It takes time before the system is working properly

Hi,
This morning something strange happened.
Turn on the iMac, the chime is there but when using the audio control keys (F4-F15-F16), nothing happened.
Trying to quit an application (like iMail) from the dock does not work either.
The icon in the dock shows the selected view but the options above the icon are not shown.
For your info: the audio is working when using iTunes.
But after waiting for a few minutes, the system is back to normal: the options above the iMail icon are shown and the audio control window is shown as well.
For some reason, the system needs a few minutes to get back to normal.
It performs the selected actions but they are delayed.
Additional information:
- The permissions are o.k.
- No external DVD writer or hard disk has been connected
- USB connected equipment: EyeTV, cardreader
I have rebooted, restarted the systems a few times and it goes wrong in most of the cases.
Here is the system log for a case where it goes wrong.
Anyone?
Could the problem be caused by the error message at 12:38:32?
Apr 27 12:38:31 iMac-Rob shutdown: reboot by Rob:
+Apr 27 12:38:32 iMac-Rob SystemStarter[210]: authentication service (219) did not complete successfully+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: The following StartupItems failed to properly start:+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: /System/Library/StartupItems/AuthServer+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: - execution of Startup script failed+
Apr 27 12:39:00 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 27 12:39:00 localhost kernel[0]: PAE enabled
Apr 27 12:39:00 localhost kernel[0]: 64 bit mode enabled
Apr 27 12:39:00 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 27 12:39:00 localhost kernel[0]: vmpagebootstrap: 512847 free pages
Apr 27 12:39:00 localhost kernel[0]: migtable_maxdispl = 71
Apr 27 12:39:00 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 27 12:39:00 localhost kernel[0]: 90 prelinked modules
Apr 27 12:39:00 localhost kernel[0]: ACPI CA 20060421
Apr 27 12:39:00 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
Apr 27 12:39:00 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 27 12:39:00 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 27 12:39:00 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 27 12:39:00 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 27 12:39:00 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 27 12:39:00 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Apr 27 12:39:00 localhost kernel[0]: Started CPU 01
Apr 27 12:39:00 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 27 12:39:00 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 27 12:39:00 localhost kernel[0]: Security auditing service present
Apr 27 12:39:00 localhost kernel[0]: BSM auditing present
Apr 27 12:39:00 localhost kernel[0]: disabled
Apr 27 12:39:00 localhost kernel[0]: rooting via boot-uuid from /chosen: 706A03DF-BE50-44AC-82DB-D23B5D479191
Apr 27 12:39:00 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 27 12:39:00 localhost kernel[0]: USB caused wake event (EHCI)
Apr 27 12:39:00 localhost kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0019e3fffe89003a; max speed s400.
Apr 27 12:39:00 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD2500JS-40TGB0 Media/IOGUIDPartitionScheme/Customer@2
Apr 27 12:39:00 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::probe:
Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::start before command
Apr 27 12:39:00 localhost kernel[0]: CSRHIDTransitionDriver::stop
Apr 27 12:39:00 localhost kernel[0]: IOBluetoothHCIController::start Idle Timer Stopped
Apr 27 12:39:00 localhost kernel[0]: Jettisoning kernel linker.
Apr 27 12:39:00 localhost kernel[0]: Resetting IOCatalogue.
Apr 27 12:39:00 localhost kernel[0]: display: family specific matching fails
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 0
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
Apr 27 12:39:00 localhost kernel[0]: Matching service count = 1
Apr 27 12:39:00 localhost kernel[0]: Previous Shutdown Cause: 3
Apr 27 12:39:00 localhost kernel[0]: display: family specific matching fails
Apr 27 12:39:00 localhost kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
Apr 27 12:39:00 localhost kernel[0]: 4.170.46.5IPv6 packet filtering initialized, default to accept, logging disabled
Apr 27 12:39:00 localhost mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[32]: starting
Apr 27 12:39:00 localhost memberd[40]: memberd starting up
Apr 27 12:39:00 localhost DirectoryService[45]: Launched version 2.1 (v353.6)
Apr 27 12:39:00 localhost lookupd[44]: lookupd (version 369.6) starting - Sun Apr 27 12:39:00 2008
Apr 27 12:39:02 localhost kernel[0]: yukonosx: Ethernet address 00:17:f2:da:0f:96
Apr 27 12:39:02 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:1b:63:14:3b:be
Apr 27 12:39:02 localhost launchd: Server 331f in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[44]: exited abnormally: Hangup
Apr 27 12:39:02 localhost kernel[0]: Registering For 802.11 Events
Apr 27 12:39:02 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Apr 27 12:39:02 localhost diskarbitrationd[39]: disk0s2 hfs 9A0A53D7-98B5-3116-8E2B-08011F0C72BF Macintosh HD /
Apr 27 12:39:02 localhost kernel[0]: IOBluetoothBNEPDriver: Ethernet address 00:19:e3:ef:d4:33
Apr 27 12:39:02 localhost lookupd[63]: lookupd (version 369.6) starting - Sun Apr 27 12:39:02 2008
Apr 27 12:39:03 iMac-Rob configd[36]: setting hostname to "iMac-Rob.local"
Apr 27 12:39:03 iMac-Rob configd[36]: bootpsessiontransmit: bpf_write(en2) failed: Operation not permitted (1)
Apr 27 12:39:03 iMac-Rob configd[36]: DHCP en2: INIT transmit failed
Apr 27 12:39:03 iMac-Rob /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 27 12:39:04 iMac-Rob loginwindow[66]: Login Window Started Security Agent
Apr 27 12:39:04 iMac-Rob kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled
Apr 27 12:39:06 iMac-Rob configd[36]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 27 12:39:06 iMac-Rob configd[36]: posting notification com.apple.system.config.network_change
Apr 27 12:39:06 iMac-Rob lookupd[96]: lookupd (version 369.6) starting - Sun Apr 27 12:39:06 2008
Apr 27 12:39:07 iMac-Rob kernel[0]: netsmb_dev: loaded
Apr 27 12:39:08 iMac-Rob mDNSResponder: Adding browse domain local.
Apr 27 12:39:08 iMac-Rob configd[36]: target=enable-network: disabled
Apr 27 12:39:09 iMac-Rob kernel[0]: smbfssmbqfsattr: (fyi) share 'NTFS', attr 0x2b, maxfilename 255
Apr 27 12:39:09 iMac-Rob kernel[0]: smbfs_aclsflunksniff: sm_args.uid 501, error 2

