It worked then it didn't

Hi, I installed the airport express and at first it work fine.
Then I ran the software update that was released in May. It has not worked since.
The light flashes amber and the device can no longer be picked up when scanning.
Help please?

The upgrade itself is buggy.
What many did to solve to problem was a combination of reverse to the 7.3.0, factory resets, and base station restarts. The finally, upgraded to 7.3.1 again.
There is no magic formula.

Similar Messages

Wireless network worked, then it didn't

I set up my two iMac's and one MacBook Pro (all C2D) on a Verizon DSL network using a Model 327W Verizon modem/router. It was plug-and-play. Everything worked perfectly -- wireless included -- the moment I plugged it in.
Now the only computer that works wirelessly is the one I set the modem/router up on. Is this a MAC address issue? My Airport is giving me the following message in the Network Status: "AirPort is connected to the network XXX. AirPort does not have an IP adress and cannot connect to the internet."
I added the AirPort addresses for each iMac into the router set up and gave them "permission" to gain access to the wireless network and that didn't work.
Caveats:
Both of the other computers (the ones that no longer connect to the network wirelessly) connect to the modem and the internet when I plug the ethernet cable into them.
When I manually configure the IP Address, Subnet Mask and Router to match the settings of the computer that does wirelessly connect, I get a GREEN light from my AirPort along with the following message: "AirPort is connected to the network XXX. You are connected to the internet via AirPort."
No, I'm not. Even though it says that, I still can't access the internet -- which makes me think it may be a firewall issue.
Help! I've got all my office computers connected to the network with ethernet cables until I get this resolved!
Thanks!
Doug
iMac 2.16 GHz C2D Mac OS X (10.4.9)
iMac 2.16 GHz C2D Mac OS X (10.4.9)
iMac 2.16 GHz C2D Mac OS X (10.4.9) MacBook Pro 2.16

Geoff93 wrote:
I think imjolly meant un-installing it not installing it - its a useful coaster,... etc
thanks Geoff93 just trying from HTC and almost got spelling correct
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

This query worked, then it didn't with ORA-00600

select decode (level, -1, -1, -1) initial_level,
level node_depth,
decode (level, 0, parent_id, child_id)||' '||rule_desc node_label,
'expand' node_icon,
child_id node_data,
parent_id node_parent
from rule_tree, rule_master
where rm_id = child_id
start with nvl(parent_id,' ') = 'MASTER'
connect by parent_id = prior child_id
select decode (level, -1, -1, -1) initial_level,
ERROR at line 1:
ORA-00600: internal error code, arguments: [12406], [], [], [], [], [], [], []
Anyone know why this code once worked but now doesn't and what does the error mean?

http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref371
http://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-00600%3A+internal+error+code&objID=c84&dateRange=all&userID=&numResults=15&rankBy=10001

Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

Hi, I just picked up my phone to check the time, and it was off, which was weird because I just checked it a minute or so before. i tried to turn it on, which didn't work, then i plugged it in, and it has still shown no sign of life.. what do i do?

Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo, ignoring the off slider that appears first, then release.

Headphone output Worked then didn't

Somehow I have push a wrong button. Logic doesn't provide output to my headphone output on a G5. It is not the OSX preferences as itunes still works fine.
Logic Express 8 worked as I wanted and then it didn't. Clearly user error. But I don't know what.
Thanks for any input.
LMP

OK, I answered this one myself.
Preferences
Audio
Devices
Core Audio
Now I have to do a bit of mixer reconfiguration to get what I want.
Thanks to any who read and thought about it. LMP

