It would be nice if the IOS7 calendar in weekly view would show more

When viewing in weekly view, all-day events appear at the top.  When there are two or less, the size of that window reduces.  It would be nice if it expanded to show all, all-day events for that day.  Currently I have to scroll up and down to see them.

Hi Kathy,
No need to apologize. It's your first time submitting, so I'm going to go waaaay out on a limb & assure you that you are not being redundant!
Welcome to the Apple Support Community. Your post actually inspired me, if you will, to find a way to peruse through new music releases without having to come across genres that I absolutely do not care for... like Metal or Rap. Go figure!
Okay, what I found was that when you are in the iTunes Store, you can simply click on Music as shown below:
Then if you look over to the right just below the rotating billboards, you will see the following:
Then it's simply a matter of selecting which genre you want to see; for example:
Voilà! The page will show nothing but.... you guessed it, kathyfromindianapolis!
Then, if you want to see most of the newest releases by genre; then simply click on the " See All > " hyperlink just to the left of the 'genre selector box' & that will bring you to a page like this:
Finally, up in the top right corner, there is a 3-way toggle with a little triangle with which you can sort by Name, by Release Date, or by Featured. I believe that the default setting is 'Featured', however, I prefer the 'Release Date' as that puts it all in chronological order for y'all!
So, your suggestions are nice, Kathy, but since it would cost Apple the time involved in facilitating such a change; chances are (realistically speaking) that your suggestion(s) will go unheeded. Nonetheless, I hope that what I have found (because of your initiative) helps you come closer to what you suggested.
Best Regards,
mm~

Similar Messages

  • It sure would be nice if the under cabinet kitchen radio came with a light.

    It sure would be nice if the under cabinet kitchen radio came with a light to light up the counter top/cabinet below.  That is what is holding me back from purchasing a new radio to replace my old one.

    Hello
    Assuming that the first value is stored in row 1,
    you may use this formula:
    ="10.0.10." &(ROW()-1)
    Yvan KOENIG (from FRANCE samedi 26 avril 2008 08:54:49)

  • Is there a way to go back to the old calendar system rather than the one currently in ios7?  The ios7 calendar is cumbersome and not user friendly.

    Is there a way to go back to the old calendar system rather than the ios7 calendar?  The ios7 calendar in the iphone does not allow one to see the exact time of appointments in the month mode, it is not user friendly.  It's lost its flexibility.  How can I go back to the old operating system?

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
    You may leave comments at Apple Feedback.

  • So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

    So i was updating my white ipod touch 4th gen and i restarted the ipod while it was half way done. Then after it restarted it would crash right after the apple sign...it would turn white, red,purple,green...any ideas of how to fix it??

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    When it says restore the iPid via recovery mode, try placing n recovery mode and restoring several times.

  • Does anyone know if it is possible to change the display in week view to show 24 hours per day for those of us that work irregular hours

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

    Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
    Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
    The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.

  • TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

    In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
    Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date?  i.e. more "user-friendly" presentation?
    Thx!
    [email protected]

  • Imported ical from outlook and the date across the top of the weekly view all show the date i imported..

    imported ical from outlook and the date across the top of the weekly view all show the date i imported..

    I'm confused, what does iCal have to do with this, it seems as though you went from Outlook to Entourage, is that correct?

  • VirtualBench looks greate but it would be nice if the scope were 12 bit instead.

    The virtual bench hardware concept is awesome.   The price is right and the mix of hardware is perfect ( a small switch matrix would be a cool addition) but my only real complaint is the scope - it would be nice if it were 10-12 bit instead.   I would definitely pay an additional $500-1000 for the additional resolution.   The rest of the specs are great.

    johngardner58 wrote:
    We have been using LeCroy 12 bit scopes.  Most scopes I've seen are 8 bit.   We do a lot of small signal stuff (mV).   Differential probes can be used to amplify but we have found that extra resolution works better.   Most of the time we are analog and we really don't need speed just resolution.  I would settle for 10 bt but after having used  12 bit scope I don't think I would settle for an 8 bit scope.
    I'll have to give LeCroy a look one of these days then.  I'm a fan of Tekronix scopes.  I'm sure they have 12 bit as well, but are likely more expensive than I would want to spend for my setups.
    As far as the DMM, I've been spoiled by the PXI-4072 for far too long to want to go down to a 5 1/2 digit DMM.  Of course, the PXI-4072 also costs $800+ more than the Virtual Bench.  Might be worth the hit.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • For we network engineers: sure would be nice if the octets could increment

    For those of us who find ourselves cranking-out subnets & network worksheets, it sure would be awesome if the octets could increment as the user dragged down the column.
    In that one other spreadsheet program from that one other company that we just switched-off of in favor of Numbers, the user could enter, oh, say 10.0.10.0 in the first cell, highlight the cell, grab a hold of the bottom right corner of the cell & drag down the sheet, and you got something like this:
    10.0.10.0
    10.0.10.1
    10.0.10.2
    10.0.10.3
    10.0.10.4
    10.0.10.5
    10.0.10.6
    et cetera
    et cetera
    et cetera
    et cetera
    et cetera
    I am requesting that the peeps at Apple include this super kewl little trick that saves a ton of time. I cant really charge my clients $XXX per hour for filling-in 255 (or more)(or many many more) cells in a worksheet with single incrementing numbers. And even if I were not on the clock it would still be incredily time-saving.
    Thanks
    Cheers.
    Peace.
    Sjobeck

