it, and use that for the link, I have to change the URL each month, because the URL that comes from the month view will only show the month it was at the time I copied the URL -- it will not change with the new month. Does anyone have any idea of how I can change the URL so that it leads to the month view of whatever the current month is?
I should note that I know how to change the default view in the my browser, but I would rather not have to explain how to do this to all the people viewing the calendar -- just wanting the correct month view to show up when they click the link, without having to change it each month.
I would be so grateful if anyone has some insight on this!
Thanks.

Carlo,
The fact that this question has been left unanswered for over 2 months seems a little negligent on the part of Apple Support.
This Forum is unfortunately not Apple Support. According to Apple:
What is Apple Discussions and how can it help me?  "Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. You'll find a wealth of information about your favorite Apple hardware and software products that will help you get the most out of your purchase. You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.
If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages."
In direct response to your questions, I would say that (as observed by the OP) anyone who subscribes to a published calendar can make a change to their desired view using the "Preferences" icon which is displayed underneath the mini-month calendars.
There is no way that I know of to directly or conveniently change the time-range. There may be workarounds, but I could not find a suitable solution for you.
I would recommend that you provide iCal Feedback, if you are interested in informing Apple of your desires.
;~)

Changing the default Zone AAM in SharePoint

SharePoint Web App Provides 5 different Alternate access mapping Zone.
What is the best practice, is it the good practice to change the Default Zone of Web app in AAM.

Hi Maruti
At its most basic level, AAMs are configuration settings set in SharePoint Central Admin that tells SharePoint how to map a web request to the correct web application so that SharePoint can respond with the correct content as URL of a web request received
by IIS is not the same URL that the end user entered in their web browser
Best Practices
Default and Intranet should always be used, the rest are of course optional, but whatever naming convention you use, be consistent!
Default: always the FQDN in the form of “http://WEBAPP.Company.com” (or “http://WEBAPP.domain.local” – whatever
your FQDN format happens to be )
Intranet: Just the name of the webapp itself in the form of “http://WEBAPP” It is important to use a single
name, without any “.”s in the name, as some windows applications will see “.” in the address and will assume “Internet” zone for the address, which can lead to some interesting authentication issues with Microsoft Office applications.
Internet: Almost always prefixed with "WWW” in the form of “http://www.WEBAPP.Company.com” – this identifies
the access URL as a public facing or externally accessible site.
Custom: I have never used this field for anything more than specialized one-off URL testing and sometimes for SSL
cert verification (which generally should go on the load balancer anyways)
Extranet: Every company will be different, but I like to use the “PARTNERS” prefix, in the form of "http://partners.WEBAPP.Company.com”
Amit Kotha

Changing the default to location of Archiver data

Hi,
Is there any way that we can change the default location of the Archiver data. By default is goes to archives folder, i want it to goto some other folder.
Similarly when u take up the backup of site. i want it also to be stored in some other folder.
is it possible.???

For archiver see My Oracle Support Note
How can I move the archive directory? (Doc ID 449054.1)
Not sure what you mean by a back up. There is no built in Disaster recovery tool for UCM. Standard system back ups (file system and DB) for restore should be used.

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

Changing the default item in SPRO

after navigating to the following path:
SPRO>Financial accounting(NEW)>General Ledger Accounting(new)>Periodic processing>Document-->Define Financial Statement Versions.
Now, right click "Define Financial Statement Versions" and select 'Display Technical Information'.
Now, select 'Maint.Objects' tab and double click any one row in the 'Assigned Objects'.
Here it will show the view details.
Here in the 'Object Attributes' tab the Transport item should have 'Manual transport' as the default item instead of 'Automatic transport'.
How can i change this default to 'Manual transport' ?

Hi ,
I doubt you can change the attributes .
Rgds,
Sandeep

It should be easier to change the default copyright company in Application Builder

Similar Messages

Maybe you are looking for