It takes forever to back up on windows 7 64-bit

i have a new windows 7 home computer 64-bit and i found out that on the task manager that a * 32 means its using 32-bit files to back up on a 64-bit computer. please i need help on to update to 64-bit files for applemobliebackup files listed in task manager.

Check the app's you have installed i think it was Facebook and a couple of others if you search through the threads you will find them. They make backup times huge unless you have the update and as far as i'm aware sometimes even the update didn't fix the problem. Otherwise was there anything that changed in between your last backup and the one that was taking ages? Try a restore and see if that helps as well.

Similar Messages

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • Safari takes forever to open a new window

    Since updating to the newest version of Safari, whenever I try to open a new window, it takes about 40 seconds to do this, every time. Clicking on a link in an already open page opens much quicker, so how can this be happening since a new window doesn't have content or tries to connect to anything?
    Thanks

    a new window doesn't have content or tries to connect to anything
    That depends on your setting in Safari menu > Preferences > General tab. The second pop-up menu is "New windows open with". If that's set to Empty Page or Bookmarks, it should open a new window instantly. If it's set to something else, then speed is dependent on how quickly that page loads.
    Hope this helps...

  • QuickTime Pro 7.0 takes forever to convert video from Windows Media to Ipod

    Hi,
    I just got a new IPOD Video 60GB and to tell you the truth, i'm not one bit impressed with this product; to give you my honest opinion, i'm disappointed in the purchase and would not recommend this to anyone unless someone can provide me with a solution to the problem.
    Simply put, i'm trying to get some video clips on my new IPOD and i can't. I tunes won't let me for some reason, i do not know. I can get music fine, have not tried photos's as yet.
    Anyway, the problem is, whenever I try to convert using Quick Time Pro 7.0 from WMV (Windows Media Format) to IPOD format (MPEG4), it takes extremly long. I mean seriously outragesly long. To give you an idea, I started a conversion of a 68MB file at 5:25PM, it is now 6:24PM and it's only completed about 45% of the file.
    Is Apple insane??? who is going to wait 2-4 hrs to convert 1 simple video clip? I need to find an alternative solution otherwise i'm going to complain to Apple, and if i don't get my resolution to this problem fast, I will complain to the Better Business Bureau in Canada about this. This is such a scam. Why do i have to buy Quick Time Pro 7.0 just so i can upload video? I should be able to do this through windows directly.
    Anyone that can help please let me know.
    If i don't find something by the end of the year, you can be sure that Apple will be hearing from me in one form or another about this purchase. I spent over $600 on the company on a product that should be simpler to use than this.

    QuickTime Pro does not play .wmv files. It doesn't export them without some other third party software.
    Try reading the steps and supported file formats before your complain about what it does, or doesn't, do.
    http://www.apple.com/quicktime/pro/specs.html
    http://www.apple.com/quicktime/tutorials/creatingvideo.html
    http://www.apple.com/quicktime/pro/faq.html

  • Trying to move files to trash takes forever, and finder windows take forever to load files/apps

    after recently installing Mackeeper (yes, I know..) and attempting to uninstall, my macbook pro 13" al. is taking forever to move a file to the trash, and it equally takes forever to open a finder window. running 10.6.8.

    MacKeeper is an exception to the rule that system modifications should be uninstalled according to the developer's instructions. Although not generally recognized as such, MacKeeper is in fact a trojan, because the developer distributes an uninstaller that purports to delete it, but leaves behind something that causes popup ads to appear in the user’s web browser. Try following the instructions here:
    how to uninstall MacKeeper « Phil Stokes
    I can't personally vouch for the accuracy of those instructions, but others seem to have had success with them.

  • Searching for clips in project window takes forever...spinning ball

    Not sure what could be causing this but searching for any clips in Premiere Pro CC project window takes forever.
    I'm editing on a 2013 iMac i7 maxed out with full RAM (32GB) and my project along with all clips is on an external 4TB thunderbolt drive with over 1TB of free space.
    Searching for a single clip, will often take minutes when typing the clip's name in the project window. It should pop up within seconds but it takes literally can take up to 5 minutes as the mac spinning beach ball keeps flashing. Is this normal? Hopefully the latest update will make the project window searches much faster.
    I just can't understand it as I had a project of similar size in FCP7 where I could call up clips within a split second just by typing the name.