Mac_Robban wrote:
Could the problem be caused by the error message at 12:38:32?
Apr 27 12:38:31 iMac-Rob shutdown: reboot by Rob:
+Apr 27 12:38:32 iMac-Rob SystemStarter[210]: authentication service (219) did not complete successfully+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: The following StartupItems failed to properly start:+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: /System/Library/StartupItems/AuthServer+
+Apr 27 12:38:33 iMac-Rob SystemStarter[210]: - execution of Startup script failed+
It looks like that message comes immediately after you tell it to restart, so it's not related to your problem. I see those same lines in my log, anyway. The actual reboot comes with the next line, at 12:39:00...
As for the slowdown, do you have an external file share turned on that mounts at startup? I see a mention of an SMB mount called "NTFS" in your log. That can slow things down a lot, especially if it's not available.
Also, things are a bit slower right after a reboot. For example, when you launch a program for the first time after a reboot, it takes quite a bit longer. But once it's been launched once, it'll launch much faster after that. Also, lots of things are going on in the background, even once the Finder desktop comes up. If you have a lot of applications listed in "Login Items" in your "Accounts" preferences, those take time (and more important, CPU time) to start up, too.
Also, see if things speed up if you remove the EyeTV and card reader. Maybe they're starting a process that's taking a lot of CPU time...
charlie

Similar Messages

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • Timer works if I set the time before the current one

