It takes 5 to 10 minutes to start the i-tunes program

It takes 5 to 10 minutes for i-tunes to start from my desktop. I have windows XP. I installed the latest version of i-tunes but that did not help. After the i-tunes program starts it runs normally with no speed problems. I have over 4,000 songs loaded into i-tunes. Anyone have any ideas?

http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

Similar Messages

JDeveloper 11.1.1.7 takes over 45 minutes to start

Hi,
I have windows 7 64 bit with 64 bit JDK 1.7. My jDeveloper 11.1.1.7 takes over 45 minutes to start, even the previous versions took similar long time. I have McAfee running on my system and have 8 GB RAM and more than 100 GB HDD on my C drive. I tried playing with the tuning parameters as mentioned in few blogs, but nothing seems to help.
Please help.
Avinash
Edited by: user773889 on 26-Apr-2013 00:58

Indeed, McAfee caches what it has previously scanned. I've had different versions of McAfee where this has been, and hasen't been a problem.
It's pretty easy to tell on Windows if McAfee is the culprit. Open the Task Manager and watch is McAfee active (consuming CPU) during the whole process of opening JDev.
If so you're going to have to work with your IT department to get exemptions for JDev put in place if it is.
CM.

Mac book now takes about 10 minutes to start up and all applications "unexpectedly quit" every time before they've opened. What did I do???

Mac book takes about 10 minutes to start up and all applications "unexpectedly quit" even before they open. What did I do???

are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
repair permissions and defragging (idefrag) may help as well.
btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

FCP takes 15-20 minutes to start, once it's loaded plug-ins

Once plug-ins are loaded and RT bits are done, FCP 7 takes 15-20 minutes to start. I've closed projects, I've deleted preferences, repaired disk permissions but still no joy.
Activity Utility suggests that FCP is looking for a previous files assets.
Had anyone else experienced this?
Many thanks

By default, FCP will try to load the last project that was active.
While 15-20 minutes is a long time to try loading even a missing project and it's media, you might try turning this option off. Click in the menu bar where you see *Final Cut Pro* in bold typeface.
Go to User Preferences.
De-select the option "Open last project on application launch" in the General tab.
Post back with your results.
Message was edited by: Nick Holmes. Apparently, I no longer speak English....

I plugged my ipod touch into my laptop and started to down load an (1) upgrade. But Itunes says that the upgrade will take two hours. I started the down load and it started and stoped and eventualy never complerted the down load. How can I fix this ?

I plugged my Ipod touch into my Dell laptop and went to Itunes. Itunes told me I should down load an upgrade, so I did. Itunes said the down load would take two hours. I started the down load, but after two + hours (&longer) , after several starts and stops the down load never completed.
I recently got a (fake anti virus) virus and it damaged my computer. I got it fixed and reinstalled the software and it appears to be working correctly. Could this be the part of the problem ?
Would it help if I reloaded the Itunes (off an external HD) or downloaded it again from Itunes ?
Thanks

I doubt it. For my updates, it has typically taken me many tries/retries. Like for you, the download would stop. and I would have to restart from the beginning. If you get a network timed out error try disabling the security software on your computer.

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

I had to restart my computer and redownload the I Tunes program, Now none of my music is n my library. How can I get them back?

I had to completely reset my computer and re -download the I tunes program. Now none of the music I had before is in my playlist. Where did it all go? How can I get them back?

You can redownload the stuff you bought from the iTunes Store using the Purchased link on the right side of the homepage.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can also Transfer Purchases from your iPhone, but you'll have re-import the stuff off that wasn't bought through iTunes because of copyright laws (or search Google for another app).

I have it takes almost 20 minutes to start up and I keep on getting the rainbow white MacBook

Have a white MacBook it takes 20 minutes to start up and I keep on getting the rainbow ball

Which OS X is installed on your Mac ?
Troubleshooting advice can depend on that information.

After a reboot of the system firefox 6 take about 5 minutes to start, I thought it was suspposed to be faster

I upgraded to firefox 6 on Monday, and rebooted the system today (friday) when I tried to open firefox 6 it took almost 5 minutes to start up, and then it was completely available for a about another minute or so.
I thought 1 of the key advantages of upgrading was that firefox 6 was suspposed to start up a lot faster.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

After firefox loads, the first web pulled in takes 4-5 minutes, then all the rest of the webs work normally. It doesn't matter what web i pull in first. I have norton360.

After Firefox loads the home page (google), the first web site I click in my bookmarks takes 4-6 minutes to come in. Clicking on screen makes it go half-tone until it loads. From then on, all other bookmarks come in fast. It doesn't matter what bookmark I load first, it always takes major minutes. I am using Norton 360 and have even disabled the security and web checking and it made no difference.