    HI and Welcome to Apple Discussions...
    Go to ~/Library/Preferences and move the com.apple.finder.plist file to the Trash and restart your Mac.
    The tilde "~" character represents your home folder.
    Since the problem happens in more then account I'm not sure if trashing the .plist file will help but won't hurt to try.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    anyone have any idea why it would take forever for the Finder selection window to pop up?
    Try repairing disk permissions...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac.*
    Carolyn

  • Attaching files from Safari and FF- Finder window takes forever to pop up

    Hi everyone,
    I'm having a strange problem with my Finder. When I am in Safari or FF (Using 10.6.3) and I click the button to select a file to upload on any website, it take the finder window about 20-30 seconds to pop up. This happens every time I want to navigate to select a file. I get the spinning beach ball and the Finder window finally pops up generally 20 seconds later. I checked this in another user account on my machine and it has the same problem. I don't think it's a Safari or FF problem, as it's doing it in both browsers---anyone have any idea why it would take forever for the Finder selection window to pop up?

    HI and Welcome to Apple Discussions...
    Go to ~/Library/Preferences and move the com.apple.finder.plist file to the Trash and restart your Mac.
    The tilde "~" character represents your home folder.
    Since the problem happens in more then account I'm not sure if trashing the .plist file will help but won't hurt to try.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    anyone have any idea why it would take forever for the Finder selection window to pop up?
    Try repairing disk permissions...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac.*
    Carolyn

  • K7N2 Delta ILSR Takes forever to boot.

    Specs:
    K7N2 Delta ILSR Mobo
    Athlon xp 2500
    Kingston Hyper X 2700 DDR 512mb (its on the list)
    Geforce 2MX 32mb AGP videocard (I dont play games)
    3 Com 56k Win Modem
    IBM GXP120 60 gig ata133 Hard drive
    Pine 12X DVD drive
    LG 24x10x48 CD Burner
    Antec 300W power supply
    The problem is that it takes forever to install and boot windows with faster processors for some reason. I origianlly built this system with my old Athlon 1.33 and it had these problems.  I then tried a 900mhz athlon and it worked great, so I figured I damaged my 1.33 somehow.  I ordered a 2500+ and a zalmann cpu cooler and now am back to where I was, when the system starts it  seems very unstable and the screen goes blank for 10 minutes while its booting.  It shows about 3 seconds of the starting windows screen then the screen will go blank for a while anf there will be no hard drive activity then it will come back about 10 minutes later and then boot.  Sometimes the system will work fine then sometimes I cant even open my computer i just get the searching flashlight icon where my drives should be.  I have updated to the lastet BIOS.  Also while installing windows I get ocasional long pauses where it is doing nothing at all then it will just magically conitnue and do it in a fashion I would expect a machine of this speed to do.  

    Hmm not sure about the cable position on the CD drives, ill have to check that when I get home.  All the jumpers are set correcly, and the hard drive is all by itself and its on the right connector.  Thanks for the ideas, this problem is really killing me, I havent had these kind of hardware problems in years.  The thing I dont get is why it works good with the 900mhz and not with the 1.33 or 2500+

  • IPhone 3.0 download takes forever

    I've been trying to download the new 3.0 upgrade for my IPhone but it takes forever to back up my files. The process is extremely slow and I get half way through it and then get a message stating that my phone disconnected. Can someone help me with this?

    You are free to work with any released SDK.
    Beta/unreleased SDKs are for review and use by committed developers so that Apple can control their exposure as they are prepared for the general public.
    Paying the fee to register as a developer brings additional benefits, one of which is access to pre-release software. A recent pre-release of iTunes was part of this program as well, again, providing a controlled environment that brings not only a first-look, but associated risks common to pre-release products. It isn't hard to imagine a free-for-all scenario leading to issues that would sidetrack an otherwise organized process.
    if i plan to sell it i pay them an additional 30% of my income!?
    You are also of course free to establish your own mobile platform, OS, app store, sales, marketing, development, support and distribution network where you can keep 100% as you like...after expenses, of course, whatever those may be

  • Oracle Discoverer Administrator not installed with FMW 11.1.1.6 on windows 7 64 bit machine

    Hi,
    Recently I install the Oracle FMW 11.1.1.6 with Oracle Forms, Reports and Discoverer , 11g database and RCU successfully on windows7 64bit machine. I can able to access the Forms, Reports, Discoverer Plus and viewer thorugh URl successfully.
    But I'm not able to see the Oracle Discoverer Adminstrator to create the EUL for creating the connection though the Oracle Discoverer Plus it's give me the error "You do not have access to any End User Layer tables".
    I have also run the Repository Creation Utility against 11g R2 database which created a DEV_DISCOVERER schema.
    I don't how to create the End User Layer tables.
    These are the two URl I found after the installation for the discoverer:
       Discoverer Viewer URL: http://localhost:8888/discoverer/viewer
       Discoverer Plus URL    : http://localhost:8888/discoverer/plus
    Thanks in Advance

