It will noMy screen has a "10:01", a large battery symbol, and a right-pointing arrow on it. There is nothing else on the screen.
My screen has a "10:01", a large battery symbol, and a right-pointing arrow on it. There is nothing else on the screen. It will not power off and plugging it in to the computer has no effect. Is my battery bad?
If you mean this sign, dont worry, you just have to leave it connected or charging for at least 2 hours.(80%)
After 30 minutes there will be some green area on the symbol, replacing the red area.
But preferably leave it charging for 4 hours till full charge.
Have a nice day!
Similar Messages
-
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
HT4150 updated and now there is nothing comes on the screen?
I've updated and after rebooting nothing comes on the screen?
Updates are best done one at a time, in my opinion.
Reinstall with the 10.6 DVD again, and once installed ignore all the other offered updates (deselect them) and only update to 10.6.8. If that sucessfully restarts, then choose the other software updates one by one. That's my update voodoo rule No 1.
Don't use you computer while updates are being done. Just wait. That's my voodoo rule No 2. -
Hi. So I dropped my iPhone 4s on the floor, and now my screen won't display anything, but it still plays sounds, for example when someone rings or text me.
Please help me ASAp, and I will be grateful for any helpTry a reboot, hold both the power and home buttons until the apple logo appears and it restarts, if it doesn't "appear" but does restart, does it then turn on?
If not, time to visit an Apple store genius bar and have the techs run some tests to see what is wrong. -
help me to troubleshoot my ipad2 there is software update and i updated mine from 5.0 to 6 version but now the screen shows only usb cord arrow up sign then itunes and music logo. it has been like this since last night.what i will do?i even tried turning it off but it doesnt work too. i only see the apple logo and it comes back to cord image and itune then after 30 secs the screen turns black. help me please.
The iPad is telling you to connect your iPad to iTunes on your computer so do it. You may have to restore the device.
Restoring iOS Software.
http://support.apple.com/kb/ht1414
You may need this as well.
Unable to update or restore iPad.
http://support.apple.com/kb/ht4097 -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
-
Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are
(Apologies for butting in wiclee.)
The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
iTunes 10.1 Missing Text -
My iPad was either stolen or lost and was in my luggage. Is there a way to tell the last time it was turned on. If so this will tell me if anyone has it.
If you have an iCloud account and Find My Device was enabled on the iPad, you could try to find it using the iCloud.com web site. Otherwise there is no way to find it.
You need to change all your online passwords immediately; notify the airport at which it went missing from your luggage (assuming it was at an airport); notify the police; notify your insurance company so you can get reimbursed and buy a new one; move on. -
I just bought and iMac and have lion installed. I'm trying to use interactive graphs at yahoo finance. Nothing shows on the screen. I assume I have to download something but don't know what or where.
WhyWontThisWork:
I can definitely how frustrating it must be to not be able to take pictures or even view pictures that have already been taken with your LG Dare.
Since this problem has started, have you tried to either:
a.) put that memory card in an alternate phone to see if the pictures can be viewed on there
b.) use a card reader/adapter in a computer to see if the pictures can be viewed on the computer
c.) take the memory card out of the phone and then try to take a picture?
What I am trying to determine is which of the 2 is defective (phone or memory card)
If you are able to view pictures in another phone, or on the computer , then you may have a bad card. If that is the case, you can transfer the pictures to the computer and then format the memory card by
Note: This procedure will erase all data on the memory card. It is recommended to back up the data.
From the home screen, touch the menu tab.
Touch Settings.
Touch SD card & phone storage.
Touch Unmount SD card.
Touch Format SD card.
Once you have done the formatting, try to take pictures again. If you continue to have problems it more than likely is the phone.
Also, in order to access PixPlace, log into your MyVerizon account, at the top, you should see "Messaging" go down to "Manage your photo albums" once there, you should see "My Media", however, if you have already received a message advising you that your album would be deleted if you haven't logged on in more than 180 days, all pictures have then most definitely been deleted. Again, we do send warning messages once the online album hasn't been accessed in 150, 175, 180 days respectively prior to deletion. -
I am using a very old iPhone and have forgotten my password. Is there anyway to get passed the lockout screen? It says to connect to iTunes but when I do nothing happens. I've read through the user guide and am at a loss.
Bypass & Reset the iPhone Passcode
Disconnect the USB cable from the iPhone, leave the other end connected to your Mac/PC
Launch iTunes
Press and hold the Home and Power button on the top of the iPhone to turn off the device
Press and continue to hold the Home button while you reconnect the USB cable to your iPhone, this will cause the iPhone to turn on
Continue to hold the Home button until an alert message in iTunes appears that an iPhone in recovery mode has been detected
Now that the iPhone is in recovery mode, you must restore the device:
From iTunes, look under the “Summary” tab
Click on the “Restore” button within iTunes -
A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHeroIf you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else ) -
Just bought brand new new iMac. When browsing in Safari, sometimes the text suddenly gets super large. I'm doing nothing except reading the screen, tho I usually have my hand resting lightly on the mouse. I can get back to normal size by clicking "actual size" in View. But then it does it again a minute or two later. What gives? Something seems defective--but what?
From System Preferences, Mouse, Point & Click, Secondary click. Go to it hover over Secondary click and watch the short video sequence change it left right, left right, you will see exactly what is does. No I do not think your Mouse is defective, you simply need to take control of your Mouse finger.
-
When I plug in apple tv the status light just blinks amber and nothing appears on the screen
When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?
Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this. -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
ITunes crashing when iPod is connected
iTunes has been crashing on my computer for the past few weeks some (not all) of the time when I connect my iPod for updating and recharging. The program doesn't quit all the time, as I stated, and it never immediately repeats itself when I relaunch
-
When opening Notes on the IPAd it stays open for about 10 seconds then closes
When open Notes on the IPas it closes after about 10 seconds so can not use notes
-
I can't activate FaceTime & iMessage
Dears, Yesterday I have been doing service (Find My iPhone) my wife Has erred and pressed on ( Erase iPhone ) and Already been cleared Contents, After that my wife was running iPhone. But there are two problems: 1 - can't activate FaceTime by ph
-
Quicktime shuts down when i try to export
I have 60 gb video ipod and i'm tryin to transfer video to my ipod. I converted them to .mov files which from what i gathered on the FAQ page it should allow them to play. I just have to export from quicktime. BUT, everytime i click export file quick
-
Hi, Do CE EHP1 supports KM/Collabration? What is the difference between CE and Portal? When we can suggest to a client to implement CE?If he already using EP including KM?? When CE 7.1 EHP2 going to release?any links for CE EHP2? Regards Ravi