    Hi,
    I've got a block that is part of an actionListener that has 4 buttons, anyway I want the timer to execute something exactly at the time I set it.....but in the code that I have it also executes if i set the time before the current time
    Here's the segmant:
    private class ButtonResponder implements ActionListener
              public void actionPerformed(ActionEvent event) 
                    if (event.getSource() == exitButton)
                                  System.exit(0);
                   if(event.getSource() == setButton)
                        int hour = Integer.parseInt(hours[hourComboBox.getSelectedIndex()]);
                        int min = Integer.parseInt(minutes[minuteComboBox.getSelectedIndex()]);
                        Calendar calendar = Calendar.getInstance();
                        calendar.set(Calendar.HOUR_OF_DAY, hour);
                        calendar.set(Calendar.MINUTE, min);
                        calendar.set(Calendar.SECOND, 0);
                        Date time = calendar.getTime();
                    timer = new java.util.Timer();
                        timer.schedule(new TimerTask()
                             public void run()
                                  JOptionPane.showMessageDialog(null, "it is time");
                        , time, 5*1000);
                   if (event.getSource() == cancelButton)
                        timer.cancel();
              }So if I put zeros in hours and minutes it will execute immediately....how can I make execute at the exact time (so that if the time now is 2:00 and I set it to 1:00 it only executes the next day??
    Message was edited by:
    Octavian

    Bump the day if the time is less than current time.
    Kaj

  • RMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    rMBP: Sometimes, after having been shut down, i have to press the power button several times before the machine starts up. It's 3 weeks old, and this has happened 2 times now. Is there something wrong with my rMBP?

    Did you purchase the Mac new?
    You have 14 calendar days from the time your items are delivered to initiate a return as noted here.
    Even though you are past the 14 day limit, if it were me, I'd take the Mac back and explain what's going on. Your Mac should work out of the box.
    message edited by:  cs

  • My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

    my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
    my iphone4 is 10 times faster
    i have backed up on itunes and restored but still no luck
    even siri is lagging

  • Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Try a reset:
    - Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
    If issue persists try:
    - Another known working cable
    - Check the charging port for any damage or debris
    - You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

  • E_IO_CANNOT_OPEN error message. Get this 1-2 times before the book downloads to ADE3.0. Why?

    E_IO_CANNOT_OPEN error message. Often get this 1-2 times before the book downloads to ADE3.0. Why?

    Hi,
    So I've fixed the activation error, but when trying to get an ebook from the sample site I'm now getting "LICENSE_SIGN_ERROR." And I'm still getting the license error (CANNOT_OPEN) when trying to download library books, no matter how many times I de/reauthorize ADE, restart the computer and the program, and try to dl the book from the library website.
    Thanks for any additional advice!
    Edit, a few days later - still experiencing the problem, no matter how many times I try to download the library book I get the same error. Any ideas? Thanks @shreya

