It truncates images that are normal in Safari. Can I send you screen captures to illustrate?

Go to this site:
http://www.howtosucceedbroadway.com/
On the right there are three prompts, How to get tickets, etc. Only in my Firefox it only says: "How to Get..." The word "Tickets" is cutoff, as are the ends of the other two prompts.
This does not happen in Safari.
What gives?

That maybe caused by the font. For that first 'How to' link a font-size of 36px is specified (.blue). The others have a font-size of 24px. It works for me if I allow the web page fonts, but not with a wider font like Verdana. If you do not see the full text then it may wrap to a next line and not show because of that.

Similar Messages

  • About viewing images that are not the same dimensions as the iPod screen

    I sent some images to my iPod via email. I saved them to my photo library. When I went to look at them, I noticed something odd was happening: my iPod is sort of 'stretching' the images so they fit the entire screen of my iPod, even if that means a) cutting off parts of the image (either top and bottom or the two sides), or b) is stretching the dimensions of the image to fit the screen--I can't tell which is happening, though I think the former.
    I can view the image correctly by pinching it a bit, but if I move to another image and come back, it's back to being stretched.
    I know that in Photoshop I can add a black boarder (either top and bottom or on the sides), so the image with the border matches the dimensions of the screen, but that seems like a pain in the rear to do with each image. This seems like an odd quirk of the iPod, given that they are trying to use the camera and image viewing as a selling point.
    Is there any setting on the iPod so I can keep it from doing this (I noticed that it does this even with photos I take with the iPod camera, because they have slightly different dimensions than the screen)? And if not, does anyone know the ratio (side to top) or resolution (in pixels) of the screen so I can match it.
    Thanks, David

    So generous people; thank you for your time.
    I visited the camera store and we discovered that my camera lcd was set to the maximum brightness level which completely distorted any understanding of my exposure. What I now see on the lcd in terms of ligt and shadow is very similar to what I see on my computer screen.
    Maybe you can shed light on this:
    I also may need to just upgrade my imac. On the camera store's late model imac my images were tac sharp but on my imac they look quite soft and still have less light.
    There is also still some difference in terms of color settings. My camera's colors have a brighter pinkish tone and on the camera store's imac and mine the tone is yellowish orange.
    I will try DPReview and Nikoncafe. My first step is to reset my cameras to factory defaults and then upload and compare.
    Thank you both for your help

  • On images that are long and narrow horizontally, iPhoto truncates them and automaticall crops off part of each end of the image.  How can I make it stop?

    On images that are long and narrow horizontally, iPhoto truncates them and automatically crops off part of each end of the image.  the thumbnail has a jagged, serrated edge at both ends.  How can I make it stop?

    Then I do not get your problem - you can import the photo - you can find the photo and you can edit and save the photo - what more do you want?
    By defination thumbnails are small images to help you find the large image - the large image is fine and you can find it fine - and you know it is only showing part of the image because of the "jagged ends"
    If you think think that iPhoto should display long thumbnails suggest to Apple - iPhoto menu ==> provide iPhoto Feedback
    as to your digital photoframe - contact them - in general gital photos frames display one and only one aspect ratio and any photo that is not in that aspect ratio will be modified to display - either cropped to the proper size for the frame or have 'White" space added to fill the frame - that function is totally controled by the Digital Photo frame and any otptions you have will be in the manual or on the support web site for the frame - to put it in old film terms - you can not put an 8x10 print in a 5x7 frame unless you cut the photo down (or a 8x15 photo in an 8x10 frame either)
    LN

  • How can I display images that are not included in any collection?

    How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

    Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

  • I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

    I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

    If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

  • Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

    Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?  Or do I have to click each one and write down the image name by hand?
    Thanks!
    LJ

    Alternatively use a browser:
    Use the Firefox Web Developer Toolbar
    https://addons.mozilla.org/en-US/firefox/addon/60
    Images > View Image Information
    or the List All Images Add On for Firefox
    https://addons.mozilla.org/en-US/firefox/addon/3688
    or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

  • What type of blank DVD should I use to record photo images that are on my drive E

    I own a HP Pavilion dv5000 with an RW DVD + R DL multi recorder.  My question, which type of blank DVD should I use to record images that are on my drive E?  I can record without problems on a CR-R but when I try a blank DVD-R it won't work.  Please advise.

    Hi,
    Back to the good old days, HP supported only DVD +R discs, some vendors supported DVD -R discs. Now all vendors support both. You may want to try blank DVD +R. Hope this works. Please post back the result.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Report with images that are on a directory

    I want to create a report with images that are on a directory
    of the application server ...
    It is possible ??

    The version is Application Server 9.0.4 and 10G
    but i think that it is no important
    The report run on the same server where there is the Directory.

  • I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

    I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to  how I can fix this?

    If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
    To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''scan''' and pause while the list is filtered
    (3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
    Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

  • What I'm trying to do is when I scroll down the page have the images that are on the page stay the same look as I scroll

    What I'm trying to do is when I scroll down the page have the images that are on the page stay the same look as I scroll

    Use the scroll motion tools and set the settings all to 0

  • Is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?

