It takes huge hard disk memory when i render..plz help

i have rendered a 9 min video it has taken 40 gb of my hard disk...plz can anyone help me i need my video in a pen drive where it is only 8 gb...SOS

What kind of video, and what are your export settings?
Showing your export settings screen might help - http://forums.adobe.com/thread/592070?tstart=30
Also... rendering is what you do to make the timeline play better, exporting is when you create a new file
Glossary of Terms http://forums.adobe.com/message/2276441 to help w/communication

Similar Messages

Formatted Hard Disk Memory

Hi,
I am new to the Mac world, and I just got my iBook with a hard disk memory of 80G. However, when I checked out the formatted memory, 20G has already been used, leaving slightly more than 60G. Is this typical? My last notebook was only 20G (not a mac), and the formatted memory was around 17G. If any one can enlighten me, I would greatly appreciate it!
Thanks!

Welcome to the Apple Discussions!
This amount of available space is not unusual. The "80GB" capacity is a marketing term, the Finder will report an actual formatted capacity of about 74GB. Mac OS X takes up more than 3GB and iDVD and Garage Band each take up more than 2GB of hard drive space. When you add the games and other software that comes with an iBook, 14GB of used space is just about normal. You might want to take a peek at this previous topic:
http://discussions.apple.com/thread.jspa?messageID=1040919
-Doug

About the amount of hard disk memory used during Testdrive installation

Dear all,
I have a question about installing SAP Netweaver Testdrive on Redhat Linux Enterprise 5.3. Currently I have a virtual machine (sun virtualbox) where Windows Vista is host and the guest operating system is RHLE 5.3 (32 bit). For doing several tests I would like to install the Testdrive on this linux system. Yet, the total available virtual hard disk memory is about 15 GB and I have already used more than 6GB.
Is there any way to specify the amount of hard disk memory used by Netweaver once it installs DB2 on the system? Because as it seems to me it takes more than 15 GB just for the database. But I'm not sure whether the whole space is really needed, particularly in my case where the aim of use is just for ABAP development and tests (for self-training).
Thanks in advance,
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Dec 5, 2009 11:23 AM

Hi,
You can refer the specific installation guide for the minimum disk space requirement.
Whatever functionality you use you need minimum space as mentioned in the installation guide.
You can configure slightly more memory than given in the installation guide to be safer.
Cheeers...,
Raghu

Significant hard disk memory lost.

Greetings,
Any idea how come 600MB of my hard disk memory suddenly disappeared? Dose it due to Microsoft Word ,PowerPoint and Excel? Currently i'm doing my assignments with these 3 programs. Also, "Microsoft User Data" keep appearing on my document folder. How can i keep it away from my document folder and straight away dump it to the trash??
Thank you so much.

If you use Entourage the user data file is required. I have no idea what may cause the space usage on the drive. You can use a utility like WhatSize - VersionTracker or MacUpdate to see what large files or folders are on the drive. Be careful about what you choose to delete unless you know the consequences.

Out of memory when i render HD with many layers

I got a message error ( out of memory ) when i render HD full 1920 X 1080 in final cut pro 5 with many layers ( 6 to 9 layers ). I have 5.5 gig of memory and when is crash....1.5gig of memory is free in my activity monitor. If a buy more ram...my problem will be resolve? Please help me if anybody know about this problem.
thank
Yan

I am having the same problem...(out of memory on renders)
I've been watching my activity monitor and cancelling the render before I run out of memory... but I'm not getting much done and I can't do a big render at night.
I've done all the usuall things... no CMYC files. Trash Prefrences... etc..
Two questions:
I am using Magic Bullet filters and they seem to stack up the inactive RAM. (When the incactive ram fills up that's when I get the "out of memeory") You said you saw a post about that a few days ago...Was there an answer besides changing out the filters? or can you point me towards the posting?
I'm also trying to figure out how to dump or clear the inactive RAM once I'm done with a render. I found that if I do a full restart I can clear my RAM and get a bunch of renders done before I fill up the inactive ram again. This is going to be a long project if I have to do that.
thanks
Mark

Hard disk memory disappearing

hi
i have a power book G4 running panther OSX 10.3.9 about 4 years old but the hardrive is only 2 years old.
it's memory filled up recently so i removed 3 gigs worth of memory. i then downloaded a pdf form only for all the free memory to disappear. so i cleaned out more memory about 1.4 gigs worth only for that to disappear as well. is this a virus or a consequence of running the computer with hardly any memory.
any ideas will be greatfully received