  • I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

  • Recovery to a time before the last resetlog issue

    Hi experts!
    Env: 11.2.0.2 including a 11.2.0.2 RMAN recovery catalog.
    Having big trouble understanding what is happening here.. I'm trying to return my database to a time before the last resetlogs time, but cannot as RMAN always gives "RMAN-20011: target database incarnation is not current in recovery catalog". And yes, I've reset database to previous incarnation.
    [oracle@targetdb backup]$ rman
    Recovery Manager: Release 11.2.0.2.0 - Production on Wed May 15 22:01:39 2013
    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
    RMAN> connect target
    connected to target database: TRGDB (not mounted)
    RMAN> connect catalog rman/rman@rmancat
    connected to recovery catalog database
    List of Database Incarnations
    DB Key  Inc Key DB Name  DB ID            STATUS  Reset SCN  Reset Time
    1       15      TRGDB    1659522178       PARENT  1          13.08.2012 06:51:46
    1       16      TRGDB    1659522178       ORPHAN  765647     31.10.2012 07:47:00
    1       17      TRGDB    1659522178       PARENT  765821     31.10.2012 07:53:07
    1       18      TRGDB    1659522178       PARENT  815390     05.11.2012 14:41:39
    1       19      TRGDB    1659522178       PARENT  816252     05.11.2012 15:05:16
    1       2       TRGDB    1659522178       PARENT  1825516    24.04.2013 21:33:32
    1       523     TRGDB    1659522178       PARENT  2127837    13.05.2013 13:24:51
    1       521     TRGDB    1659522178       PARENT  2181465    14.05.2013 08:57:42
    1       1154    TRGDB    1659522178       CURRENT 2257381    15.05.2013 21:32:08
    RMAN> reset database to incarnation 521;
    database reset to incarnation 521
    RMAN> restore controlfile from '/home/oracle/backup/c-1659522178-20130515-00';
    Starting restore at 15.05.2013 21:50:54
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=10 device type=DISK
    channel ORA_DISK_1: restoring control file
    channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
    output file name=/home/oracle/oradata/TRGDB/controlfile/o1_mf_82l1ml9w_.ctl
    output file name=/home/oracle/oradata/fast_recovery_area/TRGDB/controlfile/o1_mf_82l1mljs_.ctl
    Finished restore at 15.05.2013 21:50:55
    RMAN> sql "alter database mount";
    sql statement: alter database mount
    released channel: ORA_DISK_1
    RMAN> run
    2> {
    3> set until time "to_date('15-05-2013 20:15:00','dd-mm-yyyy hh24:mi:ss')";
    4> restore database;
    5> recover database;
    6> }
    executing command: SET until clause
    Starting restore at 15.05.2013 21:52:07
    Starting implicit crosscheck backup at 15.05.2013 21:52:07
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=12 device type=DISK
    Crosschecked 12 objects
    Finished implicit crosscheck backup at 15.05.2013 21:52:09
    Starting implicit crosscheck copy at 15.05.2013 21:52:09
    using channel ORA_DISK_1
    Finished implicit crosscheck copy at 15.05.2013 21:52:09
    searching for all files in the recovery area
    cataloging files...
    cataloging done
    List of Cataloged Files
    =======================
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_15_8s7rosfg_.arc
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_16_8s7rosg0_.arc
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_1_8s7rp9st_.arc
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_2_8s7rp9lt_.arc
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_17_8s7rorkn_.arc
    File Name: /home/oracle/oradata/fast_recovery_area/TRGDB/archivelog/2013_05_15/o1_mf_1_14_8s7rory4_.arc
    skipping datafile 8; already restored to file /home/oracle/oradata/TRGDB/datafile/o1_mf_aud_trai_8qlfhw19_.dbf
    restore not done; all files read only, offline, or already restored
    Finished restore at 15.05.2013 21:52:11
    Starting recover at 15.05.2013 21:52:11
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of recover command at 05/15/2013 21:52:11
    RMAN-06004: ORACLE error from recovery catalog database: RMAN-20011: target database incarnation is not current in recovery catalogThe controlfile I restored above ('/home/oracle/backup/c-1659522178-20130515-00') is from before the last resetlogs.
    Also I notice in the alert log during "searching for all files in the recovery area.."
    Wed May 15 21:52:09 2013
    Setting recovery target incarnation to 9
    Setting recovery target incarnation to 9It seems to me that RMAN "ups" the incarnation back to the CURRENT one (the one before I ran reset incarnation command).
    But why?
    I'm obviously doing something wrong here, please shed some expert enlightment.
    Thanks!

    Hello;
    Been awhile, probably time for me to test this again. Here's what I think :
    The database with the DBID (1659522178) and DBINC_KEY (521) has to be reset in the recovery catalog and re-registered for its backups to resume.
    RMAN> reset database to incarnation 521;
    database reset to incarnation 521
    RMAN> register database;In my way old notes I do :
    RMAN> connect target sys/sys
    RMAN> startup nomount
    RMAN> restore controlfile from'....
    RMAN> Alter database mount
    RMAN> reset database to incarnationSo use target database controlfile instead of recovery catalog
    Best Regards
    mseberg
    Edited by: mseberg on May 15, 2013 6:12 PM

  • HT5624 my apple id account has been disabled for security reasons.  I have re-set my password numerous times but the system still will NOT let me sign in.  It continues to say your account has been disabled.

    my apple id account has been disabled for security reasons.  I have re-set my password numerous times but the system still will NOT let me sign in.  It continues to say your account has been disabled.

