It takes six minutes for my computer using this new Yosemite to boot up

It takes six minutes for my computer using this new Yosemite to boot up and become fully usable.  why?
Model Name: MacBook Pro
  Model Identifier: MacBookPro9,1
  Processor Name: Intel Core i7
  Processor Speed: 2.3 GHz
  Number of Processors: 1
  Total Number of Cores: 4
  L2 Cache (per Core): 256 KB
  L3 Cache: 6 MB
  Memory: 4 GB
  Boot ROM Version: MBP91.00D3.B08
  SMC Version (system): 2.1f175
  Serial Number (system): C0*******V33
  Hardware UUID: ****
  Sudden Motion Sensor:
  State: Enabled
<Re-Titled By Host>

Hi ..
Remove all items from System Preferences > Users & Groups > Login Items then restart to see if that makes a differrence.
If not, go to /Library/StartupItems. Remove any items in the StartupItems folder then restart your Mac.
Make sure there's sufficient storage space.
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
If installed, anti virus software can slow the system down.

Similar Messages

  • In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

    In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

    Many thanks for the diagnostics.
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver.  This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • Why do my text messages on my 4s take 10 minutes for friends to get them?

    why do my text messages on my 4s take 10 minutes for some friends to get them?

    If you are referring to actual SMS messages and not iMessages, then you would need to take that up with your carrier. SMS is a carrier function, which uses the cellular network and they maintain it. You would need to troubleshoot with them.

  • My iphoto library was opened remotely on a computer using a newer operating system. Now it won't open on mine!

    My iphoto library was opened remotely via sharing on a computer using a newer (10.7) operating system. Now it won't open on mine (10.6). It says it needs a newwer version of iphoto, and I want this computer to stay at 10.6 for compatability with other programs. How can I access my photos?

    When the library was opened you were warned this would happen.
    You can restore your Library from your back up.
    You can try revert the Library to the earlier version using iPhoto Library Manager
    Or you upgrade to the same version.

  • Software Update doesn't have any new software for your computer at this time

    HI
    I manged to get all my updates downlaoded and on my server, i have currently enabled 133 of 400 updates.
    I have changed my snow leopard machine to point to the internal update server
    But then after a while of checking this displays software Update doesn't have any new software for your computer at this time
    Which is a Lie, because i know there are updates on the server that the computer needs to have.
    Any Ideas
    Many Thanks

    Oh i forgot to say in consol (from the client) i get can't instantiate distribution from server address  error Domain=NSXMLParserErrorDomain code=70 etc
    Any ideas anyone?

  • HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE.  HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

    I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE.  HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

    There are a number of resources.  You might want to start with:
    The User Manual:
    http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
    This Thread:
    https://discussions.apple.com/message/22833760#22833760
    or just do a google search, that should bring up plenty of tutorials from around the web.
    Cheers!

  • HT201342 I still have the question, "When would I use this new iCloud e-mail account?"

    What do I do with this new iCloud e-mail address?  What is it for?  How does it benefit me?  When would I choose to use this new iCloud e-mail address? 

    Whenever you want to use it, or not, it's your choice.

  • I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

    Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
    I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

  • Designer takes several minutes for login using LDAP authentication

    We have a issue, when we tried to login to the designer using LDAP authentication it takes several minutes and using enterprise account we are able to login to the designer with in seconds.
    CMC and infoview all are working fine using LDAP authentication.
    We are using BOXIR2,
    FP 1.6.
    Thank You in Advance.
    Thanks & Regards,
    Collin.

    There have been several changes in LDAP since FP 1.6 but if infoview is ok then hopefully you aren't running into any of them. When logging into client tools the LDAP requests are sent to the LDAP server directly from the client. An issue like this would suggest there is a problem reaching the LDAP server from the client.
    Is LDAP SSL being used? If yes try disabling it, if no then you can packet scan the logon attempt on the client and filter the LDAP traffic to see how long it's taking for that communication.
    Regards,
    Tim

  • Master is very Slow, Because Slave Takes 20 minutes for "startup done"

    I have two db env to be backup for each other. I stopped one db env for 5 minutes, then restarted it. I found that it took over 20 minutes to receive the db callback event "startup done". During these time, there were transactions in the master db env. I guess this makes the sync_up process take so long time.
    I used the ack policy "DB_REPMGR_ACKS_ONE_PEER" and used "txn no sync" flag for transaction, so during these 25 minutes, master is very slow.
    My requirement is master can resume its performance as soon as slave comes back. Can slave accept the log before its sync completed? Or any other way to solve this issue?