Hi Zacster!
What size is the Hard Drive, and how much free space is available?
To find that info, click once on the Hard Drive icon to highlight it.
Press the Command + I keys to Get Info.
What is displayed for:
Capacity: ?
Available: ?
Used: ?
As Thomas Bryant posted, insufficient available space, can cause performance issues, system corruption, and possible loss of data.
Depending on Mac system usage habits, it is a general recommendation, to keep 10% to as much as 20%, of the Total capacity, available at all times.
Review the suggestions, in the documents that I have linked to below.
Authored by Dr Smoke:
Problems From Insufficient RAM And Free Hard Disk Space
Freeing Space On Your Mac OS X Startup Disk
Have you ever run any routine Maintenance procedures, as suggested in the articles linked to below?
Mac OS X 10.3/10.4: System Maintenance, authored by Gulliver
Maintaining Mac OS X, authored by Dr Smoke
Is the Mac shutdown overnight, or does it run 24/7?
If you turn the Mac off nightly, the Background Maintenance Tasks, are never run.
These can also be run, using a Third-Party utility, or manually using Terminal, to run the CRON Commands.
I use MacJanitor, when necessary.
INSTRUCTIONS TO RUN CRON MANUAL COMMANDS
Quit all applications/programs.
Navigate to HD > Applications > Utilities.
Double click on Terminal, to open.
At the prompt, type:
sudo periodic daily
Press Return.
Enter your Admin password when prompted, then press Return.
This will execute the daily script that is sheduled to run every night.
When completed, repeat this procedure, but change the command to:
sudo periodic weekly
This one rebuilds a database or two, and usually takes somewhat longer to complete. It is scheduled to run once a week.
Repeat again, with command:
sudo periodic monthly
Or they can all be run in one pass, which is preferable, with this command:
sudo periodic daily weekly monthly
When the tasks complete, and return to the prompt, you may quit Terminal.
Restart the Mac, and run Repair Permissions.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP, until the only messages reported, are listed here Spurious Permissions Errors Using: 10.3.x, authored by Michael Conniff.
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

Hard Disk Memory - where are you?

I have the MacBook Air a few months now. I've had the error message 'Start up Disk Full', so I cleared off old vids etc and got a few clean up tips from YouTube videos. That's ok for now.
I've used Disk Discovery to see what level of memory is taken up in files on the hard disk. From what I can gather 37Gb is taken up by everything - user and system files etc. My system resources say I have 12Gb free and the HD is 64Gb. I can't uncover where the other 15Gb is.
So, my question is two fold - How much of my 64Gb should be taken up by system files (I assumed about 10Gb) and where can I locate the remainder of my memory?
All hints & tips welcome. I want to fill up a 32Gb iPod from my iTunes.
Ta,
Phil.

If you go to the Apple Menu, select "About This Mac", and click "Storage", you'll get a sense of how much everything is taking up on your Mac.
The system is going to take up about 10-15GB of space.
Here are some hints to eek out some more storage.
Download and run Monolingual. It is free and will remove all the languages you are not going to use within the OS. For me, I only speak and use English, so I removed everything but English and saved about 1.5GB of storage space.
I purchased Clean My Mac 2 and recovered almost 5GB of storage by removing junk like log files, etc. that build up within OS X. It also has a nice feature which will show you all the files that haven't been used in a long time and/or take up a lot of space. There are ways to do this manually in Finder, but this program makes it a lot more straightforward.
After installing applications I look in the app folders for crap like sample files, readme files, legal files, etc. - all the crap that gets installed that you're never going to actually use or look at. That isn't a ton of space, but good for a few hundred MB. Every little bit counts in my book.
Always keep about 10% of your storage free. The OS constantly writes/deletes information and the less free space it has to work with the slower it will perform.
Hope this helps!

Mac OS X hard disk memory discrepancies, virtual memory culprit?

Recently my iMac (2.4 ghz intel core 2 duo, 4 GB ram, 320 GB HD running Snow Leopard 10.6.5 ) has started acting really weird. Mainly, the hard drive space has reached almost zero for no apparent reason. I've added up the volumes of the four files on my drive (Applications, Users, Library, and System) and come up with a sum of only 123.94 GB taken up. I've also scanned my drive using OmniDiskSweeper and Disk Inventory X (the two programs recommended to me via colleagues and tech support) and came up with a similar result (give or take a gigabyte). Eventually i checked the Activity monitor, and found to my surprise that a whopping ~135 GB was being used for virtual memory purposes. The virtual memory usage was read right after startup with no background programs running. Currently my drive only has 4 to 5 GB of free space on it, and that's after deleting certain unnecessary programs and files. i've tried rebooting my mac several times, but to no avail, and the trash bin is empty. I don't even have space on my hard disk to burn a DVD through iDVD anymore, and i need that capability for my job. Is virtual memory the culprit behind these problems? What can i do to fix this?

