It won't let me install because I'm not the administrator.

See, I bought this computer used (imac g3 os 9.0.1), and I changed the settings to that there would be different accounts and stuff, so that the children wouldn't be able to get into my computer and read my stuff. So, since I made a new account for myself that's different from the admin, there are limitations...how do I install os x? It won't let me because I'm not the admin...
Thanks!

Hi Again Lady Kathryn Depaul!
Check this page Firmware Update, and see if you can identify which of the iMac models you have.
The correct Firmware Update, can then be downloaded from there.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
But before that can be installed, you will still probably need an Admin password.
So I think you will need the OS 9 system discs first.
Discs are available from AppleRescue.
ali b

Similar Messages

  • TS1629 my computer is not letting me update itunes because "I'm not the administrator" (which I am)

    I've been trying to download the latest version of itunes for a couple days now. Everytime I did it, i twould go almost entirely through the download process and right at the end it would say it couldn't finish because i don't have administrator rights.
    Last night I decided to see if I could figure out why it was saying that, if some how my settings were changed.
    Everything I found, it looked like I was administrator.... this is my first issue
    Also, when trying to figure out the admin thing. I ended up deleting my itunes. I tried to restore my computer and bring it back, but only parts of it came back. So I dont know if I need to completely uninstall itunes to be able to reinstall?
    But first I have to figure out the admin thing
    Thanks

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • HT2311 it won't let me install because I don't have 10.6.8 updated version?  I have checked for updates and nothing comes up.  I can't access Itunes to download Iphone photos etc....

    Itunes doesn't recognize my Iphone 4 or Iphone 5.  I get a pop up that says it requires me to install Itunes updated version of 10.7 to access my phones. 
    When I go to install version 10.7 it says I can't because my system needs to be updated to version 10.6.8? 
    Need some advise on my next step.

    If you're on a Leopard operating system (10.5.8), you're not going to be able to sync to the iPhone 5. (The iPhone 5 needs iTunes 10.7.0.21, and that's only available for Snow Leopard, Lion or Mountain Lion.)
    You should still be able to sync to the iPhone 4S if you've got iTunes version 10.6.3.25 installed. (Your Leopard operating system supports that.)
    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • Windows 8.1 won't let me install Reader when logged in as administrator

    Are there any fixes to this problem?

    1. Do you have Adobe Reader already? (In START menu?)
    - It does not appear to be in the tiles anymore.- When I checked a file folder with pdf documents there is a different adobe symbol - sort of looks like a red hand with three fingers.- When I click on this some sort of adobe reader starts and I can read the document, but there is no menu or other info. When I right-click a limited menu pops up on the bottom of the screen "one page", "two pages", "continuous", "print"
    2. If so, what version is it (Use Help > About)?
    - there is no "help or about" available on the above screen when it is open with a document in it
    3. What is the wording of the update message?
    - Starting with the installation there are a series of messages in the installation window ...- "extracting files ..."- "Make Adobe Reader my default PDF viewer"- "Install Adobe Reader ... to C:\Program Files (x86)\Adobe\Reader 11.0"- Choose "Install updates automatically (recommended)" - "Copying new files ..."- A warning box pops up - "Error 1303. The installer has insufficient privileged to access this directory  C:\Program Files (x86)\Common Files\Adobe\ARM\1.0. The installation cannot continue. Log on as an administrator or contractor your systems administrator."- The only option that works is cancel. This reverses the installation "rolls back the installation"- The recently created folder "C:\Program Files (x86)\Adobe\Reader 11.0" is removed.
    4. Where did you download the install file?
    - http://get.adobe.com/reader/- saved to the "Downloads" folder- the file is "AdbeRdr11009_en_US.exe"
    5. I checked the folder "C:\Program Files (x86)\Adobe\Reader 10.0"
    - When I click on the folder it does not let me open the Reader 10.0 folder - It says, "C:\Program Files (x86)\Adobe\Reader 10.0 is not accessible. Access Denied" 
    6. I checked the Task Manager to see if there was a program that might be checking for Adobe Reader updates - nothing obvious
    7. I checked the Control Panel, Programs and Features - there is no Adobe Reader. There is an Adobe Digital Editions 4.0 which I installed to read some epub documents.  Also, did not see any suspicious looking program.
    Thanks
    George

  • You won't let me export bookmarks to html you say I'm not the administrator but I am

    I am interested in dual booting to Linux. However I need to export my bookmarks. I've always been able to export my bookmarks to an html but now you say I Can't because I'm not the administrator?! I am the only user and run as administrator. This doesn't make sense.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • I dowloaded an album to my iPad from iTunes and now I have no iTunes app and all music on my iPad has disappeared. My iMac won't let me sync because it thinks all my music is already installed/

    I dowloaded an album to my iPad from iTunes and now I have no iTunes app and all music on my iPad has disappeared. My iMac won't let me sync because it thinks all my music is already installed/

    You now need to get your pictures back! The similar to you, after I updated my iPad Mini, I can't get my some files on device. I tried many ways, fortunately, I got a tool from http://tinyurl.com/Data-Recovery-iPhone to help me recover lost files easily! It supports iPhone, iPad, iPod, etc iOS devices!

