It sounds like my iPod is in a tunnel, any ideas how to fix this?

My ipod touch sound has suddenly gone wonky. It echoes a bit like the sound is coming through a tunnel. I have no idea with to do, please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up                                                                
- Restore to factory settings/new iOS device.             
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
  Apple Retail Store - Genius Bar

Similar Messages

  • In sounds my email notification is stuck on minuet and although I change the sound it will not budge. does anyone have any idea how to fix this problem

    This is very infuriating as the sound will not be changed. Does this mean I have to do a system reset.

    https://discussions.apple.com/message/23673157#23673157
    Check above discussion link here in the Apple support discussions. Hope it helps!

  • Don't know who else has this issue but my ipad air is doing random things.  Almost like someone else is running it.  Any ideas how to fix this?

    This is driving me crazy.  What can I do?

    You would be much better off with a point-and-shoot camera, especially for an occasion like a wedding. The iPad Air only has a 5MP camera.
    Make sure you're taking pictures in a well-lit area. You should be able to tap on a face/area on the screen to get the camera to focus. Either of those may help.
    ~Lyssa

  • Help no volume button or silent button workin, no text tones or ringtones but strange the ipod is workin any ideas how to fix this plz

    my iphone 4 has just started to play up !! when i go to switch the silent button on nothing **** up on the screen, nor does the volume button do this either.  Also i never hear a text when i get it or hear it ringing, but i can play my ipod no probs.  I have been into settings and sounds to see if it was off but it wasnt and all the tones and things work on there just not when i get a call or text.  I have reset all settings and updated it all and nothing is working !! anybody any ideas how to fix this please

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

    the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

    Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
    - I tested the headphones and speakers on other devices: they work fine.
    - When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
    I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
    What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
    Many thanks indeed!
    NG

  • In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

    In my email all the messages from one person bunch together and I would like to separate them. I have done this before on my iPhone but just recently got an iPad and its doing it on this, so does anyone have any ideas how to fix this issue?

    Settings >> Mail, Contacts. Calendars >> Organise by Thread. Switch to OFF to see every individual email in the Inbox.

  • HT3529 Trying to set up sons iPod iMessage, but when his email address is put in it comes up "unable to verify email because it is already in use"...any ideas how to fix this?

    Trying to set up iMessage on my sons iPod touch....he doesn't want my email address, but when I put his email address in it comes up "unable to verify email because it is already in use"...any ideas how to fix this.

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • The screen on my ipod nano is static white any idea how to fix?

    the screen on my ipod nano is static white any idea how to fix?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I have an ipod classic where the screen lights up but is completely blank so am not able to access any music,playlist or menu etc.Any idea how to fix this

    I have an Ipod Classic and currently the screen lights up but no information appears - just a blank back lit screen.Any ideas how to rectify or is it beyond saving?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • My ipod won't let me send emails and says it is rejected by the server? Any ideas how to fix this? thanks

    My ipod touch won't allow me to send emails and a box appears saying the message was rejected by the server? Any ideas how I can resolve this please?
    Thanks

    Try deletng the account from the iPod and re-entering the settings.
    Also see:
    iOS: Unable to send or receive email
    Did it work before?
    Does it send OK from another device?

  • Every time I play a video on youtube it sounds like another version of that video is playing five seconds later, (and keeps doing so over and over) any idea how to fix this?

    When I load a video on youtube, it plays, and then it sounds like another version of that video plays 5 seconds later, and after 5 seconds more, another version etc- etc.

    iTunes saves out a new copy of the entire library file every time a change is made to the library. This is not new behavior.
    The slowdowns I have seen like this have ususally been caused by:
    A virus
    or
    Some anti-virus software is incorrectly interpreting the rewriting of the file and is causing a problem.
    Either way, you should definitely update your anti-virus software and definitions to the latest, and run a full scan of your system. If that does not help, you may want to recreate your iTunes library.

  • I'm trying to add music to a friends ipod, once I try synching it says an unknown error occurred. Any idea how to fix this?

    My friend wants me to add music to his ipod since he's not very techy. I created a playlist and dragged it to his ipod but at the end a message appears saying it was unable to sync for an unknown reason. Any idea what is wrong or why this is happening?

    Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support
    If iTunes can’t communicate with the update server, you may see one of these messages.
    Error 17
    Error 1639
    Errors 3000-3020
    Error 3194
    Errors 3100-3999
    This device isn't eligible for the requested build

  • No sound on You Tube but sound works on other sites.  Any ideas how to fix this?

    What could cause lack of sound on You Tube but not on other sites?  Computer working ok.  Could it be a plug-in issue?  If so, any idea which plug-in?

    1. System Preferences > Other/ Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
      2. Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Quit Safari.
        Restart computer. Relaunch Safari.

  • Hi have brand new ipod touch and the screen has frozen with the apple icon and a blank recharge bar below it any ideas how to fix this please

    u there

    Have you tried resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Next connect it to your computer and try to restore the iPod via iTunes on your computer.

  • The sound on my iPhone 4S isn't working. When headphones are plugged in you can listen to music an watch videos but when you take the headphones out the option to adjust volume goes away and you can't hear music or videos. Any idea how to fix this?

    Today I tried listening to music on my iPhone 4S, only to find that my volume adjuster had disappeared. And just to clarify, when I say that it disappeared, I mean that when I press the volume buttons on my phone, I see the speaker icon but the gauge bar is gone. I can't hear music or watch videos

    Hi thecrane1137,
    If you are having issues with the sound on your iPhone 4S, you may find the following article helpful:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Brenden

Maybe you are looking for

  • Dynnamic image creation from Swing Component

    Hi, I am trying to make a drag and drop area of an application, which will change the mouse cursor image to the component being dragged (a JPanel with several child Components). I know how to change the mouse cursor to a GIF image, my problem lies in

  • WRE54g fustration

    I have a WRT54g, just outside the range of my computer (running windows 7 home premium). So I decided to buy a WRE54g, and no matter what i did I could not get the setup disc to work. I tried several times wireless, wired and even directly connected

  • Need Help!!! Can't Transfer My Music

    Need Help Can't Transfer My Music... need help on how to transfer my ipod music to my new library. Becausi had a problem and a delete my computer account and open a new one. So i need help on how to transfer my ipot music to my new library...

  • Does anyone else have issues with Adobe Premiere on Mavericks?

    We just purchase a new Mac Pro for our video producer and are having major issues. Scrubbing and viewing video is dicey at best. Audio drop-outs, studdering playback, compression artifacts. Really unusable at this point. Seems like the video hardware

  • Converting from Rocky Mountain Basic to C to control a Vector Network Analyzer

    I am trying to convert an extremely old program written in Rocky Mountain Basic to C (Visual Studio.net) using the GPIB controller, and have run into some problems. While calibrating I cannot get the program to wait for the ibwait command (leading to