It works on my Computer, but not in my DVD Player
I burned a DVD, It works on my Computer, but not in my DVD Player...why?
still am trying to figure out how to burn at a slower speed, I see no optiond on iDVD.
You need to create a disk image out of iDVD, then burn. See below.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Similar Messages
-
Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.
Try here > http://support.apple.com/kb/TS1538
-
HELP!! WRT54G2 works for one computer, but not for the other
I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!
As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... -
TS2610 My project plays on any Mac but not on my dvd player. Please advise.
My project plays on any Mac but not on my dvd player. Please advise.
Unfortunately that didn't do the trick. For the life of me I can't figure this one out. However, if I author it using iDVD (with the same media) it works? I'd make do with IDVD if I could get rid of the Apple logo in the lower right corner.
-
Ipod works on one computer but not the other?
Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.
Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick -
Its is showing the wrong email... I can sign in on my computer but not the phone
Welcome to the Apple Community.
If it isn't showing up at all, it means that Find My Phone hasn't been activated.
If it's just the location that isn't showing up, it may well mean it isn't connected to a network at this time. -
I have tried uninstalling and reinstalling itunes i have tried messing with my avast and I cant get anything to work please help me! it works on another computer in the house but everytime i try to click on his library it says it loading his library and then stops and goes to my music. plz help!
When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems. -
Implicit read with assembly module instance working on one computer, but not another
Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related? -
ICal Subscription Works On One Computer But Not The Other
I subscribed to a web based iCal subscription. The subscription refreshes on my Mac Mini but not on my desktop, which is connected to my iPhone. The iPhone therefore doesn't get the subscription contents either. I've tried deleting and resubscribing but nothing works.
Hey Valenz0711,
That definitely sounds frustrating. There are a few different reasons it may not be working on the iMac (iTunes is not up-to-date, Firewall Settings). The following article may provide more information on a resolution:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thanks,
Matt M. -
I have a new I Phone 5 and have added a second email address. My password for my apple account will not work on my phone to download apps, yet it works on my computer. Any suggestions?
Sounds like the person didn't wipe the device first before giving to you. They need to do that with THEIR ID, before you can use yours.
-
My apple ID password works on my computer but not my Ipod
My apple ID password will work on my computer to log in to itunes and to log on to my apple account however it dosent work on my Ipod it keeps comeing up with wrong password even though i have never chaged it and will work on my computer. Help please
Go to Settings>iTunes and App Store and sign out and sign back in if you ohave not done so already
-
HT5622 My Apple ID works on the computer but not on my iphone when i try to log in
I have recently gotten an iPhone bought from someone I know.
I know the iPhone is genuin, however, my Apple ID only works on the computer and as I am trying to start up my new iPhone it isnt working?Sounds like the person didn't wipe the device first before giving to you. They need to do that with THEIR ID, before you can use yours.
-
Output from DVD Studio Pro plays on computer but not on TV DVD?
When I output a DVD from DVD Pro (16:9) it plays fine on the computer (and other computers) but not on a conventional DVD player. What am I doing wrong?
I don't want to take over this thread, but figured why start another when I am having this exact same issue. I create my project, everything is good, I simulate it and everything is good, I burn it to disc and play it on the computer and everything is good, try it in a conventional player and it says it's unreadable and kicks it out. I've tried it in Two different players that both have been able to play movies created in iDVD just fine.
I browsed my disc I created and it didn't have the standard files (VOB etc) so I thought maybe I mistakenly burned it in HD, checked the encoder settings adn they were set to HD. Fixed that so it was 16:9 SD, burned another and same exact result. Do I need to create a whole new project so it will encode the whole thing in SD? I did do a new movie track and it should have encoded it at SD but I think everything else (Menus, Slideshow, etc) are all in HD still (maybe???). Any suggestions or help are greatly appreciated. -
DVD plays perfectly on a computer BUT not on a DVD machine
Good Evening all,
Having spent the last four and a half hours trawling the internet for help on this, I can only hope someone out there can help.
I have just delivered what I thought was a pretty decent dvd master (for commercial duplication) to a client, only to hear he's unable to access the menu system (buttons & activation highlights) when he views the disc on a regular DVD player machine.
What am I not doing? I have read but not understood various explanations about an overlay. How do I tally the functions on a remote control with the functions on my menu?
It's not a complicated set up: it's four really short films on one video background.
PLEEEEEASE help me, many thanks!
Cinefilm.Apologies for my delay Nick, got exhausted and went to sleep!
Well, I've started from scratch and am about to trial it on another player BUT as the disc is designed as a commercial accompaniment for a surf product it needs to play as widely as is humanly possible.
Plus I've read this menu function issue does come up quite a lot. Simulator plays everything fine but that's because you're using a mouse and can physically move over buttons.
I'm worried I've not assigned remote control functions correctly, but the user manual is thick with other stuff and not helping me on this one specific query.
EeeEeeek? -
No audio on idvd burned disc- sound plays on TV fine but not on macbook DVD player
First time posting, so please excuse any naivete
Hi there, I'm having the opposite problem of many of the questions I've read on here- the audio on my burned disc won't play on my computer but is fine on my TV. I am running the latest version of idvd on a 2008 macbook. The music for the menu is a .m4a file (?) imported from itunes and the movie is an imported project from imovie. Both play fine in idvd preview and I have burned discs of this project before with no problems. This time I burned one disc through idvd, discovered the missing audio, deleted the encoded assets and re- encoded before saving the disk image and burning another dvd through disk utility. Both dvds are having this problem . I checked sound on my system preferences, it's on- though I can't find the "main audio" that was mentioned in another thread. Maybe I don't have enough space on my startup disk? I've been trashing some things to free up space, but I'm not sure where to check to see how much space I have.
I'm sending these dvds out as part of job applications so they need to be able to play right on whatever the reviewer uses (mac, pc, tv etc.)- is there a way to ensure it will work universally?
Thanks!Ok. This is embarrassing. Just saw that the sound was turned down on my DVD player on my macbook though not on my computer. Sometimes the simplest explanation is the best.
Maybe you are looking for
-
My iPod 30 gb works fine at home but not when I travel. I flew from SF to NYC and when I arrived my iPod showed the folder with the exclamation point. Yesterday I went to the mountains (8500 feet) and again the folder (it was working fine the day bef
-
How to produce large Files (100meters and more)?
We are currently working on an architecutre project for which we have to make printed curtains/screens. The maximum of one Curtain is about 180 meters (600ft). Over the 180 meters we have a pattern, which makes it not so easy to split files into piec
-
Input Field not getting cleared.
Hi Fellow Abapers, I have a peculiar problem. I have done a Module pool program as below. PROCESS AFTER INPUT. CHAIN. FIELD ztrsc_histh-trptr. MODULE user_command_0100. ENDCHAIN. CHAIN. FIELD ztrsc_fibld-fidocamt. MODULE user_fi
-
What's the best method to make an appointment book?
I have to make a simple appointment book program. Start/end time, and appointment within the start/end time. My first idea was to use ArrayList, but if someone knows of an easier or simpler way, it'd be a great help.
-
IsCommitted()Z method not found
I am trying to use a RequestDispatcher object to forward the output from one > servlet to another - here is the relevant code: > --------------------------------------------------------------------------