  • I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

    I purchased Adobe Illustrator CS2 on CD many years ago and now i have bought a new iMac computer it won't let me install from the CD's. How can i use this product on iMac ?

    Because the Nano was previous synced to another comuter/iTunes library.
    See the following:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • Mommy won't let me install QTJava

    I've given up on JMF because of its lack of support for media formats that people actually use, so I'm following the advice of others on this forum and will attempt to try QuickTime for Java as an alternative.
    The problem is that the QuickTime installer won't let me install QTJava because it complains (incorrectly) that I don't have a supported VM.
    Any idea where I can get a QuickTime for Java installation without mommy looking over my shoulder and commenting on my VM, or how to get around this problem in general?
    I apologize for positing here, but I couldn't find a counterpart forum on Apple's site.
    Thanks in advance for any assistance

    Since you have a choice of JVM's, I'm assuming you're on Windoze? I think QTJ only runs on the Sun JVM -- not Microsoft (duh) and not IBM's (darn). Also, I'm pretty sure it's not ready for 1.4 yet.
    Most Apple stuff is on listservs instead of web-boards. Check out the quicktime-java list at http://lists.apple.com/mailman/listinfo/quicktime-java
    --invalidname

  • Download error in creative cloud, won't let me install updates.

    download error in creative cloud, won't let me install updates.
    Evert time I hit reload, It keeps saying download error.
    I uninstalled the cloud, and Re installed it, and still have issues

    Quading2390 make sure that you are browsing to the User/<UserName>/Library folder.  You can see an example screen shot below.

  • HT4623 I have an iPhone 5. I've downloaded the iOS 7 update but it won't let me install it. Is anyone ells having this problem and what can I do?

    I have an iPhone 5. I've downloaded the iOS 7 update but it won't let me install it. Is anyone ells having this problem and what can I do??

    I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

  • I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for intallation. It shows it installed and won't let me install it.

    I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for installation. It shows it installed and won't let me install it. I doubled check everything on my computer and it is not installed. Even more, all my PDF files now show an HTML extension rather that PDF and only opens in my browser, which means the program is not here.
    How to re-install it, please, when the CC panel installer won't let me do it? Thanks!

    Try "Pacifist"!
    Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

  • After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

    After I loaded Mac OS lion, it won't let me install my Sierra Wireless telstra. It keeps telling me to install it even though i already have. help please?

    Check for new 64 bit software for the modem, other wise you I'll probably have to boot your Mac in 32 bit mode first.. And then every time you want to go online.
    I have the Sierra wireless 306 and have their 64 bit lion software installed. Works well.
    Best.

  • Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro but stuck with QTX. Downloaded QT7 but it won't let me install it. Any suggestions? B

    Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro as standard but stuck with QTX. Downloaded QT7 but it won't let me install it. Says I can't do install as I already have QTX. Does FCP not come with QTpro or am I jsut being stupid. Any suggestions would be great. Thanks.  B

    Hi there,
    Are you running Lion or Snow Leopard? either way this may help by the looks of it.
    http://www.macworld.com/article/161320/2011/07/lion_quicktime7.html
    cheers
    Andy

  • My iMac won't let me install anything.

    I have no idea what is going on. I won't let me install the simplest software. My OS X is up to date and I have a ton of HD space.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • TS3297 Cannot remember security answers ...I can get into my account but won't let me purchase because I'm buying off a new I phone or a new laptop .. Spent 45 min on hold last week to be then told someone would contact me back never happened

    Cannot remember security answers ...I can get into my account but won't let me purchase because I'm buying off a new I phone or a new laptop .. Spent 45 min on hold last week to be then told someone would contact me back never happened

    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • CUCM, Why do we have to install firmware in every CPE?

    Hi people, I was wondering, (and I'm sure I DID read), on some CUCM documents that when we upgrade a firmware for a Phone, we have to upgrade the firmware in every CPE (Active Call Manager Node), and on the TFTP server, then do a wide cluster restart

  • Outlook 2007 Print Preview/Print error after KB2509470

    Are others running into print preview or print error message after installing MS KB2509470?  Our environment XP Pro 32bit, running Office 2007 Std SP2 with latest patches from MS.  Ricoh and HP Printers.  If we uninstall this KB, problem is resolve.

  • Create Recovery drive

    I'm using HP ENVY TS 15-Q006TX with Windows 8.1 x64  I have deleted the recovery partition along with everything it contained can how can i make a new partition and a new recovery image for a frsh windows install that came straight out of the box

  • Spotlight reindexing after abnormal power down

    My Macbook will occasionally fail to put itself into proper sleep mode, and instead will power itself off entirely. That's a separate issue, but on Leopard this event causes Spotlight to reindex on the next restart. Could be normal in response to an

  • Iphone 4s Error 1

    While restoring my  4s in Itunes, ive got a unkown error 1. What to do? I already tried in DFU mode. Greetings