    CALL
    1-800-MY-APPLE (1-800-692-7753)   let them know and they will helo you enable the account.  even if you change the password 50 times the account will stay disable till you call them
    good luck

  • After I installed 7 on my IPad none of the keyboard functions work properly.  seems like microsft had something to do with this new operating system.  any know what I did wrong

    after I installed 7 on my IPad none of the keyboard functions work properly.  seems like microsft had something to do with this new operating system.  any know what I did wrong

    Thanks for the quick advice!
    Unfortunately, I am still unable to open my core productivity apps, namely Skype and Evernote. Twitter, as well, could not start. But interesting quick fix though, I never knew you could do that.
    Here's the error log after the restart:
    What else should I try?

  • A box appears around the apps i am trying to click on and i cant scroll. I have to click about ten times for the app to work

    A box appears around the apps I am trying to click on and I can't scroll. I have to click many times for the app to work.

    Sounds like you have VoiceOver (one of the accessibility features) 'on' - if you turn the volume up do you get a voice saying what you are tapping ? If you do then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.
    If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    I have a iMac 21.5", with cordless mouse, very often it shows "not-connected" or "connected", at its will, we can't do anything. Changed the battery, no improvement. Now fixed another wired mouse to the system to work. My wire less keyboard working well

    Make the device a favorite.
    Also, I would reset the PRAM and SMC.
    Barry

  • Deleting mail from the server - not working properly

    Hello all,
    I usually remove all spam from the mail server as soon as it comes in to avoid it arriving in all our office mailboxes.
    Since upgrading to Leopard, I've run into some hickups.
    After going to apple-i, I select the spam messages, click on 'delete from server', confirm this in the pop-up window... after which nothing happens. While I should get an updated list of messages on the server, and a new number and size of messages in the bottom left corner.
    I sometimes have to repeat the procedure two or more times before the selected messages are deleted.
    Anyone else having the same problem?
    Lianne

    No-one experiencing the same problem??

  • HT201441 Hi, I purchase an ipad from a private party and the ipad was working properly until one day my daughter screw up the password he set. Now the ipad is locked and I try to restore and reset it over again. But it keep asking for the owner id to do i

    Hi, I purchased an ipad from a private party  a while back. The Ipad was working properly until today my daughter scew up the password and it now locked. I did a restore to the Ipad. But I could not set it up. Cause it kept asking for the previous owner id. And I now don't have the previous owner number. Is there a way that I could set up Without his ID?

    Cancel the sale, return it to the original owner temporarily, and tell him to take the device and its purchase receipt to a physical Apple Store.
    (120467)

Maybe you are looking for

  • Partner Bank Type in Vendor Master

    Good afternoon I have the situation where a Vendor has more than one bank account - eg. one bank account for Euro and one bank account for Sterling In the vendor master I have created the 2 lines on the bank details screen and created Partner bank ty

  • Recording and playing back

    Hi, I have question about recording and playing back. I am going to record by AudioQueue and to play back by MPMoviePlayerController. My code can record by AudioQueue. But, It can not record After playing back by MPMoviePlayerController. Is Anyone wh

  • Extremely large captivate project files

    Hi there, So we recently hit a problem with Captivate, we use both english and arabic for our courses and one of our projects is about 27 slides (including 7 question slides) and the final captivate file size for the arabic course (not published) is

  • Error retrieving BOM type from sales order line matrix

    Hi All I have a problem with an add-on which works in SBO version 2007 but now fails in version 8.8. The fault occurs when the code attempts to retrieve the BOM type from the sales order line matix as follows: objCombo = mtxOrder.Columns.Item("39").C

  • Excise system variables

    Hi, I am using sysvariables 2350 and 2356 for Excise and Edu Cess. Please help me with system variable for Higher Edu Cess to use in PLD regards