    Hi there.
    i have set my links to be black in my page properties.  i have somes images that i am using for links and i do not want the to have a black box tracing their outline.  it's messing up my design and tables.  is there a way for my images that are links NOT to be denoted by whatever color i set my links to be in my page properties?
    see attachment.
    thanks for sharing your knowledge with me.
    gina

    If you would like your NON-linked images to have a border, and only remove the border from linked images then this css:
    a img { border:none; }
    E. Michael Brandt
    www.divahtml.com
    www.divahtml.com/products/scripts_dreamweaver_extensions.php
    Standards-compliant scripts and Dreamweaver Extensions
    www.valleywebdesigns.com/vwd_Vdw.asp
    JustSo PictureWindow
    JustSo PhotoAlbum, et alia

  • Will Blurb correct images that are too light or too dark to print nicely?

    I have two calibrated monitors and am submitting a book to Blurb. One monitor  is brighter than the other--, that the images look fine on one and too dark on the other. I could changed the brightness, but how do I knwo which is correct for Blurb?what does Blurb see and do they correct images that are all too dark or too light?

    Blurb does not correct anything in the uploaded pictures. This is stated clearly on their website; read up under <Color Management>.
    It does not matter at all if your image looks fine on the monitor. What matters is if the color numbers of the image are correct. Blurb will print according to the color numbers.
    The color numbers of your image will be displayed correctly on the monitor if it is properly calibrated to the industry standard of 6500 K and a gamma 0f 2.2 and if the intensity (brightness) of the monitor is set correctly.
    Do this: calibrate both your monitors and set the target value for brightness (intensity) to a value between 100 - 110 cd/m2. This value is considered correct as it will give you prints that match the monitor in brightness.
    The best test for checking for how images will look in a blurb book is this: Print the images as sRGB on your own printer. You can do this in two ways:
    a) Export the image as JPG in sRGB in the size it will be printed. You can do this from the Book Module, Re-import it into Lr and print from Lr.
    b) Don't export the image just print from Lr by selecting <Managed by printer> as the profile and set your printer to sRGB.

  • Displaying images that are accessed through URL

    Hi,
    I have trouble displaying images that are accessed through URLs in my report.
    If I call the URL directly in the Browser the Image can be opened without problems.
    The images can be accessed with an anonymous access.
    When I deploy the report or in the Preview of Visual Studio I get the following message:
    [rsWarningFetchingExternalImages] Images with external URL references will not display if the report is published to a report server without an UnattendedExecutionAccount or the target image(s) are not enabled for anonymous access.
    In Layout View of Visual Studio the image is showen correctly.
    The Images are stored on a Solaris maschine with WebSphere 6.0 as WebServer.
    Any ideas?
    Thank you.
    Frank
     

     Rain3 wrote:
    * Create a new IIS Virtual Directory pointing to the share:
    ** Open IIS Manager on the reporting server (eg. REPORTSERVER ):
    ** Create a new Virtual Directory (Web Sites --> Default Web Site --> New --> Virtual Directory)
    ** In the Alias prompt, type some name (eg. Pics) and in the Path prompt, specify \\SERVER\imageshare . Other options should be left default.
    * When designing reports, use "http://REPORTSERVER/Pics/somepicture.jpg" as the "Value" property for images.
    I have followed these steps but I still can not get the images to display.
    Our reportserver resides in the directory of another website rather than the default site.  I would assume that I would still follow the same procedure that you have listed but it did not help.
    Does anyone have any other recommendations?

  • Why does Photoshop produce images that are from source data Photoshop can't read?

    I am getting this message "This image was generated from source data that Photoshop cannot read.  That data will be discarded."  When I open the image the data that has been discarded consists of the layers that were created in Photoshop.  I don't understand why Photoshop can't read data created in Photoshop.

    Thank you for the info.  I only have one version of Photoshop on my computer.  The one I created the images with won't open them.  However, I did have a version of Lightroom on my computer that I removed today.  It was newer than my version of Photoshop.  I am hoping that without Lightroom on my computer I will not have any more problems. (cross all my fingers)  The images that are corrupted are missing data.  The Metadata is missing and the layers are missing from the files. If the metadata is missing they won't open at all and if the layers are missing they will open up flattened, some of them are corrupted with data and color switched every which way in the image.

  • False returns - search brings back images that are not tagged

    If I search on, for example, "Bag", I get all the images that I have tagged with "Bag", but then get a whole load more that do not have that word in their keywords (not even as part of another word) - where is the search engine finding the word "Bag"? I have had this with some other words too... Any ideas?

    The search has many options, some loose some tight. Seems like if you have "contains" and "all criteria met" it should exclude all images that are not tagged "bag". If you have "any criteria met" then you could get other files, but still seems like "bag" would have to be in there someplace.

Maybe you are looking for