Eventually i checked the Activity monitor, and found to my surprise that a whopping ~135 GB was being used for virtual memory purposes.
This is misleading.
Is virtual memory the culprit behind these problems?
No. The actual problem is most likely excessively large items in /private/var/log/ and/or /Volumes/; the Finder's Go to Folder command can be used to navigate to both. You may also want to check the actual VM swap space in /private/var/vm/, but shouldn't delete anything in there.
(55251)

Hard disks memory is full

Hello all,
Now I work only 2 weeks with the SAP BW. Now it came to a mistake. I just encountered some errors while working with this database. So far there was an error while creating new tables because of an lack of hard disk space. For now it's impossible to extend the hard disk space. Therefore, I'd like to delete the data we don't really need anymore like old log data.
Could please anyone recommend some additional data which I probably could delete?
It would be really helpfull if somewone could describe how to get rid of these data.
New data are not loaded any more in the BW. However, the data is stored in the Bussiness Warehouse and should be readable and usable furthermore.
Thanks a lot in advance.
Björn

Hi,
The first point will be PSA requests.
Its better you delete all the old PSA requests that are correctly updated into targets.
Requests which are generall some days old for eg 15 or 30 or 45.
The second place I can think of is Unused and Low valuation aggregates. There may be aggregates which are not used at all or which are only used very rarely.There may be also aggregates with very low valuation "----
". This is just an overhead on the system and does not improve query performance.
In the above both cases you can delete them as aggregates store redundant data it will save space.
The third place may be unused or obsolete targets if you have any which you dont use any more. For eg consider a scenario where you have split the data in a cube into multiple cubes based on some logical partition like region wise. Once you have loaded all the historical data into the new cubes and they are ready for reporting you can delete the old cube.
A few more places I can think of are very old change logs, Old and unwanted objects, queries, etc. There are scenarios where users are allowed to create temperorary queries for testing purpose which they ignore after the testing. On the long run this may add up. Even though it may not save a huge volume of space you can delete them.
All this should be done after consulting Business.
Then on DB level you can try performing Table space Reorg which will help you reclaim the free space.
Hope this helps.
Thanks,
JituK

Regarding hard disk memory

Can the memory of hard disk reduce? My hard disk capacity is 500 GB . It is showing 400 GB in windows and 20 GB in ubuntu . Is the remaining memory lost?
prudhvi

Hello prudhvi,
Based on the screenshot, the capacity is seemed right.
About the hard drive actually capacity, it is recommended to contact the manufacturer.
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

X230 Hard disks issue when deploying in corporate environment

We got a batch of X230 laptops recently and i've cam across an odd problem. Wuhile deploying win7 I hit some problems with the disks. We wont be using the SSD disk that comes preinstalled so w will install Win7 on the large disk. Heres my problem. some laptops have differing hard disks. when diskpart is run on one the SSD is shown as Disk 0., when its run on the other with differetn disks its shown as disk 1
Laptop 1
Seagate - 298GB disk (ST320LT007)
SanDisk SSD - 22GB -
Run Diskpart
Disk 0 : 22GB
Disk 1 : 298GB
Laptop 2
HGST - 298GB (HST725032A7E630)
Samusng SSD - 22GB (MZMPA024HMCD)
Run Diskpart
Disk 0 : 298GB
Disk 1 : 22GB
Obviously this will be a problem when running a deploy job. It will require 2 build jobs and the tech will have to enter the BIOS to see what hard disk is installed. Any idea why this is like this. Am I able to change this in the BIOS!

Guys,
Several months on now has anyone found an answer to this?
I have exactly the same issue where I want to be able to choose which classification each disk goes to.
I understand that by design you want to abstract the paths and LUNs etc from the users, even the admins, but you need to be able to say "this disk is Gold, this disk is Bronze".
Ideally you would be able to change the classification while the machine is running and have that change trigger a storage migration. VMM could then choose the best path for that classification and migrate that disk while leaving the rest of the VM where
it is.
I understand you can perform a storage migration after deployment and in 2012 R2 you can specify different paths per disk but I really don't want myself or my other admins worrying about paths, just classifications. Within storage migration you cant just
specify a classification and this approach seems to go against the very design.
Basically I don't think Microsoft has thought this one through very well.
Any new suggestions would be greatly appreciated.
Thanks,
Michael