Onboard HDMI half-works, then gone entirely on new build

Hello,
I built a system today with these specs:
Mobo: MSI 785GM-E65 (AMD 785G chipset)
GPU: (Integrated) Radeon HD 4200
CPU: Phenom II X2 550 Black 3.1ghz w/ Stock Heatsink-Fan
RAM: 6GB DDR3 1333 PC10600, Crucial Micron
Case: MicroATX w/ Antec 550W ATX PSU & 80mm Fan & 60mm Fan
OS: Windows 7 Professional x64
HDD: Western Digital 80GB ATA100/IDE
Peripherals: GIGABYTE AirCruiser G PCI Adapter, ASUS Internal CD-RW, Samsung External DVD-RW, PS/2 Keyboard, USB Mouse
Monitor: Westinghouse 19" HDTV #SK-19H210S
To summarize, my first problem was HDMI video- and audio- output instability(read below for description) but this has been superceded by a new second problem -- not getting any HDMI output at all!
As soon as I completed the build, I connected my chip's HDMI-out to my HDTV. The system POST'd successfully to HDMI video out and I was able to install Windows without a hitch.
From the start, there was video instability. The display would go black for an instant and immediately re-appear. HDMI audio crackled on any UAC (User Account Contol) prompts and any fullscreen events like maximizing/minimizing from a fullscreen app/game. (The crackle was only for a split second and sounded like the noise you might get from any speaker if you yanked the audio input source out when it was on higher volume.) The display black-outs improved upon driver updates(though I only used the system for an hour or so, so possibly not sufficient sample to be representative). The audio crackling on UAC/fullscreen events remained.
Apart from the crackling noises on UAC and fullscreen events, audio sounded fine. It played any of the Sample Music tracks included with Win 7 great and clear...
To troubleshoot the video/audio issues, I swapped the HDMI cable connection for a VGA cable and Speaker analog cable. This worked perfect--no issues. So the video card and sound controller seemed to be functional--it was an HDMI port issue...
I swapped the VGA cable and Speaker analog cable back to HDMI ... and the HDMI video output would no longer work. Stranger still, HDMI video output will not even appear for the POST, let alone Windows 7.
I have since uninstalled and reinstalled the OEM disc drivers, the AMD-ATI website's latest drivers, the MSI(chipset manuf.) website's latest drivers ... no dice. I have booted and played with all combinations of HDMI/VGA cable sequences(leaving both plugged, HDMI plugged while booting and changing later, just lots of weird stuff that didn't accomplish anything).
The HDMI cable and HDTV work. I can successfully connect my laptop's HDMI out(Nv9300GS card) to the HDTV and display fine.
I am now running multiple displays and I have connected my VGA to an old CRT monitor(works), and the HDMI to the same HDTV. The VGA/CRT display works. The HDTV display is not detected whatsoever, and the ATI HDMI Audio Controller device is "unplugged" in the Select Audio Output dialog ...
I have now formatted and re-installed Windows 7 with this same VGA->CRT monitor and HDMI->HDTV multiple displays setup... and it still only detects and uses the VGA->CRT monitor.
Please advise... how I may troubleshoot and resolve these problems. I would like to get HDMI working on this system again, and also resolve the audio crackling issue.
I plan to flash the BIOS tomorrow (eek) from 2.1 to 2.3 after I borrow a friend's USB flash drive, though there doesn't seem to be anything in the changelog for those versions that sounds like it will help.

Quote from: Bas on 25-November-09, 16:51:55
Have you tried W7 32bit?
I only have a 64bit license / disc for Windows 7.
Quote from: faugusztin
2 possible causes :
1) irregular blinking - try to disable TMM (Transient Multi-Monitor Manager) task : http://www.tomstricks.com/how-to-disable-or-enable-the-transient-multimon-manager-tmm-in-windows-vista/
2) if videocard doesn't see the TV, then it's usually the worst thing which can happen to a display device - EDID of the device got damaged. Try to change the cable, if it doesn't work then try to check the TV through another HDMI device (see if it works). If not, then you have a problem...
That appears to be a Vista task or a task unique to laptops? I couldn't find it on my desktop Windows 7 system.
HDMI cable and HDTV work with a different system(Asus N10 laptop with Nvidia 9300GS HDMI out).
HDMI out has worked *once* randomly since posting my original post here. Yesterday morning I booted up the PC with both VGA and HDMI out connected to my HDTV -- and surprisingly, Windows 7 loaded with HDMI out configured for a Main display and VGA out configured for the Extended display. I restarted and the HDMI crapped out again--only working with VGA as before. I haven't been able to duplicate this... but it must mean the EDID isn't dead?
Quote from: Fredrik
Is this relevant:
http://74.125.77.132/search?q=cache:cdO8fInajngJ:www.amazon.com/Westinghouse-SK-19H210S-19-Inch-LCD-HDTV/dp/B000NIK9V4+Westinghouse+19%22+HDTV+%23SK-19H210S+problem&cd=1&hl=sv&ct=clnk&gl=se
Meaning, it might actually be the monitor, Westinghouse, that has a problem. ...There are actually caps that might leak in them, too. Wink
It's possible... but I am not certain as HDMI in works from a different system(my laptop).
I just finished flashing BIOS and re-formatting and re-installing Windows 7 and all drivers... Problem persists- VGA out works great, and HDMI out does not detect anything.
Any ideas? I do have a PCI-E 2.0 16x port to upgrade to a new dedicated video card with a new HDMI out port, but I'm postponing that purchase until I need more GPU power. (Also: My monitor is still under warranty...)
Patrick