    Most likely what happened is that the stopped dbenv is the only site/peer able to
    send the acknowledgement. If it is stopped but not disconnected, then the master
    will wait the full ACK timeout for every txn.
    It is also likely that during that 5 minutes, log files were archived and when the
    stopped dbenv became active again, it had to perform an internal initialization
    from scratch. That copies over every page of every database and then the logs
    needed to resynchronize. If you have a lot and/or very large database files,
    that can take a long time.
    The client cannot send any acks until it completes its synchronization. One
    way to avoid this would be to perform a manual hot backup to the client before
    starting up the application. You would have to copy over all database files, then
    all log files from the master (in that order) and then run catastrophic recovery
    in that client directory. Then start up your application and the client should be
    able to quickly synchronize.
    You can control this in the application by setting DB_REP_CONF_NOAUTOINIT
    to DB_ENV->rep_set_config. You'll get back an error that tells you that the site
    needs an re-initialization and you can do that copying then.
    Sue LoVerso
    Oracle

  • Why does my macbook pro retina take 30 seconds for me to use it when i open the lid?

    For some reason it takes my macbook like 30 seconds for me to use it when i open the lid.  I cant move the mouse or anything until like 30 seconds go by is that normal or something wrong?  Its the new macbook retina display and never had this problem when i first got it.

    Are you running any applications when you open the lid, specifically any applications that are heavy on GPU usage such as iMovie or Photoshop?

  • HT1096 I have a analog to DV converter that I have had for years, but I have not used it for awhile am using a newer MAC. How do I get it to import from my converter. It is only showing the built in camera.

    I have a analog to DV converter that I have had for years, but I have not used it for awhile, and I am using a newer MAC. How do I get it to import from my converter. When I go to import in iMovie it is only showing the built in camera. Help...

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I've got a new computer and when i plug in my ipod, the message says this ipod has a different itunes library do you want to delete it and use this new library/ you will loose all content.  I want one itunes account but can't figure out how.

    i've got a new computer and when i plug in my ipod, the message says this ipod is synced with another itunes account.  do you want to erace the contents and set up with this itunes.  i want one account only but don't want to loose my ipod contents.  tried uninstalling itunes and redoing get the same message.

    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • HT5704 how can i use this new software

    hi apple company my name is Ibrahim who have Iphone 4 and i saw attention to uptodate software so i don't have any idea about this software is
    iOS 6.1.3 could you help me how can i use this software

    Take a look at this link, http://support.apple.com/kb/HT5704

  • I am coming across a probelm when using multipel tabs in FireFox6. If I open a new tab it takes several minutes for the address bar to become clickable to type. how do I fix this?.

    recently upgraded to 6.0.2. Could this be the reason? using windows XP. unable to duplicate issue through other browsers so definitely FireFox related.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for

  • How do I install new software updates on my mac?

    my itunes and iphoto keep telling me I need a software update and I try to click on the software update button on the top left screen and it tells me to "install and restart" when I click that it JUST restarts and wont install anything. How do I upda

  • HOW DO I GET A SERIAL NUMBER FOR LOGIC PRO IF LOST MINE ?

    How do i get a serial number for logic pro ?  i purchased it so long ago and i just cleaned off my computer and re-installed mountain lion . When i did an erase and archive i forgot to look to see the serial number . Now when i go to launch it it ask

  • BAPI Call.

    Hi Guys, I have a typical Problem. we are calling an BAPI from VB.this bapi is called by several users. we want to implement SNC login for all the users defined in Sap. the problem is that , the user which logs on to Sap from VB, can be assigned to o

  • Crm technical tables

    Hi, all I need to know what are the most important  technical tables in crm that we generally across? points will be rewarded thanks madhuri

  • I keep getting this error message and Firefox won't start....Exc in ev handl: Error: Error setting property on NPObject!

    Firefox won't start and this message keeps coming up....I uninstalled and reinstalled....but didn't help... Exc in ev handl: Error: Error setting property on NPObject!