    Toufic Wakim wrote:
    Did you mean to say 11.1.1.2 and not 11.1.2?
    11.1.2 works fine on Windows 7 (64 bit).
    11.1.1.2 does not support windows 7 (64 bit). 11.1.1.3.01 was released a fews weeks back that supports windows 7 (64 bit).Hi Toufic,
    Yup, i mean hyperion 11.1.2..
    Now, the smartview has been successfully installed in my system. First, i tried to uninstall the my smartview and delete all registry that point to my smartview. and then i tried to re-install the smartview version 11.1.2, and now, it's work.
    Thanks Toufic..
    Regards,
    VieN

  • I have windows 7, perfect connection to the internet, but it takes forever for firefox to load pages, sits and thinks for minutes before loading. what can i do?

    i have windows 7, the internet connection is perfect, i use other computers with no problem loading pages. With this pages take forever to load, worse then if i had dialup. I think internet explorer is the same, but i don't use it and it's very out of date. I tried a system restore, it worked for a day then back to the same thing. Pages take minutes to load, any page. some time out. i don't know what to do next, i've cleared history, cache, cleaned the computer up not sure where the problem is or what it is.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Thunderbird freezes and takes forever to open "write window" when I try to send emails

    I'm using Thunderbird 31.4.0 and when I wanna send an email Thunderbird freezes and it takes forever (in this case 20+ seconds) for the "write" window to open and ALLWAYS with the recipient left out.... and oh please don't get me started on how long forever is when I try to reply an email........
    Thanks

    I'm using AVG Internet Security 2015 and I should perhaps also mention that I have a chosen few Thunderbird add-ons (adblock, email security and a few others) installed and that it works "so-so" when I run Thunderbird in "safe mode".
    B.R.

  • My screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    Restore the phone --> http://support.apple.com/kb/HT1808
    If this does not resolve the problem you have a hardware problem.

  • Windows Support software takes forever to download... (iMac 2011)

    hi.. im a newbie on mac OS.. just bought a new imac.. and found out that there's a lot of software for work that i cant use on mac OS ( but i love MAC OS, windows is boring) trying the bootcamp on my imac and it takes forever to download Windows Support Software and it doesn't move... Hope someone can help me... thanks
    just like the image, it stucks there.. ive been trying for days but no luck...

    I appreciate your reply sir...
    the proxy is already unchecked still no luck... is there a manual download for the Windows Support Software?

  • Why does my Windows Live Hotmail take forever to load?

    Over the past month or so, my Firefox browser hasn't been playing very nicely with Windows Live Hotmail. For one, it takes forever to load the page, and I stare at a white screen for a good 3 minutes before it finally loads. HughesNet is my Internet Service Provider, and it shouldn't take that much time for my Hotmail to load. I could see it if it were a DialUp connection being this slow! The other thing I want to mention is that for some reason, my SilverLight plugin keeps crashing! All of my 3rd party plugins are fully up to date, including my SilverLight. It won't allow me to upload pictures to attach to e-mails! Instead, I get a sad face, telling me that my SilverLight has crashed! What is the problem that is causing this? So you know, I have the latest version 9.0.1, and it is fully up to date. Thank you. Michael Gronemeyer

    Hi,
    Please try a '''Ctrl''' + '''F5''' refresh. This helps to bring in content afresh.
    Please also check if the page loads okay in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] Additionally, you can also try to '''Enable''' Silverlight via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Plugins''' on the left and check if Silverlight still crashes.
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
    [http://kb.mozillazine.org/Testing_plugins Testing Plugins]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Maybe you are looking for

  • Error while assigning an application to a user

    Hi All, I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ER

  • How can I create stored procedure?

    I am new in this field, I was reading in this web site on how to create stored procedure,and this is what I did : SQL> CREATE PROCEDURE test.proc1 (n IN NUMBER) 2 AS BEGIN 3 select * from districts 4 where doe = n; 5 END; 6 Please direct me. I don't

  • Editing a Wait Step in Campaign Canvas

    I have a wait step in Campaign Canvas to wait until a specific date - 5/5/15 at 7am because the email is supposed to go out at that time. If I want to change the send date, can I deactivate the program and then change that wait step to wait until 5/7

  • HTTP-Tunneling through Apache Plug-in

    Hello, has anybody experience with HTTP-Tunneling of requests to a WLS 4.5.1SP13 through an Apache-Webserver? I'm not able to configure the apache plug-in from weblogic to act as a reverse proxy for requests coming from a Java Client Application. Any

  • Cannot quit safari!

    Whenever I try to shut down, restart, log out, etc., Safari will not let me.  The reason is that the "quit Safari" option is gray.  Why is it not letting me quit?