    Hello
    Assuming that the first value is stored in row 1,
    you may use this formula:
    ="10.0.10." &(ROW()-1)
    Yvan KOENIG (from FRANCE samedi 26 avril 2008 08:54:49)

  • Is it possible to change the Calendar 7.0 view to show 2 weeks instead of 1 week or month view. I find the month view is far too messy and the 1 week too short. To date I found the previous version more visibly user friendly

    I have upgraded to Mavericks and have found the Calendar 7.0 not visually user friendly. The week view is too resrictive and the month view far too messy. Is there any way of editting the view, the ability to change the colour and thickness of the grid lines would at least help. This version of Calendar seems to be a retrograde step.

    Agree.  Positively loathe the new calendar display - each day blends into the next and I can't get my information at a glance.  Looks like it's time to switch to BusyCal or Google Calendar.

  • I would like to format the external hard disk.  I would like to use it in Mac as well as in Windows.  What format should I do, connect to Macbook Pro? MS-DOS (FAT) or ExFAT ?

    I would like to format the external hard disk.  I need to use it in Mac as well as in Windows.  What format should I do, connect to Macbook Pro?  MS-DOS (FAT) or ExFAT ?

    success1975 wrote:
    Thanks
    1) In 'ExFAT' format, is there a limitation on the file size?
    Not one that will matter.
    2) Is 'MAC OS Extended' format, only for MAC computers?
    Yes, only for Mac
    3) What are those (a) journaled (b) Encrypted & (c) Case-sensitive? or when to use those?
    Again, only for Mac.

  • Default calendar to weekly view

    Hi All,
    I have created a Calendar region but is there any way to default the calendar to a weekly view as opposed to a monthly view? I am using Application Express 3.0.
    Thanks.

    On the page that contains your calendar, there will be an item Px_CALENDAR_TYPE. If you give it the default value of W, it will initially show the Weekly View. I tested quickly and you will also need to play with the conditions on the buttons that change the view - they are written assuming Monthly is the default.
    It would be a nice addition for us to add a selection on the Calendar Attributes page (I will go log that as an enhancement request).
    -- Sharon

  • How can you view iCal Calendar in week view on iTouch/iPhone

    If the option is simply unavailable i suggest Apple makes an update for it?
    Another question i have up is: "Why can't i see my deligates' Calanders(subscribed calanders on google calanders which is linked to iCal) on "itouch/iphone iCal"

    In a way there is an week view, showing only events, but it is the continuous List option.
    I understand what you are looking for, more of a grid, which would require Calendar to work in landscape more. I would like that too at times. You can make the suggestion to Apple at http://www.apple.com/feedback/.
    As for the 2nd part: I don't know that you can since they are appearing on your calendar as pulled data supplied from Google and not truly part of your own.

  • Convergence U2 scrolls down to 11pm at the bottom of Day/Week view

    I just noticed this on some SCSu2 test servers that I was hoping to put into production that is different from u1 and previous. When I am looking at the Calendar in Day or Week view, the events are scrolled up so that 11pm is at the bottom of the browser window. For many reasonable size browser windows, this means the normal workday hours are not all visible in the browser window, you need to scroll up to see them. Worse yet, every time you change the day, the view, add a calendar to the view etc, it jumps back down to 11pm at the bottom.
    Did I screw something up, or can someone confirm this? It doesn't seem like this behavior would be desirable and thus be an option I don't think. If it works fine for someone else I can try to install a similar system and narrow down the cause. I see this with 137631-07 and with -08. Might it be possible to get an older copy of Convergence wedged into a U2 install to avoid this if I had to? There is at least one minor fix in -07 that I would like to provide for users. We are using -04 on the working server with U1. Thanks.

    Fred@egr wrote:
    Did I screw something up, or can someone confirm this?This is a known issue that I see with my own install -- although my system doesn't scroll to 11pm but 6am. The time appears to be dependant on the browser client system time. So you should see the scroll time changing over the period of the day.
    bug #6707198 - "Calendar - auto scroll to the current time does not works when switching to Day or Week view"
    RFE #6856541 - "calendar server screen should be centered in function of the begin/end work hours defined by users"
    I see this with 137631-07 and with -08.Behaviour also exists with -09 and -10 (pre-release).
    Might it be possible to get an older copy of Convergence wedged into a U2 install to avoid this if I had to?What do you mean by "wedged"? You could in theory remove the -07 patch on a Solaris system (returning to the base Convergence package install) and apply an older Convergence patch (-04) however I wouldn't recommend it.
    There is at least one minor fix in -07 that I would like to provide for users. We are using -04 on the working server with U1. I suggest you log a Support request to get the bug/RFE I mentioned above addressed.
    Regards,
    Shane.

  • IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately

    After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
    I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
    Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
    Message was edited by: Raja Roy

    Hello all,
    I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
    My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
    Hopefully this will be fixed in iOS 4.2... :-S
    Regards,
    HAL1

Maybe you are looking for