No Hard Disks found when installing

Hi,
Because I have a new PC that has a motherboard that has a kind of RAID controller onboard that is not (yet) certified by Sun, I've been trying to install Solaris 8 on a somewhat older PC. It's a P133 with 96 MB RAM and a 2.5 GB HD (IDE).
Altough the Configuration Assistant finds my HD and CD ROM (and there are no conflicting devices), when the Web Start Solaris Installer looks for a hard disk, he reports: "No hard disks found on the system. Please see your documentation."
I've been trying to change parameters in the BIOS of my PC: set hard disk mode from LBA to CHS or Auto, but I keep getting the same result. What is also funny is that I can issue the 'format' command after the installer stopped. There I can use 'fdisk' and I can create x86boot and Solaris partitons as I like. (I cannot format them though.)
What 's going wrong?
Best regards,
Dominiek

Did you try: destroying the "x86, Solaris" pair, re-booting, running installer, recreating "x86, Solaris" and re-starting the installer with "/usr/sbin/c0d0_isntall"? I have to do that EVERY time...
HOWEVER !!
Your drive might have a drive manufacturer LBA scheme installed - which may not be compatible with your BIOS LBA scheme (docs can be found on www.westerndigital.com). Frequent disk errros is one symptom.
You should have the install disk for your particular hard-drive. It will indicate whether a drive-manufacturer LBA is installed. You BIOS setting is of course a separate issue.
1) If you have an existing partition: * do not alter the LBA scheme *
2) In general, partitions with an Operatitng system installed when LBA was enable must have the exact same LBA (by BIOS manufacturer, BIOS version, or hard-disk manufacturer) SUPPLIED AT EVERY BOOT. Some OS's ignore the BIOS's LBA offering.
3) The LBA-written data is NON-REVERSIBLE. LBA written data is, in general, PER-PARTITION. You must do a complete backup, format, and restore to change you LBA scheme.
4) If you don't know your complete LBA status - you should be concerned. In general, move away from LBA when the opportunity arises.
You might contact your motherboard manufacturer upon the matter of obtaining a BIOS upgrade. Also: what brand HD do you have?
Hope that help,
john

Hard disk rename (When bootcamp setup)

Hi!
I have installed Bootcamp on my macbook pro running yosemite. So I have two partitions: Yosemite and BOOTCAMP. But the Hard disk has taken the name of the old OS (Mavericks). How do I change this back to the physical drive name, or anything else?
See screenshot.
Any ideas?
Thanks!
Geraint.
Message was edited by: Geraintj (Wrong descriptor of OS at bottom of post)

This is only a cosmetic issue and has no impact on any of your systems. I suggest to simply ignore this and do not worry about it as unsuccesful attempt to make a change can cause you a data loss.
However, if you are looking for some steps to change the name to something different, then to change the name of Logical Volume Group you will need to boot your mac to Recovery Mode, open Terminal and use a terminal command - diskutil:
diskutil cs rename Mavericks NewName
Before you do any attempt of renaming, i would suggest to make sure you have a solid backup of both of your Systems. For OS X you can use Time Machine Backup. I do not use Windows, so i do not know what software you could use to backup Windows.
OS X: About OS X Recovery - Apple Support
Mac Basics: Time Machine backs up your Mac - Apple Support

HT201412 Have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (too many apps) - any help greatly appreciated

I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

How to Export pictures from iPhoto to external hard disk? Newbie here! Please help!

Need your help guys. Just bought a new Macbook Pro. Loved using the iPhoto but after managing a lot of my photos, realised that I cannot export an edited photo from iphoto to my external hard disk. I am not sure what iphoto version I am running right now but my Mac is brand new and comes with the pre installed softwares. Whenever I try to export an event, folder or even a picture, I will get this message unable to create/Volumes/FreeAgentDrive/ after going thru the Export process in iphoto. Please help!!!

Your Mac can "read" data from an NTFS drive, but can't "write" files to it.
If you intend to use this drive only on Mac computers, then, use Disk Utility to erase it and format for Mac OS Extended (Journaled).
If you want to be able to write files to the external drive AND still use it with Microsoft Windows computers, then, format it as MS DOS. (Or, on a Microsoft Windows computer, format the drive as Fat32. However, if you use Windows XP, be aware that the largest size you can do this with is 32Gb. Vista and Windows 7 doesn't have this limit.)
Another option, do you have to use an external hard drive? What about a flash drive?

It takes huge hard disk memory when i render..plz help

Similar Messages

Maybe you are looking for