My lock button doesn't work. It didn't break, it just stopped working

Ok. So apparently during a workout outside, my brand new, month old iPhone 4S decides it wants to workout too. So I brought it to my workout, put it in a backpack, and set the bag down as I normally do. The dew on the grass that morning apparently casused enough condensation to trigger my litmus paper, and now my brnad new iPhone has no warranty, hence my question here. I have been searching for a week or 2 now on information for this, and can find nothing. Apple will do nothing but tellme they can replace the phone for $200 but then won't wanswer questions about the issue itself, and I seem to be the only iPhone owner in the world with this problem, so it's nowhere on the intarwebz.
So my lock button, up top, on the shoulder, stopped working. It didn't break, it didn't get stuck down, it just stopped working. Like, the screen flashed (go to wake the phone up, it didn't wake up, so I pressed the button again, and it flashed on and then off again real quick, like normally would). Hit it again, nothing. Hit the Home button, woke up. Played with phone, etc, went to put to sleep...... nothing. Hit the button multiple times, nothing. Button still clicks down and functions as the button itself should, but no sleep or wake. The button only actually does what it's supposed to do when I hard reset, or the phone is off and I'm turning it on. I can't take a screenshoot of the phone, and every now and then my phone will be just sitting on the table or wherever, and it will wake up, the "Slide to Close" bar pops up, and then 15 seconds later, goes back to bed.
Has anyone else experienced this issue, and what should I look at fixing inside? I have not taken this one apart yet as I don't have the tools anymore, waiting on them to get here, but I figure Apple has screwed me on my warranty, so I'm just going to fix it myself. Never had this specific issue before, so I'm not really sure what the **** is messed up until I can take a look inside. Any help until then would be wonderful. Sorry for the long back story, and thanks for looking.

Your problem is rare from the symptoms you describe. Most lose the click function, yours still has it. Yours functions sporadically or only for certain functions. Maybe it is liquid damage causing this. Maybe it will dry and be OK.
While waiting for your Pentalobe Screwdriver, try a Firmware Restore with iTunes. See if this helps. If you still decide to procede, the first step inside should be to carefully disconnect the battery at its connector. Also all the screws inside are different sizes, except for some of the Screen screws, so keep them well sorted.

If your preview/capture settings work, then the don't, try this.

Long story short, I've posted numerous times with capturing problems. What worked Friday night didn't work tonight - I had shut down the system over the weekend. In order to preview and capture again, I had to open a QT movie and play a bit. I kept QT open, and then went back to my FCPro project and had preview and capture.

Google 2-step verification works very well with Mac Mail and is a good option for increased security. If you are using a mail client you simply need to use an "application-specfic password" instead of your normal password. That is described in the following Gmail support article. https://support.google.com/mail/answer/1173270?hl=en

Why 3G cannot work if i didn't power off my iphone 4s?

why my maxis 3G cannot work if i didn't power off my iphone 4s?

You can use Assistive Touch:
http://support.apple.com/kb/HT5587
Once Assistive Touch is turned on:
Tap the dark circle to open the Assistive Touch menu, then tap "Device" and tap and hold the Lock Screen icon. This will bring up the iPhone's Power-Off slider.

My download appears to have worked, then it tries to validate, fails and says Software Update Unavailable - has happened 3 times so far

My ios 7 download appears to have worked, then it tries to validate, fails and says Software Update Unavailable - has happened 3 times so far

Thanks - I didn't realize there were separate validation servers. I've continued to try - 3 more failures - I will keep trying. The download worked in a timely manner so I thought I was "over the hump" :-)

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

Help !! Safari always crashes ! It sometimes work then doesn't load the pages thought time warner cable tells me my internet is working. What can i do ?

all is in the title , my airport is conected , internet is connected , but safari always crashes !!!! Its gonna work for 5 minutes then crash for 10 minutes , then work again ! then stop again i really want to fix this problem soon please help me !

There are a number troubleshooting steps you can take. I'd start by restarting in Safe Mode, this will clear some caches. It's possible one has become corrupt. If that doesn't work try downloading some other browers such as Firefox or Google Chrome. If those work then it points the finger at Safari. You can re-download and install Safari too. Next in Safari you can do some maintenance, by resetting Safari and clearning it's cahces.
Try those and if you still don' t have any luck post back and we can try some other ideas.

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES. Maybe this is because of the new release ios 8.1 where after the update it went recovery mode then i didn't restore, i set up a new ipod. What's wrong? Is ths bcoz of ios 8.1?

My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?

How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

TS4268 I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off but my acc. is being charged.what to do?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

I am being charged for international msgs which i haven't sent to a number of the UK.i tried to activate my iMessage and FaceTime using wifi but then it didn't connect. all settings have been turned off in my phone! i also have reset my phone with all the settings. but when i contacted my carrier, he said that the balance deduction is because of the international messages i have sent, but i have sent NONE! every time i switch on my phone, balance gets deducted. imessage and facetime are all disabled! but then the problem started since yesterday when i tried to activate them but had disabled them all at the next moment! but the charges are still being applicable for some international messages as per my mobile carrier. what to do? is there some problem with my phone or carrier?

Premiere Pro CC slows down, then stops working, then won't work, then it won't quit

Premiere Pro CC slows down, then stops working, then won't work, then it won't quit. So I have to force quit every time.
It does not matter if I am working with HD or 4K - same thing happens.
This began happening about a week ago. Nothing really new has changed. I tried to repair permissions and check this from a new admin account because I know that is what Adobe thinks the answer to every problem is. But it did not change anything.
Mac 10.10.2
3.5 ghz 6-core
Dual D700
16GB Ram
CC 2014

Used this tip from Adobe and it worked, all running quick and smooth again.
Hope it works for you too.
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/

It worked then it didn't

Similar Messages

Maybe you are looking for