Okay, here's what I found out. Followed the above instructions...no joy. I think this maybe needs to be posted in a general OS forum, as I'm thinking this is more about that vs just being about iPhoto/iTunes. Here's what I tried and learned.
A new account allowed iPhoto to open up immediately. However, iTunes seemed a touch slow...not sure if that is just due to it being a new account. So, I deleted that account and moved on to the preferences instructions above.
I removed all preferences and placed them in a "preferences A" folder on the desktop. Launched iPhoto and got the exact same results. Super slow...took forever to open. Took forever to close. Same with iTunes.
So I placed all of the removed preferences back into the folder and decided to start launching and closing apps to see what's affected, what's not. Here are the findings.
iPhoto - The worst of all. Takes 4 minutes to open.
Mail - Opens fine, closes very slowly...apprx 1 minute
Calculator - This now opens incredibly slowly. Also noticed that the blue light below a launching app in the dock that seems to radiate was not radiating immediately....just sort of sat there. About a minutes passes, then it radiates for a second and calculator opens. Quitting is instant
Garageband - Launching is slooooow, quitting is instant.
Lightroom 3 - quitting is slow....quit results in upper-left menu items flashing once, then beach ball for about 30 seconds.
These apps check out perfectly fine with no problems launching or quitting: iCal, Safari, Firefox, Aperture, Photoshop (CS3), Illustrator (CS3), InDesign (CS3), Acrobat, Suitcase, Image Capture, Disk Utility, Text Edit, Photo booth, Final Cut Pro.
So I'm at a loss. This may be more of an OS issue, but figured I'd post here to follow up on the suggestions given. I think I'll pose a question in the OS forums. I'm thinking this might mean boxing up the iMac and making a trip to the genius bar. It's incredibly frustrating.

Every time I open up Firefox it takes about 5 minutes to start, what may cause this?

I am using Vista

''What might be the cause of Firefox taking 5 minutes to start up?''<br>
*Lots of big extensions
*One really bad extension
*One big home page
*Lots of tabs loading up from last session instead of one home page
You might take some time to check your extensions to those listed in
*"[http://kb.mozillazine.org/Problematic_extensions Problematic extensions]" -- if it doesn't load try [http://webcache.googleusercontent.com/search?q=cache:http%3A//kb.mozillazine.org/Problematic_extensions Google's cached copy]

When I start my iMac up it takes about 20 minutes to start

Hi since a few weeks, whenever I reboot my iMac it takes about 20 minutes before the login screen appears. Is it possible that a program called "daisydisk" has something to do with it?

Hello:
If you have some third-party software (translate daisydisk) installed, remove it. That is the first place to start.
Barry

WebAccess takes over 5 minutes to start servicing

Everytime the GW8 Linux server is reboot, WebAccess would take over 5 minutes to begin its service.
Further examining the logs found this on /var/log/apache/error_log when the server starts running after a reboot:
[Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP: attempt
to connect to 127.0.0.1:8009 (localhost) failed
[Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling worker for
(localhost)
[Wed Jul 23 09:56:32 2014] [error] proxy: AJP: failed to make connection to back
end: localhost
[Wed Jul 23 09:56:33 2014] [error] proxy: AJP: disabled connection for (localhos
t)
The above pattern keeps repeating everytime a connection comes... and automagically disappears after a while... WebAccess then starts running...
Any clues???

In article <[email protected]>, Glio wrote:
> Everytime the GW8 Linux server is reboot, WebAccess would take over 5
> minutes to begin its service.
> /var/log/apache/error_log ... after a reboot:
> [Wed Jul 23 09:56:32 2014] [error] (111)Connection refused: proxy: AJP:
> attempt to connect to 127.0.0.1:8009 (localhost) failed
> [Wed Jul 23 09:56:32 2014] [error] ap_proxy_connect_backend disabling
> worker for (localhost)
This is an apache issue where part of it is looking for its proxy engine.
What distro/version of distro are you running? Is this an OES box?
Is anything else using that port? (Possible conflict)
netstat --listen | grep 8009
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

IMac 27" late 2012 hard to sleep : start using on August it is easy to sleep but just few days ago ,it take half a minute to start sleep .

iMac 27" late 2012 hard to sleep :
- I start use this brand new iMac from August 2013 ,it is easy and quickly to sleep . Just few day ago it takes half a minute to sleep .
At same time the old iMac 20" 2007 got same problem .
Please help me to know what happen.
Thanks to our Apple Support Communities,
Garmin 108

Same problem here - only with a 2012 Macbook Air running 10.8.2
(very accurately described above )
After MBA sleeps and you try to wake it up, screen does not refresh properly and only refreshes where the current mouse cursor is.
If you close the lid, and then re-open the MBA then functions correctly.
I also have an issue where the MBA will suddenly crash while asleep and then will require a hard reset.
Not sure if related though.
I just reset smc/pram - will report back if this does not solve the issue.
If you don't hear from me again, then reseting solved it!

Strange: suddenly logic takes about ten minutes to start!

hi!
some hours ago I worked on a logic film underscore project. so i had a quicktime movie loaded in my project.
then I opened the final cut project from which the movie was from. I don't remember if I closed the logic project before, but the actual movie file was just a bounce, not used by both of the apps.
when I tried to open the logic project later it seemed to stop doing anything just after closing the startup screen, so I thought there was a problem with final cut causing logic to crash.
As final cut always takes "hours" to check the waves plugins on every booting, I always swich between special logic- and fcp- sets in "AudioUnit Manager", a tool to have different configs of AUs for different apps or so. Never had any problem for years with that.
So I tried everything with the AU plugins. nothing.
Then I renewed logic's prefs and all that stuff. nothing. then I installed the new pro application support. HEEY! it worked again. but just for a while.
opening other (even small) projects still takes about ten minutes now. nice coffee pause..:-) but I can't drink that much coffee at night.
what can it be? a problem with the project manager?
any suggestion?
cheers
david
PPC Dual G5, 2,5 GHz Mac OS X (10.4.8) 2,5 GB RAM FW410

are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
repair permissions and defragging (idefrag) may help as well.
btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

It takes 5 to 10 minutes to start the i-tunes program

Similar Messages

Maybe you are looking for